Radwag HX5.EX-1.1,5.H1 One Load Cell Platform Scale

Platform scale with 1 sensor Radwag C315.30.F1.R. Capacity from 200g to 30kg. Readability [d] 10g. P (more)late size 300 x 300mm in AISI304 stainless steel. LCD terminal (with backlight) on platform. RS232 interface. Functions: Plus/Minus control, percent weighing, totalizing, parts counting, internal battery, peak hold, GLP procedures, animal weighing, ALIBI memory. A dual range scale can be made for an additional fee. The C315 single sensor balance is designed for accurate mass determination in light industrial conditions. It is equipped with a PUE C315 gauge with a backlit LCD display. The balance frame is made of powder coated steel with a stainless steel pan. The balance has two power sources: mains and battery.

Ramp scale with stainless-steel load cells is intended for meat, fish, pharmaceutical, cosmetic and  (more)chemical industry. The scale is equipped with LD4N system allowing lifting the platform up, useful for maintenance purposes. The mechanism enables safe platform lifting and does not require physical exertion or additional equipment. Upon platform lowering, the scale is ready to carry out measurement. There is no need for recalibration. The scale is made of OH18N9 stainless steel and is equipped with PUE H315 indicator. On a customer request the scale can be made of steel of increased anti-corrosion resistance. The length of the cable for connecting the indicator to the platform - 3m. Ramp scale with LD4N system is equipped with only one ramp. Dual range weighing instrument for an additional charge. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).

If you buy a WPY Multifunctional Scale by July 31, 2024, you will receive each of these products alo (more)ng with a FREE lifetime license for the Workflow Module. Multifunctional scales WPY series is designed for fast and precise determining mass of weighed objects in industrial conditions and with application of a modern terminal PUE7 series. Application The device features simple structure and enables maximum automation of carried out weighing processes. Apart from standard weighing mode, the WPY series additionally allows for parts counting, labelling and formula making processes. The universal software implemented in the terminal enables scales cooperation with barcode scanners, receipt printers, label printers, RFID scanners and PC peripherals (including mouse, keyboard and external data storage devices) all connectable to built-in interfaces RS232, USB and Ethernet. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. Design and functionality The WPY series features a stainless steel weighing platform and a terminal comprising both, 5,7” TFT colourful touch screen display and a membrane keyboard. The system is ready to connect an additional weighing platform, and provides below functions: programming of display and functional keys, programming of infrared proximity sensors, designing printouts, designing text data that is displayed on terminal display. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface. Software functionality: available working modes: weighing, parts counting, percent setup, formulation, density determination, animal weighing; generating standard labels for matching single goods; generating C labels for matching cumulative containers; generating CC labels for matching containers with cumulative containers; three means of triggering a C and CC label printout: - manually, - by counter status, - by set mass value of a product; control scales mode (+/- control of measurement result); product identification using EAN-13 and EAN-128 codes; access to databases of operators, products, raw materials, clients, weighing records, universal variables and tares. The multifunctional WPY series enables quick searching of a product by means of a connected barcode scanner. This option considerably increases functionality of the system. The terminal enables cooperation with a computer software "LABEL EDITOR", and the software communicates with the scales either through RS 232 interface or through ETHERNET. Scale WPY series is available in dual range (non-verified) version on surchage. Dual and single range scales in non-verified version are named as: scale model/NL, e.g. WPY 150/C2/R/NL.

Multifunctional scales TMX is designed to fast and precise determination of mass in industrial condi (more)tions. TMX Multifunctional scales TMX comprises terminal PUE 5 and a weighing platform. Labelling system series TMX is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

TOMY One Spin Mini Centrifuge New equipment in its original packaging Model/model number: One Spin - (more) mini laboratory centrifuge Maximum capacity: 1.5/2.0 ml microtubes x 4 Rotation speed: 4,000 rpm (±20%) *Fixed Centrifugal acceleration: 420-950 × g (1.5 ml) / 450-1000 × g (2.0 ml) Size/Weight: L105×D130×H96mm 0.38kg Single-phase power supply AC100-240V 50/60Hz 0.6A (dedicated power adapter)

This CTC Analytics Leap HTC PAL Autosampler HPLC was removed from a university lab where it was surp (more)lus to requirements. All units are in good cosmetic condition and powered up. We are unable to test the system further at our facility. Autosampler consists of:Autosampler main unit MXY 01-01BSerial No. 113399 Power supply unit MN01-00 Injector unit MZ01-00DSerial No. 980 Control key pad/screen MB 01-00A 2 x pumps MV 02-01ASerial Nos. 2961, 2963 Sample tray 3 drawer storage MP 02-00B Needle wash unitBottle shelf

A&D Weighing Gemini GR-120 Analytical Balance, 120 g, 0.1 mg Capacity 120 g Readability 0.1 mg  (more)Repeatability 0.1 mg Features - Splash/Dust Proof Membrane Keypad - Easy to clean antistatic breeze break, ABS housing, and SS pan, spill ring, dust plate & base floor - Stable die cast aluminum base with built-in internal weight that performs automatic self-calibration - Easy to see large .7in (17.8mm) LCD display with simple 6 button keypad interface - Super visible front mounted spirit level bubble helps reduce leveling time and increase accuracy - One touch Full Digital Calibration (internal & external) ensures balance is calibrated onsite for the best performance - Space saving footprint and collapsible doors maximize valuable bench space and reduce breeze break mishaps - Handy step card and door control lever opens either side of the weighing chamber for quick and efficient access - Easy-click door lock joints enable user to quickly configure doors to fit weighing work flows The A&D Weighing Gemini GR-120 Analytical Balance, 120 g, 0.1 mg, is crafted for precision and ease of use, equipped with advanced features tailored to meet the demands of diverse laboratory environments. Its splash and dust-proof membrane keypad, along with a robust die-cast aluminum base, provides durability and stability. The built-in internal calibration weight enables automatic self-calibration, ensuring consistent accuracy. A large 0.7-inch LCD display and straightforward six-button keypad interface make the balance easy to read and operate, while the front-mounted spirit level bubble helps users quickly achieve accurate leveling. With an anti-static breeze break and ABS housing, along with stainless steel components such as the pan, spill ring, and base floor, the Gemini GR-120 is designed for easy maintenance and long-lasting performance. The compact footprint and collapsible doors save valuable bench space and reduce accidental mishaps, while easy-click door lock joints allow users to adjust the chamber for convenient access and workflow efficiency. The Full Digital Calibration function supports both internal and external calibration, allowing quick, reliable calibration on site for peak performance. For data management, this model includes a memory function to store up to 200 weighing data records and complies with GLP/GMP/GCP/ISO output standards. Connectivity options include bi-directional RS-232C, and with the underhook for below-weighing applications, the Gemini GR-120 adapts to various tasks with precision. Supported by a 5-year warranty, this balance ensures reliable performance for your lab’s most critical measurements. INCLUDED: The A&D Weighing Gemini GR-120 Analytical Balance, 120 g, 0.1 mg includes: - Weighing Pan - Breeze Break Ring - Dust Plate - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

A&D Weighing Apollo GF-324A Analytical Balance, 320 g, 0.1 mg Capacity 320 g Readability 0.0001 (more) g Repeatability 0.0002 g (300 g); 0.0001 g (200 g) Features - Increased productivity via faster stabilization times including 1 second fast mode with Smart SHS - Impact-Alert visually & audible indicates the magnitudes of impact shocks - Shock-log documents date, time, and shock level - Flow rate display streamlines & improves filling or dosing precision - FR-Cal calculates, displays/outputs the mass or volume flow rate by entering density - FR-Compare is a comparator which provides feedback if the flow rate is within limits - FR-Secure stores tare values in our non-volatile memory if application was disrupted - External Calibration easy one touch button performs & document external calibration - Universal Flexi Coms (UFC) edit serial data output making label printing possible - Password-Protect offers password-protection up to 11 users and 1 administrator - Large, easy-to-see, front mounted spirit level with LED Illumination - Fly-thumbwheel is effortless & accessible allows ergonomic adjustment with anti-slip feet - Six straightforward keys – ON/OFF, CAL, MODE, SAMPLE, PRINT, REZERO to simplify operation across users - Weighing pan and dust plate can be easily removed for cleaning - Toggle between the Quick USB mode or Virtual COM mode (bi-directional) The A&D Weighing Apollo GF-324A Analytical Balance, 320 g, 0.1 mg, with a capacity of 320 g and a readability of 0.0001 g, delivers high precision in a robust package, ensuring accurate measurements for various laboratory applications. This balance features external calibration with an easy one-touch button that not only performs but also documents calibration, ensuring consistent performance and compliance with lab standards. Its fast stabilization time of approximately 2.0 seconds, or 1.0 seconds with fast mode enabled by Smart SHS® Weighing Technology, significantly enhances productivity, especially in fast-paced environments. Designed for versatility and user-friendliness, the GF-324A incorporates features like Impact-Alert, which visually and audibly indicates the magnitudes of impact shocks, and a Shock-log that documents the date, time, and level of shocks, protecting the integrity of your results. Additional advanced functionalities include a Flow Rate Display (FRD) that streamlines and improves the precision of filling or dosing tasks. The FR-Cal function calculates and displays outputs for the mass or volume flow rate by entering density, while FR-Compare provides feedback if the flow rate is within set limits. FR-Secure ensures that tare values are stored in non-volatile memory to prevent data loss during disruptions. Operational simplicity is achieved through its user-friendly interface featuring six straightforward keys—ON/OFF, CAL, MODE, SAMPLE, PRINT, REZERO—and a large, front-mounted spirit level with LED illumination for easy leveling. The balance's flexible communication capabilities, including RS-232C and USB interfaces, support seamless data management. All these features are housed in a design that allows for easy cleaning and maintenance of the weighing pan and dust plate. The A&D Weighing Apollo GF-324A Analytical Balance is backed by a 5-year warranty, assuring long-term reliability and support. INCLUDED: The A&D Weighing Apollo GF-324A Analytical Balance, 320 g, 0.1 mg includes: - External Key Jack - Large Glass Breeze Break - Breeze Break Ring - Weighing Pan - Bubble Spirit Level - USB Cable - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Heidolph 036110220 Hei-PLATE Mix 20L Magnetic Stirrer The Heidolph 036110220 Hei-PLATE Mix 20L Magne (more)tic Stirrer was specially developed for applications with thermolabile substances. Because this model has no heating. The Hei-PLATE Mix 20L is ideal for applications up to 20 liters and can gently stir your solution in a speed range of 100 to 1,400 RPM. In addition, the rotation speed ramps up slowly until it has reached the desired value. This prevents splashes, uneven starts, or jumps of the stirring rod. The patented Kera-Disk® plate made of aluminum with a ceramic coating is chemical-resistant, scratch-resistant and has a diameter of 145 mm. This unique size makes it suitable for use with many accessories and samples on a small footprint. This unit does not have a heating function Click Here to View Product Video INCLUDED: The Heidolph 036110220 Hei-PLATE Mix 20L Magnetic Stirrer includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 10 Year Manufacturer's Warranty