Radwag H315.60.HR3.M Waterproof Scale With Stainless Steel Load Cell

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

Ramp scales with stainless steel load cells is widely applied in meat, fish, pharmaceutical, cosmeti (more)c and chemical industry. The H315/4N series is manufactured in complete stainless steel technology with stainless steel indicator PUE H315 series installed on a long cable. Ramp scales is manufactured from OH18N9 stainless steel with IP 68. On special order, it is possible to manufacture ramp scales in upgraded anti-corrosion stainless steel version. Scales is available in dual range version on surcharge.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

The HX7.4 C scale is a solution based on a stainless steel PUE HX7 terminal (AISI 304) and a powder  (more)coated 4-load-cell platform. The terminal The terminal is characteristic for a 7” colour graphic display. Its novelty is a red-green 9-diode bar graph presenting the current net mass in reference to the scale range or preset min and max thresholds. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Databases Terminal’s system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing.

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.

Water bath from 25°C to 100°C for the laboratory The water baths of the LAUDA Hydro series are the i (more)deal tools for any laboratory application, whether biological, medical or biochemical and guarantee a homogeneous temperature distribution without overheating problems. High quality stainless steel and thoughtful design, provide the ideal depth and opening for any application with bathroom volumes from 4 to 41 liters. All water baths offer a temperature range up to 100°C, with a temperature stability of ±0.1K, so that applications even in the boiling range are possible. A TFT color display ensures intuitive operation with temperature display in °C and °F. Application examples - Preparation of cellular, biological or medical samples - Microbiological test incubation - Thawing of the samples - Conducting chemical reactions Notable features - Three timer functions for the user - Electric resistance inside the tank - Direct temperature control for fast and precise heating - Visual and acoustic alarm in case of lack of water, low / high temperature and sensor break - Digital and electromechanical safety system - Lid designed to prevent condensation from dripping onto samples - Exhaust valve on all models Standard equipment - Lid and drain tap in heat-insulating double-walled stainless steel Accessories available Water level regulator. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Dump valve on all Hydro Lauda models. Simple control panel with large TFT display with extensive information; change settings and navigate quickly and easily. Optical and acoustic alarm for low water level and over/under temperature as well as sensor breakage/short circuit. Optimized space, safety and comfort of use. Connection for water level regulator (available as accessory). Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Beckman Coulter Biomek FXp Laboratory Automation Workstation w/ PC and Software This item was remove (more)d from a university lab where it was surplus to requirements. The system powered on with stable status lights. The previous client stated it was in working order when last used on: 24.05.24. The system comprises: - Beckman Coulter FX Device Controller - Cat No.: 719366 - 3 x Inheco Single TEC Control - Part Nos.: 8900031 - Serial Nos.: 2549, 2564, 2537 - Inheco Thermoshake Plate Shaker & Cooler/Heater - Part No.: 7100146-B - Serial No.: 3080 - Year: 2018 - Thermo Scientific Masterflex P/S Easy-Load ll Pump - Model: 1400-1320 - Serial No.: B13001697 - Pump heads model: 956-0025 - Lenovo ThinkCentre M83 with Windows 7 PRO - Model: S11DOO - Serial No.: MJ03JHRD - Lenovo ThinkVision Monitor - Serial No.: V6-D1101 - Year: 2010 - Lenovo Keyboard and Mouse Software and Manuals Included:- Beckman Coulter install disks - Masterflex P/S 1400 series operating manual - Biomek Tutorials and setup guides Also Included:- Various adapters, injector pump plungers, nozzle sets, plastic bottles, holding plates, etc. Specifications:- Model: FXp Workstation - Serial No.: A318440537

This BIO RAD Bio-Plex System, Luminex XYP & Luminex 100 Multiplex was removed from a university  (more)lab where it was surplus to requirements. The system powers on and is in a reasonably good cosmetic condition, we're unable to test it further at our facility. System includes: BIO RAD Luminex XYPModel: Luminex XYPSerial#: LXY05066104 BIO RAD Luminex 100Model: Luminex 100Serial#: LX1000503501

With use of IM01.EX communication module it is possible to expand communication interfaces range of  (more)the HX5.EX indicator. The module is installed outside the hazardous area, and connected to the indicator using intrinsically safe interface. IM01.EX allows to establish communication between the scale and various accessories, e.g. barcode scanners, printers, displays, control buttons, light signalling towers, buzzers and other controlling/signalling devices. It also enables connection with systems of automatic adjustment and control of industrial processes, and with superior IT systems. IM01.EX-3 interfaces: 2 x RS232, USB, Ethernet, 12 IN, 12 OUT (digital). It is possible to configure module interface quantity following the Interface Configuration Table that is to be found in product data sheet.

Manufacturer: Hiden Isochema Model: IGAsorp Dynamic Vapor Sorption Analyzer S/N: IG-SA-069 Descripti (more)on: IGAsorp Dynamic Vapor Sorption Analyzer is a fully automated compact benchtop DVS analyzer, for fast and accurate sorption measurements using the dynamic flow technique for water and organic solvents. Measured vapor uptake isotherms and kinetics are used to characterize, test and evaluate materials in precisely defined environmental conditions. An ultra-sensitive microbalance measures changes in sample mass as a function of humidity and temperature. Humidity is determined by relative mixing of wet and dry gas streams, and is measured and regulated at the sample position. These factors combine to offer unrivalled performance and total baseline stability. The IGAsorp uses the unique IGA method for the determination of the sorption kinetics and equilibrium isotherms. This ensures accurate and consistent analysis with faster analysis times making the optimum use of instrument time. Hiden Isochema’s unique IGA method is applied independently to every step in a gravimetric sorption measurement. At each step, the humidity and temperature are actively regulated, with resultant changes in sample weight continuously recorded. The kinetic weight data is analyzed in real-time, and the trend toward equilibrium is predicted and displayed on screen. Equilibration criteria are applied to objectively determine the period allowed before the measurement moves on to the next pressure or temperature value. Each equilibrium point is plotted on an isotherm or isohume, and the full raw data is also recorded. The IGAsorp therefore allows consistent analysis with optimum measurement accuracy and faster overall process times. Benefits and features: - Unrivalled performance and total baseline stability- Fast and accurate analysis of equilibria and kinetics using the IGA method- Market-leading weight stability, temperature and humidity control- Unrivalled measurement precision, accuracy and resolution- Operation with water and organic vapors- Built-in user conformance tests for weight, temperature and humidity verification- High security 21 CFR Part 11 compliant software option with 3 user privilege levels- Advanced analysis features including diffusion coefficients, permeation rates and more Types of measurements that can be recorded: - Isotherm and kinetics analysis- Cyclic/lifetime studies- Moisture content determination- Hydrate analysis- Permeation and diffusion studies (MVTR)- Amorphous phase detection Types of materials that can be tested: - Polymers- Textiles- Pharmaceuticals- Porous materials- Packaging materials- Building and construction materials- Food products and other consumables- Wood, fibres, clays and other natural materials Key areas: - Pharmaceutical- Biotech- Polymers and packaging- Natural materials- Building and construction materials (cement, timber, insulation, adhesives)- Electronics- Fuel cells (proton exchange membranes) DVS applications: - Quality control- Hydrophobicity, product stability and shelf life- Water activity and water content determination- Polymorphism: amorphous phase detection and quantification- Diffusion and permeation including vapor transmission rate (MVTR/WVTR) analysis Application data: - Amorphous phase detection:A simple test to detect amorphous phase transition- Permeation study:MVTR results from a polmer film- Kinetics analysis:Example of an isothermal kinetic response data- Isotherm analysis:Comparison between isotherms at course and medium resolution- Hydrate analysis:Example of a hydration-dehydration cycle- Diffusion study:Variation of the microscopic diffusion coefficient with relative humidity Specifications: Weight:- Capacity: 5 gram- Weighing range: 25 / 200 / 1000 mg (fixed) or user selectable (optional)- Resolution: from 0.05 microgram- Stability: nominal +/- 1 microgram / weekHumidity:- Control range: 0 to 98 %RH- Absolute Calibration Accuracy: +/-1 % (0-90 %); +/-2 % (90-100 %)- Regulation accuracy: +/- 0.01 %RH- Minimum control increment: 0.02 %RH- Gas Supply: Dry air, N2 or He- Maximum flow rate: 500 ml/minTemperature:- Measurement range: 5 – 50 °C- Regulation accuracy: +/- 0.01 °CPower requirements: 240V 50Hz Items delivered: - Hiden Isochema IGAsorp Dynamic Vapor Sorption Analyzer- Connecting Cable Condition: The item is in very good condition - cosmetic, technical and working. It operates as intended and functions properly being 100% functional tested. The Hiden Isochema IGAsorp Dynamic Vapor Sorption Analyzer is ready to use!