Radwag H315.60.H5.K Waterproof Scale

Measurement with application of 4 load cells is a guarantee of precise mass reading, regardless of l (more)oad positioning on weighing platform. H315.4 H/Z The platform scales H315.4 H/Z series is fully made of stainless steel profiles with stainless steel weighing platform. The scale features 4 load cells, and it is prepared for mounting as a pit version. The device comes standard with opening weighing platform enabling easy cleaning the area beneath the platform. The H315.4 H/Z series features a stainless steel terminal PUE H315 series with backlit LCD display and function buttons. The terminal is installed on a long cable for easy mounting it on a wall. The scale is powered from mains, RS 232 interface comes standard. Scales is available in dual range version on surcharge. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

Stainless steel platform scale with four sensors No matter where you place the load on the platform, (more) the result will always be correct. This is due to the four sensors built into the platform. You will appreciate this especially when weighing an irregularly shaped object. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale works anyway (up to 7 hours). Power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! Work as you like The PUE H315 terminal sits on a 3-meter cable that allows you to hang the terminal on the wall. This allows you to arrange your weighing workplace in many ways. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The membrane keyboard is another argument in the discussion of the water resistance of this scale. If you need a dual-range scale, we can make one for you at an extra cost.

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don’t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

HX7 HR scale’s multi functions The HX7 HR scale is a device comprised of AISI 304 (IP66 / IP68 (more)) stainless steel terminal the PUE HX7, and AISI 316 (IP 68 / 69K) stainless steel weighing platform. The HX7 HR has been designed to operate in challenging conditions, even in places where the platform is exposed to acids. Display The 7” colour graphic display and the diode bar graph, which signals current net weight of a load in reference to the scale range or declared min, max thresholds, boost comfort especially in case of piecework where fast and precise presentation of product mass deviation is required with regard to the limit values. Hermetic communication interfaces Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the terminal at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Software The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Terminal’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

CryoBox Freezer Rack THERMO SCIENTIFIC 5038-4322 Brand new in original packaging For standard cryoge (more)nic boxes with ease with these durable stainless steel and aluminum freezer racks, which fit most standard chest freezers and upright freezers Part number: 5038-4322 For 12 standard Cryoboxes 12-place rack (4X3) Type: horizontal Dimensions: 22.5 x 44.4 x 14.3 cm (lxWxH)

Interfurn 4 Drawer Cabinet L. Blue 600x600x490

MARSHALL Select MS-PA20UL Autoclavable Pipette, 2-20ul Volume Range 2 to 20ul Increment 0.5ul Pipett (more)e Type Manual Air Displacement Features - Adjustable from 2 to 20 µl for versatile small to medium sample processing - Offers 0.5 µl increments for precise volume adjustments in detailed experiments - Ensures accurate measurements with an accuracy of ±0.9/1.20/3.00% for critical applications - Provides consistent results with a precision of ±0.4/1.00/2.00% to enhance experiment reproducibility - Serializable at 121°C without special preparation, maintaining sterility and performance - Low-force design reduces fatigue and minimizes risk of repetitive strain injuries - Easy to maintain for long-term reliable performance in the lab The MARSHALL Select MS-PA20UL Autoclavable Pipette is a highly precise and ergonomic tool designed for various laboratory applications requiring accurate liquid handling. With a volume range of 2 to 20 µl and a fine 0.5 µl increment, this pipette offers exceptional accuracy of ±0.9/1.20/3.00% and precision of ±0.4/1.00/2.00%, making it ideal for delicate and small-volume tasks. Its lightweight design and low-force mechanism reduce the risk of repetitive strain injuries, ensuring user comfort during prolonged use. The centrally located digital display enhances ambidextrous usability, making it easy for both left- and right-handed users to view volume settings. A rotating counter knob allows for quick volume adjustments, while a quick-release pipette tip ejector facilitates convenient tip changes. Constructed from innovative materials, the MS-PA20UL is easy to calibrate and maintain, ensuring reliable performance over time. This pipette is fully autoclavable at 121°C, allowing for thorough sterilization without the need for special preparation. After autoclaving, it can be cooled and dried over 12 hours, ready for immediate use. The design helps avoid repetitive strain injuries and includes a volume lock to prevent accidental adjustments. It is compatible with universal pipette tips and suitable for both forward and reverse pipetting techniques, offering versatility for handling low-viscosity liquids and more challenging higher-viscosity or foamy samples. As part of a comprehensive range covering volumes from 0.1 µl to 10 ml, the MS-PA20UL provides flexibility across different applications. With robust construction and user-friendly features, this pipette is an indispensable tool for laboratories seeking precision and reliability in liquid handling, meeting rigorous standards including ISO 9001:2008 and ISO 13485:2003 certifications, along with CE marking. INCLUDED: The MARSHALL Select MS-PA20UL Autoclavable Pipette, 2-20ul includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA T25 Digital ULTRA-TURRAX Disperser Speed Range 3,000 to 25,000 RPM Viscosity Max. 5,000 mPas Sti (more)rring Quantity Max. 2 l Features - Digital speed display - Electronic speed control - Electronic overload protection - Stainless steel dispersing elements can be cleaned quickly and easily - Plastic disposable dispersing elements are available in two sizes - Error code display - Quiet operation The high-performance dispersing instrument for volumes from 1 – 2000 ml (H2O) features a digital speed display. It offers a wide speed range from 3000 – 25,000 rpm, enabling users to work at high circumferential speeds even with small rotor diameters. A broad choice of dispersing elements adds versatility, making it suitable for applications ranging from homogenizing wastewater samples, use in laboratory reactors, dispersion tasks under vacuum/pressure, and sample preparation in medical research. The instrument boasts a motor rating input of 800 W and an output of 500 W. It includes electronic speed control and overload protection, ensuring reliable performance. Additionally, it operates quietly and features an error code display for easy troubleshooting. The dispersing tool is not included in the scope of delivery.