Radwag H315.4.300.H7 Stainless Steel Platform Scale

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

HX7 H scale’s multi functions Many functions, many interfaces and great robustness (IP66/ IP68 (more)) mean many possibilities for you to use this advanced scale. Tomorrow you can apply it to a different process than today – that’s the multifunctionality. That’s the saving! Use the potential Barcode scanners, receipt printers, label printers, external displays, control buttons, light signalling towers and other controlling/ signalling devices – thanks to multipurpose software, HX7 scale can work with all of them. You can easily connect them thanks to the fact that the balance is equipped with interfaces: RS232, RS485, USB, Ethernet, 4 IN/ 4 OUT. Optionally, the balance can be equipped with 12 IN/ 12 OUT and analog output module. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Easy and pleasant Simple and convenient operation with a 7-inch color display. Perfectly visible messages additionally supported by bargraph. The top part of the operation panel features a bar graph consisting of 9 red and green diode fields. The bar graph is a graphic visualisation informing the user on a current net weight of a product presented with reference to the scale range or declared min and max thresholds. The bracket allows the terminal to be placed on any flat horizontal surface or screwed to the wall with adjustable angle. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The construction of the scale is made of a stainless steel. This guarantees you work for many years. Not just weighing But also parts counting, dosing, percent weighing and formulations. The power of HX7’s working mods. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Referring to stored weighings you can generate weighing reports, formulation reports and reports on performed control processes. Single weighing is stored in the ALIBI memory as long as it is specified by a Weighing Storage Period (days) parameter.

If you buy a WPY Multifunctional Scale by July 31, 2024, you will receive each of these products alo (more)ng with a FREE lifetime license for the Workflow Module. Multifunctional scales WPY series is designed for fast and precise determining mass of weighed objects in industrial conditions and with application of a modern terminal PUE7 series. Application The device features simple structure and enables maximum automation of carried out weighing processes. Apart from standard weighing mode, the WPY series additionally allows for parts counting, labelling and formula making processes. The universal software implemented in the terminal enables scales cooperation with barcode scanners, receipt printers, label printers, RFID scanners and PC peripherals (including mouse, keyboard and external data storage devices) all connectable to built-in interfaces RS232, USB and Ethernet. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. Design and functionality The WPY series features a stainless steel weighing platform and a terminal comprising both, 5,7” TFT colourful touch screen display and a membrane keyboard. The system is ready to connect an additional weighing platform, and provides below functions: programming of display and functional keys, programming of infrared proximity sensors, designing printouts, designing text data that is displayed on terminal display. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface. Software functionality: available working modes: weighing, parts counting, percent setup, formulation, density determination, animal weighing; generating standard labels for matching single goods; generating C labels for matching cumulative containers; generating CC labels for matching containers with cumulative containers; three means of triggering a C and CC label printout: - manually, - by counter status, - by set mass value of a product; control scales mode (+/- control of measurement result); product identification using EAN-13 and EAN-128 codes; access to databases of operators, products, raw materials, clients, weighing records, universal variables and tares. The multifunctional WPY series enables quick searching of a product by means of a connected barcode scanner. This option considerably increases functionality of the system. The terminal enables cooperation with a computer software "LABEL EDITOR", and the software communicates with the scales either through RS 232 interface or through ETHERNET. Scale WPY series is available in dual range (non-verified) version on surchage. Dual and single range scales in non-verified version are named as: scale model/NL, e.g. WPY 150/C2/R/NL.

Ohaus Scout STX2201 portable scale, with plate 170x140mm These balances are ideal for laboratory and (more) industrial applications. They feature an easy-to-navigate color touchscreen display and a compact design that allows for storage. They offer excellent performance with fast stabilization times and high resolution results. They are also equipped with excellent overload protection and advanced connection options. Applications Weighing, Piece Counting, Percent Weighing, Check Weighing, Dynamic / Animal Weighing, Totalization, Density Determination, Display Hold, Molar Weighing Display 4.3'' (109 mm) touchscreen display with VGA color graphics resolution and user-controllable brightness Operation Power supply (adapter supplied) or batteries (not supplied) with low battery indicator and programmable automatic shutdown Communication RS232, USB host, USB device, Ethernet or Bluetooth® (available as accessories) Structure ABS housing, stainless steel deck, ABS draft shield (1 mg models only), weigh below hook, transport lock, manual calibration lock switch, safety slot, stabilizing feet, level indicator front illuminated Construction features Stability indicator, stackable design with storage cover included (except 1mg models), mechanical and software protection against overload and underload, battery life indicator, automatic shutdown, automatic tare, calibration mass provided on models with capacity higher than 620 gr. Integrated applications: - Weighing: determines the weight of the objects on the pan in the selected unit of measurement. - Piece Counting: Counts the number of pieces on the pan using a uniform weight. - Percent Weighing: Measures the weight of a sample displayed as a percentage of a preset weight reference. - Weight check: compares the weight of a sample with respect to the target limits. - Dynamic Weighing: Weighs an unstable sample load. The scale takes an average of weights over a period of time. - Totalization: measures the cumulative weight of multiple objects. The cumulative total can exceed the capacity of the balance. - Density determination: determines the density of solids or liquids. With the integrated weigh below hook, specific gravity tests can be performed for objects that cannot be easily placed on the weighing pan. - Display Hold: Manually holds the last stable weight or the first highest stable weight value on the display. - Mole Weighing: Measures the weight of a sample and  calculate it into Moles automatically New generation of Ohaus portable scales These balances are ideal for laboratory and industrial applications. They feature an easy to navigate color touchscreen display and a compact design that allows for storage. They offer excellent performance with fast stabilization times and high resolution results. They also feature excellent overload protection and advanced connection options. - Fast and efficient navigation thanks to the color touchscreen display - High weighing speed and high resolution display of repeatable and reliable results - Excellent overload protection - Different application modes and operation in various languages ​​for simplified weighing The OHAUS Scout scale can be equipped with various connectivity options: RS232, USB, USB device, Ethernet or Bluetooth®. These options guarantee a modern and smart experience, increase the versatility of data collection and transfer functions. Other standard features and equipment Transport lock, stainless steel weighing pan, menu and setting lock switch, adjustable and non-slip feet, bubble level, software and mechanical overload/underload protection, stability indicator, automatic tare, level indicator low battery, auto power off, user selectable print options and communication settings. Applications Weighing: Determines the weight of the items on the pan in the selected unit of measure. Piece Counting: Count the number of pieces on the pan using a uniform weight. Percent Weighing: Measures the weight of a sample displayed as a percentage of a pre-set reference weight. Check Weighing: Compares the weight of a sample against target limits. Dynamic Weighing: Weigh an unstable sample load. The balance takes an average of weights over a period of time. Totalization: Measures the cumulative weight of multiple items. Cumulative total may exceed balance capacity. Density Determination: Determines the density of solids or liquids. With the integrated weigh below hook, specific gravity tests can be performed for items that cannot easily be placed on the weighing pan. Display Hold: Manually holds the last stable weight or the first highest stable weight value on the display. Mole Weighing: Measures the weight of a sample and automatically calculates it into the mole. MODELS AVAILABLE: Applications Weighing, Parts Counting, Percent Weighing, Check Weighing, Animal/Dynamic Weighing, Totalization, Density Determination, Display Hold, Molar Weighing Display 4.3' (109mm) touchscreen display with color VGA graphics resolution and user controllable brightness Operation Power supply (adapter supplied) or batteries (not supplied) with low battery level indicator and programmable automatic shutdown Communication RS232, USB host, USB device, Ethernet or Bluetooth® (available as accessories) Framework ABS housing, stainless steel pan, ABS draft shield (1 mg models only), weigh below hook, transport lock, manual calibration lock switch, security slot, stabilizing feet, level indicator illuminated front Construction features Stability indicator, stackable design with included storage cover (except 1mg models), mechanical and software overload and underload protection, battery life indicator, auto power off, auto tare, calibration weight provided in models with capacity greater than 620 gr. THE TOUCHSCREEN DISPLAY Using portable scales has never been easier! The color touchscreen display allows you to explore the interface and icon menu, open and close application modes, change units of measure with a single touch of the screen. In seconds, an unmatched level of portable weighing efficiency and functionality. In addition, GLP/GMP traceability makes it easier to monitor and report data.

Sequenom Agena MassARRAY Analyzer 4 System RS1000, PHX-1 & Accessories This was removed from a  (more)university lab where it was surplus to requirements. The system powers up and everything communicates but we were unable to test it further at our facility. The touchscreen on the nanodispense does not work, but we have replaced it with a monitor, mouse and keyboard. There is also a complete peripheral setup provided for the inbuilt PC in the PHX-1 system. Included in the system are; Sequenom Agena MassARRAY Analyzer 4 PHX-1Model: PHX-1Serial#: PX10060104 Sequenom Agena MassARRAY Nanodispenser RS1000Model: RS1000Serial#: 10P0413RS-01 The system also includes the following: Windows XP Software DiscNI Vision Deployment Engine for One UserMassARRAY Nanodispenser RS-1000 User's Guide v1.2.1WebPAM Software DiscFastTrak TX2300/TX4300 Quick Start GuideVarious Replacement parts (shown at end of slide)Various Plates for plate reader.

IKA Pette multi 8 x 0.5 - 10 µlLies comfortably in your hand with uncompromising precise performance (more): IKA introduces the IKA PETTE multi, a series of mechanical air-displacement pipettes available with either 8 or 12 channels for precise dispensing in microtiter or deep well plates. In total, there are six different models available with different adjustable volume ranges from 0.5 to 200 μl. This brings IKA's pipette portfolio to a total of 24 models: ten single-channel pipettes with fixed volumes (PETTE fix), eight with variable volumes (PETTE vario), and six models of the PETTE multi. The IKA PETTE series are used for many different applications in the modern laboratory. Color-coding simplifies rapid selection of the right pipette. The impact-resistant, UV-resistant and chemically resistant conical tip ensures reliable metering in the long-term. Improved ergonomics as a result of replaceable handles IKA pipettes include three interchangeable handles in various different shapes and materials in the delivery. The choice of the right handle for your particular hand means that the pipette can be adapted to suit your individual requirements. This ergonomic optimization permits comfortable and wrist-friendly working, and ensures that the pipette sits in your hand perfectly in daily use for easy grasping of the working points. Precise and repeatable results are thus guaranteed. Comfortable and rapid adjustment of the pipetting volume The pipetting volume is adjusted in two stages (fine and coarse). Locking and unlocking of the volume is also carried out in the same way as fine adjustment by one hand using the multifunction button. The set volume can be read off the display in large figures at any time, process-safe and clearly Straightforward ejection of the tip of the pipette After the pipetting process, the tip of the pipette is ejected quickly and without time-consuming hand repositioning simply by pressing the central multifunction button. The round design means that the single-handed ejection works equally for both right-handed and left-handed users. Robust and smooth The piston and tip cone are made from DLC-coated stainless steel. DLC stands for diamond like carbon and is a diamond-like type of carbon which exhibits high levels of wear and corrosion resistance, together with particular hardness and low frictional indices. The DLC coating means that the tip cone is particularly insensitive and also ensures that the tips of the pipettes are always in perfect condition and are securely seated, without leaks. The extremely good anti-friction properties of the DLC also mean that the pipette will only need to be re-greased on rare occasions. The benefit of the coating for the user is primarily the consistent and low level of force required when absorbing and discharging the liquid to be pipetted. Maintenance-friendly, process-secure and easy to clean Regular cleaning and maintenance of the pipette guarantees a long service life for the product. The volume unit with piston and seal can be replaced completely in just a few hand movements. The equally simple assembly is acknowledged audibly by a click and is thus process-secure. Adjusting safely and without the need for tools If you detect deviations in the framework of calibration, the pipette will generally need to be adjusted. Tools are not needed for adjusting the IKA PETTE. The user thus saves valuable time in looking for the right tool. The pipette is subsequently secured against inadvertent adjustment. Simplified acquisition, documentation and monitoring Acquisition, documentation and monitoring of equipment and processes is of great importance in most laboratories. The serial number of the IKA PETTE can be scanned from a QR Code on the housing, easily and without transfer errors. The serial number and the pipette are thus uniquely linked. Can be autoclaved at 121°C The IKA PETTE is ideally suited to heat and high-pressure sterilization. Thanks to its simple construction, the pipette can be cleaned and autoclaved either in complete or in dismantled state. Large range of pipette tips All IKA PETTE models are compatible with pipette tips from most manufacturers. Pipette tips having the standard color codes gray, yellow, and blue always fit on our pipettes, marked accordingly. This means that there is a wide range of pipette tips to choose from and you can rest assured that only suitable tips are fitted.INCLUDED: The IKA Pette multi 8 x 10 - 100 µl includes: - Two Year Manufacturer's Warranty

Labconco FreeZone Bulk Tray Dryer 115V,50/60Hz FreeZone Bulk Tray Dryers lyophilize moderate to larg (more)e bulksample loads or numerous small batches of vials or serum bottles. The Bulk TrayDryers have three large, 12.7” x 16.6” shelves that heat up to +60C. Optionsinclude a 6-port manifold, isolation valve, additional heated shelves andsample trays. Lyo-Works™ OS lets the user set up to 30 programs, with up to 16steps each; record, chart and store data; and receive email alerts. The traydryer connects to a FreeZone Console Freeze Dryer that provides a real timedisplay of the tray dryer’s parameters on a large capacitive touch screen. Features Chamber may accommodate two additional shelves (sold separately). 200-watt heater on each shelf for heating to +60C (+140F). A microprocessor maintains system temperature within 3C of set point. (Shelves are not cooled by the Bulk Tray Dryer. Samples must be pre-frozen.) Three sensor probes for monitoring sample temperature. Connections for two additional sensors are provided (additional sensors sold separately). System programming that is displayed on the FreeZone 6, 12 or 18 Liter Freeze Dryer (freeze dryer sold separately): Manual or Program mode; probe temperatures in C or F, vacuum in mBar, Pa or Torr; segment of the program that is in progress; time remaining in present segment; alarms for power failure; shelf temperature variation >±3C; failure to reach shelf set point temperature ±3C; and program completed. Data logging and storage, when enabled, that stores and displays data in table or chart on the FreeZone 6, 12 or 18 Liter Freeze Dryer (freeze dryer sold separately). Data logging may be exported via USB or Ethernet from the FreeZone Freeze Dryer. Vacuum release valve with knob for venting the chamber so the chamber door may be opened. Side-mounted power switch. Integral support stand with attachment port for connection to FreeZone 6, 12 or 18 Liter Console Freeze INCLUDED: The Labconco 780601000 FreeZone Bulk Tray Dryer 115V,50/60Hz includes: - Communication Cable - Hardware (Screws x 4, Nuts x 4, Washers x 8) - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Perkin Elmer AAnalyst 600 Atomic Absorption Spectrometer Untested equipment Without a computer Witho (more)ut software

Speed: 100 to 14680 rpm (50 rpm increments) RCF: 1 to 20238 x g (50 x g increments) Run time: 30s to (more) 9:59 h, infinitely (0.5 min increments up to 10 min, thereafter in 1 min increments) Dimensions (WxDxH): 236 x 320 x 227 mm Weight: 13.4 kg Equipped with: 1x Eppendorf FA-45-24-11 biocontainment lid 1x Eppendorf FA-45-24-11 fixed angle rotor (max 15000 rpm; 24x 1.5 mL/2.0 mL micro test tube capacity)