Radwag H315.15.H3.K Waterproof Scale

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don’t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded (more) 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP66 / IP68, makes it suitable for use in industry. HX7.4 H/Z Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. The terminal's system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.

If you buy a Multifunctional Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Multifunctional scales HY10 series is designed to fast and precise determination of mass in industrial conditions. The HY10 scales features a terminal PUE HY10 series in stainless steel housing and a single load cell weighing platform. The HY10 series scales is made of stainless steel OH18N9 including the weighing platform, and it is equipped with 10,1”colourful touch screen display, keyboard with numeric and function keys. The scales enables cooperation with an additional weighing platforms. Additionally, the HY10 series offers full functionality available in the terminal PUE HY10 series: programmable display and function keys, designing custom printout templates, designing text data indicated on terminal display. Multifunctional scales HY10 series is offered with a terminal connected to a weighing platform through a cable. Scales HY10 series is available in dual range version on surcharge. Dedicated Applications Smart Editor The application is intended for scales equipped with the HY10 terminal. It does not require any additional installations. Enter the terminal’s address in the browser address field and log in. The application enables: - remote databases editing - import of images from the graphic file to the scale - labels import from lb file to the scale - creating and preview of report, e.g. Workflow - dosing processes operation Smart Display The application allows to personalise the scale screen and display it on a computer. The Smart Display enables customization of the display screen in a simple and clear way. Place the individual elements on a grid visible on the screen. These elements can be further scaled to suit user needs. When operated directly on the scale, the user gets a new, refreshed look with the possibility of any configuration of the home screen. If the application is operated via a computer browser, it enables remote control of the desktop or setting larger mass indication window. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface.

Multifunctional scales TMX is designed to fast and precise determination of mass in industrial condi (more)tions. TMX Multifunctional scales TMX comprises terminal PUE 5 and a weighing platform. Labelling system series TMX is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Heidolph Incubator 1000 High Hood XL With a height of 428 mm, this cap is particularly suitable for  (more)tall culture vessels, such as 2,000 ml Erlenmeyer flasks. Suitable for the 1000-series models of the platform shakers Duomax 1030, Polymax 1040, Titramax 1000, Unimax 1010, and Promax 1020.INCLUDED: The Heidolph Incubator 1000 High Hood XL includes: - Three Year Manufacturer's Warranty

Scilogex 1.5/2ml x 24 Aluminum Alloy Rotor with CoverThe Scilogex Aluminum Alloy Rotor with cover ha (more)s the capacity to accomodate 24 x 1.5/2mL tubes and can a reach maximum speed of 15,000RPM. For use with the D3024 & D3024R centrifuges. INCLUDED: The Scilogex 1.5/2ml x 24 Aluminum Alloy Rotor with Cover includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

PELTIER LABORATORY INCUBATORS ILP SMART POL-EKO ILP - REFRIGERATION WITH PELTIER TECHNOLOGY ILP incu (more)bators are innovative and ecological instruments, which use the Peltier system to cool the internal chamber. They maintain a constant temperature from 0°C to 70°C, being able to drop to a maximum of 20°C below the ambient temperature. Cooling with Peltier technology gives these instruments multiple advantages: they are silent, vibration-free, precise and ecological. And then: large touch display, programming, alarms, lock, stainless steel interior and much more. Continue reading and discover all the other amazing features of these incubators! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ILP SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Double door: solid external; glass interior - Interior in acid-resistant stainless steel according to DIN 1.4301 - Insulated door with lock - Protection class 2.0 - Protection class 3.3 (DIN 12880) as option - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor PELTIER TECHNOLOGY: SIMPLE AND RELIABLE The Peltier cell refrigeration system is a modern technology used in various refrigeration or heating instruments, thanks to its innate versatility. The strengths of Peltier technology are the scalability of the cooling elements, the possibility of operating anywhere, its reliability and precise power control. Furthermore, the Peltier elements work without moving parts and therefore without vibrations or noise. One of the main advantages compared to traditional compressors is that no flammable or environmentally harmful refrigerants are used and in general, the whole system is much simpler, avoiding breakdowns. To find out more, we recommend the Wikipedia page Thermoelectric cooler. In particular, for incubation, Peltier cells bring several advantages: Zero vibration - Through the use of Peltier cells, the vibrations previously generated by the compressor are eliminated. Minimal fluctuation and variation: excellent fluctuation, variation and short time to reach the set temperature. Lighter design with more space: Peltier cooling system reduces the overall size of the instrument and its weight. Ecological: Peltier technology is simple and does not use substances harmful to the environment. Below are simple operating diagrams of the ILP incubators during cooling and heating. ILP SMART SERIES The ILP series with Peltier cooling offers you four models, from 56 to 749 liters of internal volume. The models are available with two different external finishes: in light gray powder-coated sheet metal with a graphite top panel or completely in stainless steel, with a linen-like texture. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Access port for external sensor 3 - Temperature sensor 4 - Internal glass door 5 - Adjustable feet 6 - Stainless steel shelf 7 - Solid external door 8 - Peltier module fans 9 - Door open sensor 10 - Touch screen control panel 11 - USB port 1 - Main switch 2 - Spacer 3 - External fans of the Peltier module 4 - LAN port 5 - Fuse 6 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Door with viewing window - Stainless steel shelf - Perforated shelf - Stainless steel basins - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.1 according to DIN 12880 - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20mm access door - Additional 30 mm access door

The RMC 2.5Y.F filter robot is a professional-class measuring device ensuring full automation of fil (more)ter mass measurement. The robot is based on MYA 5Y microbalance mechanism that guarantees unrivalled repeatability and readability of d= 1 µg. The device enables weighing up to 156 filters. The device is enclosed in a tight and dustproof chamber protecting it against any contamination. Ambient conditions monitoring allows control of current chamber status and report of data. Advantages: Compliance with EN 12341:2014 standard Less time consuming when compared to manual filter weighing Elimination of human factor as the reason of measurement errors Process management using RMCS Filter software Automatic data recording, creating reports and statistics Coding and identification of filters using QR code system Elimination of the influence of electrostatics onto the measurement The RMC 2.5Y.F filter robot comprises: a six-position reference magazine for storing mass standards and reference filters; a robot with a gripper enabling transport of the filters between the magazine and the microbalance, the robot moves on three axes: X,Y,Z; a microbalance with a draft shield; an ionizing system; ambient conditions monitoring (temperature, humidity, pressure); a weighing indicator for managing of the device operation; an integrated QR code reader; a QR code printer; a PC with the RMCS Filter software for managing the device operation.

Agilent 1200 G1323B Handheld Control Module. Install any desired configuration of Agilent 1200 Serie (more)s modules. The control module software will reflect which modules are present in the LC system and adjust the screens accordingly. Enter parameter settings for every module, perform reset and on/off functions as well as calibration and configuration settings in a self-explanatory and intuitive way.Define automated analyses including methods, timetables, injector programs, method sequences and automated calibration settings using the control module.Protect your method from any inadvertent keyboard changes by setting method protection. Use PC cards to store and transfer methods and sequences between Agilent 1200 systems. Monitor all operations and error events using the self-updating logbooks. Use the context-sensitive on-line information system to get further information on all topics. Use the context-sensitive menu function to have the quickest access on related functions. Display data graphically using the Plot screen where as many as three different signal scan be monitored at the same time. Print in formation to a PCL3 compatible printer connected to the serial RS232 port of an Agilent 1200 module.