Radwag CY10.30.F1.K.M3 Multifunctional Scale

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

Measurement with application of 4 load cells is a guarantee of precise mass reading, regardless of l (more)oad positioning on weighing platform. H315.4 H/Z The platform scales H315.4 H/Z series is fully made of stainless steel profiles with stainless steel weighing platform. The scale features 4 load cells, and it is prepared for mounting as a pit version. The device comes standard with opening weighing platform enabling easy cleaning the area beneath the platform. The H315.4 H/Z series features a stainless steel terminal PUE H315 series with backlit LCD display and function buttons. The terminal is installed on a long cable for easy mounting it on a wall. The scale is powered from mains, RS 232 interface comes standard. Scales is available in dual range version on surcharge. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

HX7 H scale’s multi functions Many functions, many interfaces and great robustness (IP66/ IP68 (more)) mean many possibilities for you to use this advanced scale. Tomorrow you can apply it to a different process than today – that’s the multifunctionality. That’s the saving! Use the potential Barcode scanners, receipt printers, label printers, external displays, control buttons, light signalling towers and other controlling/ signalling devices – thanks to multipurpose software, HX7 scale can work with all of them. You can easily connect them thanks to the fact that the balance is equipped with interfaces: RS232, RS485, USB, Ethernet, 4 IN/ 4 OUT. Optionally, the balance can be equipped with 12 IN/ 12 OUT and analog output module. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Easy and pleasant Simple and convenient operation with a 7-inch color display. Perfectly visible messages additionally supported by bargraph. The top part of the operation panel features a bar graph consisting of 9 red and green diode fields. The bar graph is a graphic visualisation informing the user on a current net weight of a product presented with reference to the scale range or declared min and max thresholds. The bracket allows the terminal to be placed on any flat horizontal surface or screwed to the wall with adjustable angle. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The construction of the scale is made of a stainless steel. This guarantees you work for many years. Not just weighing But also parts counting, dosing, percent weighing and formulations. The power of HX7’s working mods. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Referring to stored weighings you can generate weighing reports, formulation reports and reports on performed control processes. Single weighing is stored in the ALIBI memory as long as it is specified by a Weighing Storage Period (days) parameter.

HX7 HR scale’s multi functions The HX7 HR scale is a device comprised of AISI 304 (IP66 / IP68 (more)) stainless steel terminal the PUE HX7, and AISI 316 (IP 68 / 69K) stainless steel weighing platform. The HX7 HR has been designed to operate in challenging conditions, even in places where the platform is exposed to acids. Display The 7” colour graphic display and the diode bar graph, which signals current net weight of a load in reference to the scale range or declared min, max thresholds, boost comfort especially in case of piecework where fast and precise presentation of product mass deviation is required with regard to the limit values. Hermetic communication interfaces Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the terminal at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Software The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Terminal’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded (more) 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP66 / IP68, makes it suitable for use in industry. HX7.4 H/Z Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. The terminal's system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

This listing is for a Monmouth Guardian MSC T1200 Class 2 Biological Safety Cabinet. The unit is in (more) full working condition and is ready for immediate release. The Monmouth Guardian MSC T1200 is a Class 2 Biological Safety Cabinet designed for microbiology and biotechnology applications. Here are some key features and specifications: Dimensions: Working Chamber: 741(h) x 1107(w) x 510(d)mm, Overall External: 1321(h) x 1200(w) x 750(d)mm Air Cleanliness: ISO Class 4 | H14 HEPA Filter – 99.97% efficient at 0.3um Motorised Sliding Sash: Allows for easy access and manipulation of samples UV Light: Included for additional disinfection and decontamination Power Consumption: 0.15kW Noise Level: 64dB when running

Boekel Scientific 302111 Blood Collection Mixer, with Soft Carry Case, 115/230v The unit has an easi (more)ly viewable, bright color touch screen that displays the collection data in real time. The most important collection details such as current volume, target volume, percent full, elapsed collection time and estimated time remaining are displayed during operation. The unit also has a large active pictorial that visually represents the blood collection bag, so phlebotomist can observe the progress from a distance while tending to other donors. The blood collection mixer also has a highly accurate scale, removable long-life battery pack, USB and Ethernet data ports. The system has an integrated handle, removable magnetically attached mixing tray, and a lightweight robust design for easy relocation at mobile donor centers. The system alarms include low flow warning, end of cycle and low battery. Contact your local medical equipment distributor or Boekel Scientific directly for more information. Features: - Blood Collection Mixer, with Soft Carry Case, 115/230V - Displays Current Volume, Percentage Full, Elapsed Time, and Start Time - Vivid Color Touch Screen That Can Easily Be Viewed From Across The Room - Integrated Lifting Handle and Magnetically Attached Mixing Tray - Long-Life Interchangeable Battery - USB and Ethernet Data Ports - Made in the U.S.A - Two-year Warranty Click Here to View Product Video INCLUDED: The Boekel Scientific 302111 Blood Collection Mixer, with Soft Carry Case, 115/230v includes: - Transport Case for Easy Portability - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Print resolution: 203 dots/inch, 8 dots/mm or 300 dots/inch, 12 dots/mm Dot size (WxL): 203 dpi – 0. (more)110 x 0.132 mm, 300 dpi – 0.110 x 0.132 mm Maximum print width: 203 dpi – 108 mm, 300 dpi – 105.7 mm Bar code modulus: 203 dpi – 5 mil to 50 mil, 300 dpi – 3.3 mil to 33 mil Programmable constant print speeds: 51, 76, 102, 127 and 152 mm/s Media label length: Minimum (tear off) – 17.8 mm, Minimum (peel off) – 12.7 mm, Maximum – 991 mm Media label width: Minimum – 19 mm, Maximum – 114 mm Media total thickness (including liner, if any): Minimum – 0.076 mm, Maximum – 0.25 mm Media maximum roll outer diameter: 76 mm core – 203 mm, 25 mm core – 152 mm Media inter label gap: Minimum – 2 mm, Preferred – 3 mm, Maximum – 4 mm Media ticket/tag notch size (WxL): 6 x 3 mm Media hole diameter: 3.18 mm Media notch or hole position (centered from inner media edge): Minimum – 3.8 mm, Maximum – 57 mm Media black mark density: > 1.0 ODU Media maximum density: ≤ 0.5 ODU Ribbon width: Minimum – 51 mm, Maximum – 110 mm Ribbon standard lengths: 2:1 media to ribbon roll ratio – 300 m Ribbon core inside diameter: 25 mm Dimensions (HxWxD): 277 x 242 x 432 mm Weight: 9.1 kg

The Audit Trail Reader is a freeware RADWAG software supporting Audit Trail function available for H (more)Y10, WLY, WPY series weighing instruments. The function registers operator’s activity from the moment of logging in. The Audit Trail Reader easily and quickly connects with the weighing instrument and enables export of files to pdf, xls, csv, html formats. The latest version of Audit Trail Reader: 18.03.15.0.