Radwag C315.4.1500.C8 Platform Scale

Stainless steel platform scale with four sensors No matter where you place the load on the platform, (more) the result will always be correct. This is due to the four sensors built into the platform. You will appreciate this especially when weighing an irregularly shaped object. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale works anyway (up to 7 hours). Power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! Work as you like The PUE H315 terminal sits on a 3-meter cable that allows you to hang the terminal on the wall. This allows you to arrange your weighing workplace in many ways. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The membrane keyboard is another argument in the discussion of the water resistance of this scale. If you need a dual-range scale, we can make one for you at an extra cost.

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don’t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

Varioshake shaking incubator These LAUDA tools are renowned for being extremely reliable and suitabl (more)e for heavy use. Specialized in gentle mixing and vigorous shaking, these shaking incubators are used for applications that require repeatable orbital movements and temperatures up to +70°C with excellent stability. They are preferred by standard or research laboratories for incubation, fermentation, homogenization, chemical and biochemical reactions, enzyme and tissue studies, as well as for the cultivation of bacterial cultures. Applications: homogenization, incubation, fermentation or chemical and biochemical reactions. The control panel features soft-touch keys with clear symbols. It will therefore be very easy to set the temperature, the stirring frequency or the incubation time quickly and precisely, rest assured that the technology of these instruments will exactly reproduce the set values. The temperature - Temperature regulation is controlled by a microprocessor, PID type with RS232 interface. - The temperature distribution is optimal throughout the interior of the cabinet. - Temperature setting and display: digital, LED, in 0.1°C increments. - Temperature range: from 8°C above ambient temperature to + 70°C. - Temperature range (with cooling coil; not included): 20 to 70°C, depending on the cooling medium used and the ambient temperature. - Electronic monitoring of the temperature controllers activates visual and acoustic alarms in the event of a fault. In these cases the heating switches off automatically and the cause of the anomaly is shown on the display. Agitation and Incubation - Quiet and robust stirring mechanism with gentle start and smooth, load-independent orbital motion - The orbital motion can be turned on and off - Shaking frequency and incubation time can be set thanks to the microprocessor. - The timer continuously displays the remaining incubation time and acoustically signals its expiration. Specific features of the VS 150 OI model This model, with a liftable acrylic glass cover, consists of an external housing made of electrolytically galvanized and powder-coated sheet steel. The vibrating platform, made of aluminum, has 4 plastic pins to accommodate a vibrating tray or a universal support. - Capacity of 2 agitator trays; for containers over 180 mm only 1 tray can be used - Temperature stability ±0.2°C - Shaking frequency: 20 to max. 250 min-1 - Stirring width: 30 mm - Usable volume 150 L - Shaking frequency min. 20 min-1 - Shaking frequency max. 250 min-1 - Amplitude of shaking 25 mm - Load capacity max. 20 kg - Timer from 1 minute to 999 - Vibrating platform width 674 mm - Vibrating platform depth 540 mm - Capacity approx. 150 L / 2 stirring trays - External structure in electrolytically galvanized steel sheet, powder coated

Scilogex SCI280-Pro Circular LED Digital Hotplate Stirrer Bundle w/ PT-1000 Sensor, Sensor Stand, &a (more)mp; 50mm x 8mm Magnetic Stir Bar, 110V Speed Range 200 to 1500 RPM Temperature Range Ambient to 280C Maximum Stirring Quantity 3L Features - Heat only, stir only or heat and stir together functions - Digital temperature control with max. temperature up to 280C - Digital speed control with max. speed up to 1500rpm, with new brushless motor - Stainless steel work plate with ceramic coating provides good chemical resistant performance and easy cleaning - LED display shows temperature and speed - External temperature control is possible by connecting the temperature sensor (PT1000) with an accuracy at ± 0.5C - The “HOT” warning will flash when the work plate temperature is above 50C even if the hotplate is turned off - Accessory reaction blocks for flasks and vessels available - Electronic speed control for constant speed even during changes in load - cTUVus approved for UL and CSA The Scilogex SCI280-Pro Circular LED Digital Hotplate Stirrer Bundle w/ PT-1000 Sensor, Sensor Stand, & 50mm x 8mm Magnetic Stir Bar is a very economically priced LED digital hotplate stirrer ideal for handling small volume tasks on daily application, as a low temperature magnetic stirrer with maximum temperature at 280C. This compact unit can be used as a hotplate, stirrer, or combination. INCLUDED: The Scilogex SCI280-Pro Circular LED Digital Hotplate Stirrer Bundle w/ PT-1000 Sensor, Sensor Stand, & 50mm x 8mm Magnetic Stir Bar, 110V includes: - Ceramic Coated Steel Plate - PT-1000 Temperature Sensor - Sensor Support Stand - 50mm x 8mm Magnetic Stir Bar - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Polyscience BA05A1G3-110A1NC DuraChill Benchtop Chiller, -10C to 30C, 450W, 120V Flow Rate 15L/min  (more)(4 gpm) Temperature Range -10C to 30C Cooling Capacity 450W at 20C Features - Intuitive touchscreen display with 5 operating languages (Chinese, English, French, German, Spanish) - Full text messages and audible alarms - Continuous fluid level monitoring to prevent premature pump failure - Variable Fan Speed Technology for quieter operation - UV Light Biological Growth Inhibitor - Patented Self-diagnostic system - Low flow shutoff and alarm, high and low temperature alarms - Displayable temperature units in °C or °F The Polyscience BA06A1G3-110A1NC DuraChill Benchtop Chiller offers advanced cooling technology with a temperature range of -20C to 30C and a cooling capacity that varies from 150W at -20C to 900W at 20C. It features a microprocessor-based temperature controller with a high-resolution TFT LCD display, enabling temperature readouts in °C or °F and pressure display with an accuracy of ± 35% of full scale. The user-friendly interface includes a touch screen display, a multi-language interface, and touch keypad for precise temperature set-point adjustments. The chiller utilizes a Cool Command modulated refrigeration system to enhance temperature stability and extend compressor life, while the WhisperCool Environmental Control System optimizes noise reduction and energy efficiency. It comes equipped with a centrifugal (magnetic drive) pump capable of delivering a flow rate of 15L/min at 0 psi, with pressure up to 18 psi. Additional features include continuous level sensing in the standard reservoir (1.5L capacity) for pump protection, and an optional UV Anti-Growth Light to prevent biological growth in the process fluid. This makes the DuraChill Chiller a robust and efficient solution for demanding applications where tap water cooling systems fall short. Click Here to View Product Video INCLUDED: The PPolyscience BA05A1G3-110A1NC DuraChill Benchtop Chiller, -10C to 30C, 450W, 120V includes: - 1 Pair of 1/2" NPT x 3/8" Barbed Fittings - 1 Pair of 1/2" NPT x 1/2" Barbed Fittings - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA mini G Fixed Speed 6,000 RPM Capacity 8x 2.0ml Speed deviation 5% Features - Features a transpar (more)ent cover for constant observation and can accommodate PCR-vessels and PCR-strips - Safety feature ensures operation only when the lid is closed, with easy lid opening at the press of a button - Fixed speed set at 6000 rpm with a digital timer adjustable from 1 to 99 minutes for precise control - Integrated quick stop for immediate cessation of operation and fast startup speed for efficient usage - Compact design ensures it fits easily in any lab space, complemented by quiet operation for minimal disturbance - Speed range consistently maintained at 6000 rpm with a 5% speed deviation - Features an automatic cover opening and tool-free rotor exchange for easy maintenance Mini-centrifuge for all applications which do not require high speeds, e.g. micro-filtrations and cell separation. Transparent cover allows constant observation of centrifuge. The mini-centrifuge can be used for both PCR-vessels and PCR-strips. As a safety feature, the centrifuge will run only when the lid is closed. Lid opens easily with the press of a button.INCLUDED: The IKA mini G includes: - IKA mini G - Rotor for 8 x 1.5/2 ml vessels - Rotor for 4 x 8 x 0.2 ml PCR strips - 8 adapters for 0.5 ml vessels (8 pcs.) - Adapter set for 0.4 ml vessels (8 pcs.) - Adapter set for 0.2 ml vessels (8 pcs.) - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark Incu-Shaker 10L Shaking IncubatorFeatures - Exceptional temperature uniformity and accurac (more)y - Powerful brushless induction drive designed for years of trouble-free service - Minimized noise and vibration due to the advanced motor isolation system - Temperature control in increments of 0.1°C - Shaking speeds from 30 to 300 RPM - Speed control in increments of ±1 RPM - Horizontally circular 19mm orbit for aeration & mixing - Timer control from 1 minute to 48 hours, or continuous use Precision touch screen control and monitoring of time, shaking speed, and temperature with advanced views for temperature and shaking The included non-slip platform is ideal for a number of vessels such as tissue culture flasks, petri dishes, staining trays, and more Instantly exchange flasks with the MAGic Clamp Platform accessory, featuring a unique magnetic attachment method The Incu-Shaker 10L is a heavy-duty performer, designed for heavy workloads and continuous use. Its outstanding temperature accuracy and uniformity are supported by proprietary heat distribution technology that ensures that temperatures are precisely maintained throughout the chamber. Inconsistencies due to stratification are reduced to negligible levels and the selected temperature is precisely maintained within 0.25%, even in the corners. Features a touch screen control over time, speed, and temperature settings. The powerful brushless induction drive is designed for years of trouble-free service, even under continuous use conditions with heavy loads. Noise and vibration are minimized by an advanced, computer designed motor isolation system. Like other Incu-Shaker models, the 10L is built to last. A standard, rubber mat platform is included and is ideal for use with tissue culture flasks, Petri dishes, staining trays and other flat vessels. The convenient MAGic Clamp platform is also available for use with Erlenmeyer flasks and test tube racks. The unique, magnetic attachment method is the easiest way to instantly change between flask clamps of different sizes. INCLUDED: The Benchmark Incu-Shaker 10L Shaking Incubator includes: - 18 x 18 in Rubber Mat Platform - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Adam Equipment LAB 214E Luna Analytical Balance, 210g, 0.0001g Capacity 210g Readability 0.0001g Re (more)peatability 0.0002g Features - Vivid, backlit LCD easily visible in any lighting conditions - Colour-coded keys facilitate quick recognition of the most frequently used buttons - Level indicator and adjustable feet ensure proper balance setup for optimum weighing results - Security slot for optional Kensington-type lock and cable to help prevent theft - Large, grade 304 stainless steel pan allows easy cleaning - Sealed keypad protects against dirt and spills - USB and RS-232 interfaces provide speedy communication with computers and printers - External calibration allows for verification and adjustment with weights ("I" models also feature internal automatic calibration) - Multilingual display allows use in many different countries - Parts counting with preset sample sizes - Printouts include date and time for data tracking within Good Laboratory Practices (GLP) guidelines - Selectable digital filtering for animal/dynamic weighing enables consistent results for moving subjects - Auto power-off to save energy The Adam Equipment Luna Analytical Balances are designed with an array of features and functions to accommodate most lab applications. The Luna range offers improved performance for faster, more accurate readings. With stylish, modern backlighting, Luna’s impressive display gives an aura of smart sophistication. The LCD features large, readily discernible 24mm digits in white on a black background. Multilingual text and display capability make Luna well-suited for users in various regions. For simple operation, navigation buttons are color-coded, helping users perform functions with minimal training. Luna provides USB and RS-232 interfaces to facilitate data collection and transmission to computers or printers. ABS plastic construction and rugged grade 304 stainless steel pan mean Luna is easy to clean and can withstand demanding lab use. Available in four models with capacities up to 250g, Luna offers a readability of 0.0001g and can perform basic and detailed measuring tasks. INCLUDED: The Adam Equipment LAB 214E Luna Analytical Balance, 210g, 0.0001g includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty