Radwag C315.150/300.C2.R Load Cell Platform Scale

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don’t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don’t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

Ramp scales with stainless steel load cells is widely applied in meat, fish, pharmaceutical, cosmeti (more)c and chemical industry. The H315/4N series is manufactured in complete stainless steel technology with stainless steel indicator PUE H315 series installed on a long cable. Ramp scales is manufactured from OH18N9 stainless steel with IP 68. On special order, it is possible to manufacture ramp scales in upgraded anti-corrosion stainless steel version. Scales is available in dual range version on surcharge.

The HX7.4 C scale is a solution based on a stainless steel PUE HX7 terminal (AISI 304) and a powder  (more)coated 4-load-cell platform. The terminal The terminal is characteristic for a 7” colour graphic display. Its novelty is a red-green 9-diode bar graph presenting the current net mass in reference to the scale range or preset min and max thresholds. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Databases Terminal’s system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing.

Multifunctional scales TMX is designed to fast and precise determination of mass in industrial condi (more)tions. TMX Multifunctional scales TMX comprises terminal PUE 5 and a weighing platform. Labelling system series TMX is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Accuris PR2000-H-1000 qMAX Green, with Blue Tracking Dye, High Rox qPCR Mix, 1000 Reactions Supplied (more) as a ready-to-use 2X master mix, qMax Green has been engineered for high sensitivity, fact cycling and excellent reproducibility. Accuris Hot Start Polymerase provides accurate PCR of a variety of templates including low copy number and difficult sequences, while the proprietary qMax Green intercalating dye exhibits higher fluorescence and lower PCR inhibition than other popular green dyes.These two components are supported by a specially formulated buffer with an exacting combination of salts, PCR enhancers, stabilizers and pH that results in earlier Ct values and a high specificity across a broad dynamic range. An inert blue dye is also mixed into the qMAX Green to allow easy visualization during pipetting. INCLUDED: The Accuris PR1001-HS-1000 Hot Start Taq Master Mix, 2X Conc., 1000 Reactions includes: - Accuris PR2000-H-1000 qMAX Green - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark C3303-6HP Sprint 6H Plus Clinical Centrifuge with 6 x 15ml swing out rotor, 115V The Bench (more)mark C3303-6HP Sprint 6H Plus Clinical Centrifuge is an advanced centrifuge designed for clinical applications. With a 6 position horizontal (swing out) rotor, this centrifuge can hold all common blood collection tubes up to 15ml, making it a versatile instrument for a range of applications. The centrifuge has a US Plug and is compatible with 115V, which makes it easy to use and accessible in a range of settings.The centrifuge features a back-lit, liquid crystal display that allows for digitally set speed in rpm or rcf (up to 4,000rpm/2,850xg) and adjustable speed in increments of 100rpm. This digital display ensures precision control and accuracy during the centrifugation process. Additionally, the adjustable acceleration and deceleration levels provide even more control over the speed and timing of the centrifugation process.The safety imbalance detection system and momentary operation also add to the safety and convenience of the Benchmark C3303-6HP Sprint 6H Plus Clinical Centrifuge. This centrifuge is a reliable and efficient choice for a range of clinical applications.INCLUDED: The Benchmark C3303-6HP Sprint 6H Plus Clinical Centrifuge with 6 x 15ml swing out rotor, 115V includes: - 6 x 15ml Swing Out Rotor - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

Julabo SW23 Shaking Water Bath 115V/60Hz Working Temperature Range 20°C to 99°C Shaking Speed Range (more) 20 to 200 RPM Volume 20L Features - Microprocessor technology with PID temperature control - Bright Multi-Display (LED) - Seamless, splash-proof keypad - Splash-proof mains switch - Electronic timer for setting the running time (0:01 to 9:59 h:min) - On-line communication via built-in RS232 interface - Early warning system with high and low temperature limits - Drain screw for conveniently emptying the bath - Dry-running protection / safety temperature fixed at 105 °C - Wide range of accessories including lift-up Makrolon bath cover available - EasyTemp control software is available free of charge - Removable shaking carriage - Shaking frequency adjustable from 20 to 200 rpm - Shaking frequency indicated on Multi-Display (LED) - Shaking stroke 15 mm - With integrated circulation pump The JULABO SW shaking water baths provide for unsupervised sample incubation. Stainless steel construction with an operating range from +20°C to +99.9°C. User-friendly operation via keypad with bright LED display. Electronic timer from 1 min to 9h 59min. Integrated RS232 interface for integration to PC software for control and data logging. Early low water level warning system. Early warning system with high and low temperature limits ensures that samples maintain the proper temperature. A removable shaking carriage for easy sample removal. A wide range of accessories, including bath covers, are available. Shaking frequency adjustable from 20 to 200 rpm. Shaking stroke = 15 mm. SW22 unit with ± 0.2°C stability. SW23 incorporates a water circulation pump for a stability of ± 0.02°C. INCLUDED: The Julabo SW23 Shaking Water Bath 115V/60Hz includes: - Removable Shaking Carriage - Integrated Circulation Pump - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Yamato CF-802A Cooling Water Circulator 16L, 115V Cooling Capacity 1320W at 10°C Operating Tempera (more)ture Range -20°C to 30°C Temperature Accuracy ±1.0°C Features - User-friendly controller: Controller with high visibility and improved operability. Possible to switch between measured temperature and set temperature. - Easy drainage of condensate water: A condensation drain port is designed near the connector on the upper rear of the unit - Easy to clean intake filter: Filter mounting plate located on the front of the unit can be easily removed when cleaning - Space-saving solvent recovery device stored in the main body as secondary trap: Used to recover solvent gases remaining in the concentration recovery process - Includes 1 Year Manufacturer's Warranty

The newest line of Radwag Mass Comparators enables adjusting mass standards and weights according to (more) the OIML recommendations (R-111) from 1 mg to 5 kg for E1 class and lower. Mass comparators are used both for ensuring traceability of mass measurements, and verification of weights in accordance with the principles of legal metrology. RADWAG Mass Comparators have gained recognition among Accredited Calibration Laboratories in many countries. Mass comparator WAY 5Y.KO series similarly to other models, comprises two components. One of them holds the electronic module, and the other precise mechanical measuring system. The WAY 5Y.KO series comes standard with an aesthetic, large weighing chamber with glass anti-draft shield. All elements of the weighing chamber are manufactured from glass or metal to minimize the influence of electrostatic charges on weighing result. Mass comparator WAY 5Y.KO series features an intuitive menu supporting a user while operating the instrument.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW