Sartorius YCW653-00 F1 5KG Weight

ZWIEBEL calibration weight 200g class E2 INOX Stainless steel laboratory calibration weight Brand: Z (more)WIEBEL Weight: 200 g Type / class: E2 maximum permissible error: ± 0.3 mg Weight checked on a precision balance at 0.01 g (10 mg) - see photo In its plastic box uncalibrated weight

ZWIEBEL calibration weight 100mg class F1 INOX Stainless steel laboratory calibration weight Brand:  (more)ZWIEBEL Weight: 100 mg Type / class: F1 maximum permissible error: ± 0.05mg Weight checked on a precision balance at 0.0001g (0.1mg) - see photo In its plastic box uncalibrated weight

ZWIEBEL calibration weight 100g class M1 INOX Laboratory calibration weight in stainless steel Brand (more): ZWIEBEL Weight: 100 g Type / class: M1 maximum permissible error: ± 5mg LZ 67 Weight checked on a precision balance at 0.01g (10mg) - see photo In its plastic box uncalibrated weight weight slightly damaged, see photo

ZWIEBEL calibration weight 100g class M1 INOX Stainless steel laboratory calibration weight Brand: Z (more)WIEBEL Weight: 100 g Type / class: M1 maximum permissible error: ± 5mg LZ 67 Weight checked on a precision balance at 0.01g (10mg) - see photo In its plastic box uncalibrated weight

ZWIEBEL calibration weight 500g class F1 INOX Laboratory calibration weight in stainless steel Brand (more): ZWIEBEL Weight: 500 g Type / class: F1 maximum permissible error: ± 2.5 mg Weight checked on a precision balance at 0.01 g (10 mg) - see photo In its plastic case uncalibrated weight

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Agilent HS 602 Rotary Vane Vacuum Pump This item was removed from a university laboratory where it w (more)as surplus to requirements. The vacuum pump powers on, with the status light changing from red to green as the pump speed increases. It operates smoothly, with no unexpected noises or vibrations. Includes: - Oil Exhaust Filter NW25 Model: 749-9365R002Serial No.: IT1328A241

Sample preparation stirrer Modernize your laboratory with Guardian 5000 Series shakers, designed to  (more)be safe and deliver exceptional safety and superior performance. Numerous cutting-edge Ohaus features: - SafetyHeat system to protect the laboratory: an industry-leading sensing system uses two independent safety controls to continuously monitor the electronics and shut off the heat before it overheats - Powerful and consistent shaking performance: precise stirring from 60 to 1600 rpm is made possible by the design of a powerful, robust motor with magnet and software controlled ramp rate, ensuring safe stirring even for viscous applications. - Easy to read LCD display with everything you need to know: the bright LCD display includes temperature and speed settings, intuitive icons and hot top indicator - Durable and reliable with SmartHousing: smartHousing is resistant to chemicals with an innovative and easy to clean design; the lines allow any liquid spills to drain out of the instrument Available models: Model e-G51HP07C: plate 178x178mm; flow rate 15 litres; ceramic plate; heating up to 500°C. Model e-G51HS07C: plate 178 x 178mm; flow rate 15 litres; ceramic plate; heating up to 500°C and stirring up to 1600rpm. Model e-G51HS10C: plate 254x254mm; flow rate 18 litres; ceramic plate; heating up to 500°C and stirring up to 1600rpm. Model e-G51HSRDM: plate Ø135mm; flow rate 18 litres; aluminum plate; heating up to 380°C and stirring up to 1600rpm. Model e-G51ST07C: plate 178x178mm; flow rate 15 litres; ceramic plate; stirring up to 1600rpm. Applications Boiling water, water/oil bath preparation, sample and solution preparation, dissolution buffers and reagents, sample concentration Display Backlit LCD display for temperature and speed, green lights when unit is heating and agitating, prominent hot light, probe in use icon, single point calibration icon Operation Stirring from 60 to 1600 rpm, ambient temperature range from +5°C to 500°C (ceramic top) or 380°C (aluminum top), power cord (included), the stirring models include a 1.5” (3.8cm) PTFE coated stir bar Construction Probe connection, SmartHousing™ stays cool to the touch and is resistant to chemicals, IP21 rated, polycarbonate front panel, control knobs, On/Off switch to disconnect heater, integrated pole holder, easy-to-use ceramic or aluminum tops to clean Characteristics Hot top light, audible alarm, SafetyHeat™ protection shuts down heater in case of malfunction, temperature calibration function for 3 probes and 3 platen setpoints

Nikon SMZ645 Stereo Microscope This was removed from a university lab where it was surplus to requir (more)ements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks. Microscope Head: Nikon 1051163Microscope Stand: (Model:C-PS #:1036837)Eye Piece: 2x (Model :C-W10xA/22)

Labtech LT-4000 Microplate Reader This was removed from a university lab where it was surplus to re (more)quirements. The unit powers up but we were unable to test it further at our facility. It is in good cosmetic condition with minor marks.

Ohaus HB1AL Analog Dry Block Heater, 1 Block Temperature Range (High) 75°C to 150°C Control Analog U (more)niformity Within the Block ± 0.1°C at 37°C Features - Supports one interchangeable modular block with over 30 configurations - Tool-free block setup for easy operation - Enhanced tube-to-block contact for maximum heat retention and efficiency - Robust painted steel housing for durability - Features dual temperature adjustment knobs with dial markings for precise control - Versatile utility across various laboratory applications - Designed for long-lasting performance in demanding settings The Ohaus HB1AL Analog Dry Block Heater offers exceptional temperature stability, making it perfect for various applications that demand consistent heating. This heater accommodates one interchangeable modular block, providing over 30 configuration choices to suit different needs. The modular blocks are designed for effortless setup without requiring tools, ensuring optimal tube-to-block contact for superior heat retention and efficient operation. The HB1AL features a robust painted steel housing and is equipped with dual analog temperature adjustment knobs, making it an economical yet reliable choice for any laboratory setting.Please Note: Blocks are sold separately and are REQUIRED for operation. Please view the Accessories tab. INCLUDED: The Ohaus HB1AL Analog Dry Block Heater, 1 Block includes: - Support Rod Holder with Locking Knob - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Scientific Industries SI-0236 Vortex Genie 2 Mixer The Scientific Industries SI-0236 Vortex Genie 2  (more)Mixer offers variable speeds of 600 to 3,200rpm for gentle shaking to rapid vortexing of samples, and can be operated by touch or in continuous mode. This mixer comes with a removable cup head for a single tube up to 40mm in diameter and 200mm in length, and a 3" platform for a beaker, a flask, or multiple tubes. Additional interchangeable mixing heads for holding vessels such as microtubes and microplates are available (sold separately). The mixer's metal housing and shock-absorbing feet provide a stable platform to help prevent walking. This vortexer can be used in cold rooms and incubators. The Vortex Genie 2 is new in the box.INCLUDED: The Scientific Industries SI-0236 Vortex Genie 2 Mixer includes: - Power Cord - Manufacturer's Documentation - 6 Month Parts and Labor Warranty Scientific Industries SI-0236 Vortex Genie 2 Mixer SpecificationsSpeed Range600 to 3,200 RPMMixing CapacityCup head for a single tube; 3" platform for a beaker, flask, or multiple tubesOrbit4mmBase Dimensions165 x 122 x 165 mm (6.5 x 4.8 x 6.5 in)Weight4 kg (8.8 lb)Electrical Requirements120V, 60Hz