Radwag PUE 7.1.600.HRP.M2.2 High Resolution Scale

HRP EX Platform Wherever high readability and precision are important. Wherever good repeatability i (more)n harsh industrial conditions matters. HRP EX Platforms are the ideal solution for any type of industry. Repeatability that cannot be repeated by others HRP EX Platforms have a built-in internal adjustment system. Automatic internal adjustment guarantees the best quality of work and repeatability of results. You save time and avoid the inconvenience of manual adjustment. Hazardous areas are their natural environment HRP EX Platforms have been developed in accordance with Directive 2014/34/EU and the IECEx scheme and, depending on their design, can operate in environments containing explosive gases or dust, classified as zones: 2 and 22. We have equipped them with an intrinsically safe RS 485 communication interface, which allows the platform to work with the PUE HX5.EX weighing meter. To power the platforms, we have dedicated intrinsically safe PM02.EX-1-2 or PM02.EX-2-2 power supplies. Use the potential HRP EX Platforms work with the PUE HX5.EX weighing terminal and are compatible with RADWAG receipt printers. In addition, you will match them with appropriate antivibration tables from our offer, and thus increase the readability of your measurements. The use of stainless steel for the construction of the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing.

Wall-mounting kit has been designed to facilitate installation of 5Y / PUE CY10 terminals on a verti (more)cal surface. The kit enables adjustment of the terminal tilt.

Profinet – an open communication system based on the industrial Ethernet standard. It is a cer (more)tain combination of features of PROFIBUS DB standard and industrial Ethernet. The Profinet interface application ensures compatibility of RADWAG weighing systems with industrial automation elements of other manufacturers. This approach results in easier and faster scales integration with PLCs, HMI operator panels or industrial robots. Profinet is featured in the IM01.EX-5 communication module and MW-01-A5 weighing module, and as an option at an extra charge in PUE HX7 and PUE HY10 terminals, and in HRP platforms (and is not included in HRP.EX platforms).

Four load cell ramp platforms

Ethernet cable (M12 4P connector). Standard cable length: 3 m Compatible with: Scales operated via P (more)UE H315 terminal PUE H315 terminal MWSH weighing module MWLH weighing module

KR-04-2 converter is designed for scales not equipped with the Ethernet interface. The device enable (more)s operation of a scale equipped only with RS 232 in weighing systems based on LAN network. It is intended for PUE C31/H. The converter features a stainless steel housing, RS 232 cable with a hermetic plug, Ethernet cable fed through a cable gland and terminated with RJ45 plug. The latest version of Network Enabler Administrator software: 2.11

·       Triple Quad MS/MS ·       Ion Max ESI, APCI and APPI Source ·       Mass Range: m/z 30–1500  (more)·       H-SRM up to 0.2Da resolution ·       Fast positive/negative mode switching ≤ 25 ms ·       2 Edwards Rotatary vane Pumps ·       Xcalibur Data System ·       Surveyor HPLC included ·      Option: Other HPLC systems available

Temperature Range: Ambient +5°C to 50°C CO2 Concentration Range: 0 to 20% CO2 Sensor Technology: TC  (more)Sensor Relative Humidity: <90% at 37°C Humidity Source: Water Pan Lighting: LED Capacity: 40 L Chamber Material: Polished Stainless Steel Interior Dimensions (DxWxH): 355 x 305 x 355 mm Dimensions (LxWxH): 597 x 470 x 465 mm

Scale WPY for statistic control WPY/PGC is equipped with modules that put packed products control in (more)to practice. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after controlling pre-defined quantity of packages (samples). Number of the packages is fixed by scale program depending on product batch size. Scales are equipped with 5,7&quot; colourful, graphic touch screen display for previewing information concerning currently performed control and its result. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for prepacked products control report. The report is automatically saved in scale memory and at the same time it can be printed by printer connected to scale. Scale coupling with computer program enables: keeping weighing records from successive weighments in the database, automatic printout of control processes from computer software level, sending user defined codes from scale to computer software; the codes match weighed product (product code, operator code, batch quantity, batch no., control Start/Stop), defining product codes and their descriptions (names) from the level of computer program, therefore user can assign an individual product name suitable for the company&#39;s branch. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).

Waterproof stainless steel platform We provide you with waterproof stainless steel platforms with re (more)adability [d] from 1 g to 100 g and maximum capacity [Max] from 3 kg to 300 kg. The platforms are rectangular in 150 x 200 mm, 250 x 300 mm or 400 x 600 mm or square in 410 x 410 mm, 800 x 800 mm, 500 x 500 mm, 600 x 600 mm or 800 x 800 mm. Use the potential Our platforms can work with one of six weighing terminals to choose from: PUE H315, PUE C315, PUE 7.1, PUE HX7, PUE HY10 and PUE 5. The power of steel The use of stainless steel for both the pan and the frame guarantees you a long life for the platform. Fearless of its contact with moist objects or accidental splashes. The entire stainless steel construction translates into a high degree of protection for these platforms: IP 68.

Labconco SteamScrubber Glassware Washer, undercounter SteamScrubber Glassware Washers have stainless (more) steel top and bottom racks that accommodate basket inserts for a wide variety of beakers and other wide-mouth laboratory glassware. Specialized inserts for BOD bottles, petri dishes, culture tubes and small utensils make the SteamScrubber versatile. It can accommodate Upper and Lower Spindle Racks (for forced air drying see FlaskScrubber washers). Features Achieve higher water temperatures for enhanced washing, faster drying, and sanitizing LCD information center for customizing cycles and monitoring operations, including internal water temperature (C or °F) and alarms High water circulation rates for thorough cleaning: 96 gal./min. (363L/min.) when operated on 115V 60Hz, and 112 gal./min. (424L/min.) on 230V 50/60Hz Dual pumps: one for washing and one for draining, to reduce potential for cross-contamination Built-in purified water pump brings unpressurized or pressurized purified water into tank for up to six pure water rinses Built-in steam generator produces hot vapor to penetrate and remove dried residue for cleaner glassware Manual-fill dispensers for detergent (powder or liquid) or rinse aid solution Two user-set cycle programs User-set delayed start (up to 8 hours) Optional tempered safety glass viewing window with 25w interior light Environmentally Friendly: Item contains environmental attributes or features (e.g. water conserving, lead-free, etc.) as described in the item detail Click Here to View Product Video INCLUDED: The Labconco 401001000 SteamScrubber Glassware Washer, undercounter, 115V, 60Hz includes: - Upper and Lower Standard Racks - Leveling Feet x 4 - Screws x 2 - Hose Clamp - Drain Hose - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA KS 130 Control Shaker Type of Movement Orbital Speed Range 0 to 800 RPM Shaking Stroke 4 mm Fea (more)tures - Electronic adjustment of speed and timer - A digital display makes it possible to read the speed, timerfunction and operating modes - Electronic time switching clock: 0 - 9 h 59min or continuousoperation (endless) - With integrated end point positioning (for automatedrobot-controlled sampling) - All functions can be controlled and documented withlabworldsoft® - Wide range of attachment combinations makes it possible touse almost all shapes and sizes of vessels - Attachments are not included in delivery, please orderseparately The KS 130 control open air orbital shaker is a reliable and efficient solution for laboratory applications that require gentle mixing of samples. It has a compact and flat design, making it easy to fit into any lab space. With a maximum shaking weight of 2.0 kg, it can handle a variety of vessel sizes and shapes. The shaker's integrated end point positioning function is highly useful for automated robot-controlled sampling.INCLUDED: The IKA KS 130 Control Shaker includes: - KS 130 control - Attachment screws (4x) - Single-head wrench - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA KS 130 Control Shaker Specifications Type of movementorbitalShaking stroke4 mmPermissible shaking weight (incl. attachment)2.0 kgMotor rating input45 WMotor rating output10 WPermissible ON time100 %Speed min (adjustable)80 rpmSpeed range0 - 800 rpmSpeed displayLCDTimeryesTimer displayLCDTime setting range1 - 599 minOperating mode timer and continuous operationShaking table lock yesDimensions (W x H x D)270 x 98 x 316 mmWeight8.8 kgPermissible ambient temperature5 - 50 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 21RS 232 interfaceyesAnalog outputyesVoltage220 - 240 / 100 - 120 VFrequency50/60 HzPower input45 WComparison of ModelsSpecificationsIKA KS 130 Basic ShakerIKA KS 130 Control NOL ShakerIKA KS 130 Control ShakerIKA KS 260 Basic ShakerIKA KS 260 Control NOL ShakerIKA KS 260 Control ShakerIKA KS 501 Digital ShakerShaking Stroke4 mm4 mm4 mm10 mm10 mm10 mm30 mmPermissible Shaking Weight (incl. attachment)2.0 kg2.0 kg2.0 kg7.5 kg7.5 kg7.5 kg15 kgMotor Rating Input45 W45 W45 W45 W45 W45 W70 WSpeed Range80 - 800 rpm80 - 800 rpm80 - 800 rpm50 - 500 rpm10 - 500 rpm10 - 500 rpm0 - 300 rpmTimerYesYesYesYesYesYesYesTime Setting Range5 - 50 min1 - 599 min1 - 599 min5 - 50 min1 - 599 min1 - 599 min1 - 55 minDimensions (W x H x D)270 x 98 x 316 mm270 x 98 x 316 mm270 x 98 x 316 mm360 x 98 x 420 mm360 x 98 x 420 mm360 x 98 x 420 mm505 x 120 x 585 mmRS 232 InterfaceNoYesYesNoYesYesYesAnalog OutputNoYesYesYesYesYesYesVoltage220 - 240 / 100 - 120 V220 - 240 / 100 - 120 V220 - 240 / 100 - 120 V220 - 240 / 100 - 120 V220 - 240 / 100 - 120 V220 - 240 / 100 - 120 V230 / 115 / 100 V.comparison-table tr td:nth-child(4) { background-color: #fffacd; }