Radwag PUE 7.1.32.HRP High Resolution Scale

HRP EX Platform Wherever high readability and precision are important. Wherever good repeatability i (more)n harsh industrial conditions matters. HRP EX Platforms are the ideal solution for any type of industry. Repeatability that cannot be repeated by others HRP EX Platforms have a built-in internal adjustment system. Automatic internal adjustment guarantees the best quality of work and repeatability of results. You save time and avoid the inconvenience of manual adjustment. Hazardous areas are their natural environment HRP EX Platforms have been developed in accordance with Directive 2014/34/EU and the IECEx scheme and, depending on their design, can operate in environments containing explosive gases or dust, classified as zones: 2 and 22. We have equipped them with an intrinsically safe RS 485 communication interface, which allows the platform to work with the PUE HX5.EX weighing meter. To power the platforms, we have dedicated intrinsically safe PM02.EX-1-2 or PM02.EX-2-2 power supplies. Use the potential HRP EX Platforms work with the PUE HX5.EX weighing terminal and are compatible with RADWAG receipt printers. In addition, you will match them with appropriate antivibration tables from our offer, and thus increase the readability of your measurements. The use of stainless steel for the construction of the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing.

RS 232 cable: MAS.1 module - computer. Cable length: 2 m Compatible with: MAS.1 module MAS.1.R modul (more)e

It is 50 cm long. It is compatible with HX7 scales.

Additional WD-4/5 LCD display has been designed to connect with automatic scales. The display is equ (more)ipped with a plastic housing and LED backlight. It is powered from a balance indicator. Features: Automatic baud rate recognition Screen saver

Wherever high readability and precision are important. Wherever good repeatability in harsh industri (more)al conditions matters. Waterproof steel platforms are the ideal solution for any type of industry. Use the potential Our platforms can work with one of four weighing terminals to choose from: PUE 7.1, PUE HX7, PUE HY10, PUE 5. They have four load cells, which means that no matter where you put the goods on the pan, the measurement result will always be the same. The power of steel The use of stainless steel for both the pan and the frame guarantees you a long life for the platform. It is not intimidated by contact with moist objects or accidental splashes. The entire construction made of stainless steel translates into a high degree of protection for these platforms: IP 68.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

High Capacity HRP Platform Wherever high readability and precision are important. Wherever good repe (more)atability in harsh industrial conditions matters. High Capacity HRP Platforms are the ideal solution for any type of industry. Repeatability that cannot be repeated by others High Capacity HRP Platforms have a built-in internal adjustment system. Automatic internal adjustment guarantees the best quality of work and repeatability of results. You save time and avoid the inconvenience of manual adjustment. Unbreakable High Capacity HRP Platforms feature a modern electromagnetic mechanism design in a sealed steel housing and overload protection. The use of stainless steel for the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing. High Capacity HRP Platforms are distinguished by a high degree of protection IP 67. For an additional charge we will make HRP platforms in Ex version, but in order for the device to work in explosive areas, you need to supply the PUE HX5.EX terminal. Use the potential High Capacity HRP Platforms work with one of two weighing terminals: PUE 7.1 or PUE HY10. The terminals’ software enables you to archive your work results, ensures data safety, and allows the platforms to work with powerbanks from our offer. In turn, you will select appropriate antivibration tables for the platforms, and thus increase the readability of your measurements.

Convenient Transportation of Small Mass Standards The mass standards tweezers are tongs/ pliers that (more) will enable you to conveniently and precisely grasp and transport small mass standards. With it, you can easily and quickly place or lay an object (for example, a mass standard) on the pan and remove it from the pan. The tweezers protect the mass standards from finger grease, moisture and other factors that interfere with the measurement. It is indispensable in the daily use of laboratory balances. Tweezers 300 mm Material: stainless steel with a silicone tip for standards up to 500 g What Kind of Tweezers for Mass Standards? TWEEZERS LENGHT APPLICATION Standard 105 mm up to 50 g 160 mm up to 200 g 250 mm up to 500 g 300 mm up to 500 g Made of carbon fiber 105 mm up to 50 g With a carbon fiber tip 105 mm up to 50 g 155 mm up to 200 g 185 mm up to 200 g 200 mm up to 200 g

Labconco 9000720 WaterPro PS/UF Life Science Model Polishing Station, 115V, 60Hz Features - Timed  (more)dispense for unattended operation - Automatic/intermittent recirculation through polishing loop to maintain water quality, minimize bacterial growth and reduce rinse up time - Attractive and corrosion-resistant Type 304 stainless steel front panel - Unpigmented virgin natural polypropylene bowls have no impurities to contaminate water. - Water quality alert. LED flashes the actual megohm-cm when water quality falls below set point. - Built-in dispensing center - Quiet 1/4 hp motor and rotary vane recirculation pump - Dispensing valve - Wall mountable - TOC dump valve allows a small portion of purified water to drain during automatic recirculation to maintain low TOC levels (Analytical Instrument and Hybrid models). - UV flush valve allows a small portion of the purified water to rinse the ultrafilter during automatic recirculation to extend the life of the ultrafilter (Life Science and Hybrid models). - ETL listed (115 volt models) - CE Conformity (230 volt models WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve or optional dispensing gun at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.The control panel includes a timed dispense feature that allows unattended dispensing of pure water without risk of overfilling. The dispenser shuts off automatically once user-set time has elapsed. Labconco has designed WaterPro PS Stations with the right combinations of purification technologies to meet your needs. Choose from specialized stations for general chemistry, analytical, life science or combination usage. In addition, models designed for general chemistry may be upgraded with additional purification modules at a later time for use in analytical or life science applications.Click Here to View Product Video INCLUDED: The Labconco 9000720 WaterPro PS/UF Life Science Model Polishing Station, 115V, 60Hz includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Adam Equipment LBB 8001E Luna Precision Balance, 8000g, 0.1g Capacity 8000g Readability 0.1g Repeat (more)ability 0.2g Features - Vivid, backlit LCD easily visible in any lighting conditions - Colour-coded keys facilitate quick recognition of the most frequently used buttons - Level indicator and adjustable feet ensure proper balance setup for optimum weighing results - Security slot for optional Kensington-type lock and cable to help prevent theft - Large, grade 304 stainless steel pan allows easy cleaning - Sealed keypad protects against dirt and spills - USB and RS-232 interfaces provide speedy communication with computers and printers - External calibration allows for verification and adjustment with weights ("I" models also feature internal automatic calibration) - Multilingual display permits use in various regions - Parts counting with preset sample sizes - Printouts include date and time for data tracking within Good Laboratory Practices (GLP) guidelines - Selectable digital filtering for animal/dynamic weighing enables consistent results for moving subjects - Auto power-off to save energy The Adam Equipment Luna Precision Balances can meet the diverse weighing needs in a variety of labs, with numerous features and functions included. The Luna series offers improved performance for faster, more accurate readings. The Luna series also combines durability and performance in a stylish design, with an LCD that delivers results in large 24mm digits in white on a black background. Suitable for international use, Luna provides a useful multilingual text and display capability. RS-232 and USB facilitate data gathering and enable smooth communication with printers and computers. Designed to tolerate demanding lab tasks, Luna is constructed with easy-to-clean ABS plastic construction and a durable grade 304 stainless steel pan. The Luna Precision Balances are available in 20 different models that offer internal or external calibration, capacities from 220g to 15000g, and readabilities from 0.001g to 0.01g. INCLUDED: The Adam Equipment LBB 8001E Luna Precision Balance, 8000g, 0.1g includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty