Radwag High Resolution Platforms PL.10.HRP.EX.H

Edwards XDS Accoustic Enclosure (110V) Edwards’ acoustic enclosures are the ideal noise reduction so (more)lution for use in a laboratory or an industrial environment. The specially designed soundproof enclosures are made of materials with high noise absorption, reducing vacuum pump noise by up to 9 dB(A), with no impact on vacuum pump efficiency.INCLUDED: The Edwards XDS Accoustic Enclosure (110V) includes: - Operator's Manual - 1 Year Manufacturer's Warranty

IKA ULTRA-TURRAX Tube Drive Speed Range 400 to 8,000 RPM Viscosity max. 5000 mPas Speed deviation 3% (more) Features - Features a powerful motor for unparalleled stirring, dispersing, grinding, and homogenization results - Specifically designed for safe processing of infectious, toxic, or odor-intensive samples - Utilizes sealable disposable tubes to minimize cleaning and prevent cross-contamination - Allows programmable test conditions for time, energy, and volume with memory for frequently used parameters - Adjustable rotation direction set through a clear, multilingual menu for flexible operation - Turbo button enables intensive mixing with speeds up to 8,000 rpm for demanding tasks - Speed range from 400 to 8,000 rpm, catering to a wide array of processes - Handles viscosity up to 5000 mPas, suitable for thick samples - Offers speed adjustment in 10 RPM steps for fine control - Compatible with a voltage range of 100 - 240 V and frequency of 50/60 Hz The new IKA UTTD power control disperser gets its name from an even more powerful motor. The disperser assures the best stirring, dispersing, grinding, and homogenization results and has been devised in particular for the safe processing of infectious, toxic or odor-intensive samples. Disposable tubes The sealable disposable tubes have been optimized for your application. They reduce the amount of cleaning required and rule out any risk of cross-contamination. Programmable test conditions Time, energy, volume: You specify and systematically program the test conditions and store frequently used parameters in your library. Adjustable change in direction of rotation When, and how often, the direction of rotation should be changed is very easily set using the clear and multilingual menu.Turbo button Even more intensive mixing, dispersing or grinding at your fingertips: All of this is achieved with the turbo button. Over short periods, rotational speeds of up to 8,000 rpm can be achieved. INCLUDED: The IKA ULTRA-TURRAX Tube Drive includes: - ULTRA-TURRAX® Tube Drive P control - ST-20 Stirring tube, 20 ml (3 pcs.) - DT-20 Dispersing tube, 20 ml - Glass balls (6.0 mm) for BMT tubes - Stainless steel (5.0 mm) balls for BMT tubes - Removal hook - Plastic hose for drainage - USB A-B Cable - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Jenesco Pro-24S Ozone GeneratorThe Pro-24S ozone generator is intended for use incommercial applicat (more)ions, or wherever a high output of ozone is necessary toreduce bacteria, odors, mildew, & mold. It is very powerful, with ozoneoutput potential of up to 24,000 mgph, using the ozone adjustment knob. Ozonegasses are able to penetrate the infected area, attaching itself to themolecules, chemically changing the structure and destroying odors at thesource. The Pro-24 S ozone generator can cover up to 18,000 sq ft for odors,and 6,000 sq ft for mold. It features timed sequences ranging from 15 minutesto 12 hours, but also offers continuous operation simply by using the ‘hold’position on the timer knob. The hour meter registers usage up to 99,999 hours. This 10 lb 20” x 18” x 5” high generator agreat choice for a wide variety of applications. Made in the USA.INCLUDED: The Jenesco Pro-24S Ozone Generator includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Julabo FT200 Immersion Cooler, 115V/60Hz Working Temperature Range -20°C to 30°C Refrigerant R134a  (more)Fluid Type Water, Silicone, Fluorinert/Galden Features - Rapid cooling of liquids down to low temperatures - Counter-cooling of liquids in combination with heating circulators - Environmentally friendly by saving precious tap water - User-friendly operation and handling - Compact design, small footprint - Dry ice substitution JULABO Immersion Coolers provide counter-cooling when connected to a heating circulator or rapidly cool fluids down to a low temperature. With easy operation the units are suitable for a variety of cooling applications. Units are an alternative to cooling with dry ice or tap water. The FT200, FT400 and F900 units simply turn on and the probe cools. Models FT402, FT902 and FT903 include an external Pt100 sensor and display for input of temperature set point. The FT200 has a 9 cm long x 4 cm diameter cooling dumbell. The FT400 / FT402 have a 12 cm long x 5 cm diameter cooling dumbell. The FT900 / FT902 have a flexible cooling probe 65 cm long / 1.5 cm diameter. The FT903 has a solid coil 2.2″ high and 5.5″ diameter. INCLUDED: The Julabo FT200 Immersion Cooler, 115V/60Hz includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

VACUUBRAND BVC Basic Fluid Aspiration System Control Range 100 to 500 mbar Collection Bottle 4L Pol (more)ypropylene Max. Back Pressure (abs.) 1.1 bar Features - Mechanical vacuum regulator and integrated check valve to provide optimum working vacuum and minimize the vapor load on the vacuum network. - Stable base and electricity-free operation for convenience. - Autoclavable collection bottle designed to reduce aero­sol and foam formation; autoclavable quick-couplings available as accessory. - Aspiration hand set VacuuHandControl (VHCpro) with flow-through suction tube - no contamination of handle by aspirated media. - Hydrophobic 0.2 µm sterilizable filter - contamination risks for the vacuum pumping system are greatly reduced; autoclavable as complete unit together with the collection bottle. The BioChem-VacuuCenter BVC basic is designed for connection to an existing external vacuum source like a diaphragm pump or a vacuum network (e.g., VACUU·LAN®) and does not require electric power. The chemical-resistant mechanical vacuum controller always ensures an optimal operating vacuum. The controller opens only when needed thus limiting the gas load on the vacuum source. The evaporation of collected liquid is minimized. The inlet tubing integrated in the bottle head reduces aerosol and foam formation and ensures a long service life of the hydrophobic protection filter. The aspiration system is available either as BVC basic with 4l PP bottle or as BVC basic G with 2l coated borosilicate glass bottle. INCLUDED: The VACUUBRAND BVC Basic Fluid Aspiration System includes: - Complete Fluid Aspiration System for current Vacuum Source - Hose Nozzle DN 6/10mm - VacuuHandControl VHC Aspiration Hand Set - 4L Collection Bottle - Protection Filter - Operator's Manual - 1 Year Manufacturer's Warranty

When you require the ultimate in water purity, PURELAB Chorus 1 provides the perfect solution. Consi (more)stently delivering water purity of 18.2 MΩ.cm (Type I+/I) and underpinned by the advanced PureSure deionization system, the PURELAB Chorus 1 enables you to focus on attaining accurate results while ensuring an uninterrupted workflow. Advanced PureSure Deionization – Eliminates trace ions that leach into your water and provides advanced warning to change the purification packs. Fully Recirculating –  Ensuring microbial purity and guaranteeing pure water at the point-of-use. Real-time TOC Monitoring – Provides complete confidence in organic purity. Integrated Filtration – Ultrafiltration or microfiltration filters out endotoxins, proteins, nucleases, and particulates. Full Spectrum UV Treatment Dispense Flowrate Up to 2.0 l/min Inorganics (at 25°C): 18.2 MΩ.cm Total organic carbon (TOC): 1 – 3 ppb Bacteria: <0.001 CFU/ml Bacterial Endotoxin: <0.001 EU/ml pH: Effectively neutral Particles: < 0.05 µm RNase: <1 pg/ml DNase: <5 pg/ml Purification pack capacity: Liters to 18.2 MΩ.cm = 94,100/(µS/cm + (2.3 x ppm CO2)) Source – originally from potable supply, then pretreated: Preferably RO produced by PURELAB Chorus 3 or filtered service deionization (SDI) or distilled. Fouling index (max): 1 (5 – 10 micron membrane prefilter is recommended for all non-RO feeds Service deionization (SDI) – MΩ.cm: 1 MΩ.cm minimum resistivity at exhaustion Reverse Osmosis (RO) – µS/cm: Recommended <30 µS/cm Free Chlorine: 0.05 ppm max TOC: <50 ppb max (RO feed) Carbon dioxide: 30 ppm (max recommended) Silica: 2 ppm (max recommended) Particulates: Filtration down to 5 – 10 micron advisable to protect internal and/or point of use filters Temperature: 1 – 35°C (Recommend 10 – 15°C) Flowrate (maximum requirement): 130 l/hr (34 USG) Drain requirements: Up to 2 l/min (0.5 USG) Feedwater pressure: 0.7 bar (10 psi) maximum; 0.07 bar (1 psi) minimum Dimensions (HxWxD): 435 x 375 x 340 mm Weight: 19 kg Excluding new filters

Leica HC PL FLUOTAR 40x/1.30 OIL ∞/0.17/OFN22/E Microscope Objective This is being sold on behalf of (more) a client. This is a very rare 40x PLAN FLUOTAR Oil Objective with a high numerical aperture of 1.30. This high NA is very hard to achieve in production with 40x so most companies don't even attempt to create it, due to the cost of high-quality optics and technology required.&nbsp; This objective allows to have a large field of view with high resolution at 1.30 NA. The objective is in as new condition and has only been used for 1 demonstration. The objective is listed for collection only, but we can potentially ship it if needed.The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Varian HS 602 Two Stage Rotary Vane Vacuum Pump This item was removed from a university lab where it (more) was surplus to requirements. It is in very good cosmetic condition and powers on, we are unable to conduct further at our facility.

Multi Job Lot Mixed Items This job lot of items comes from a variety of university laboratories. The (more) items were no longer required, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle and further investment in each individual product may be required. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. Included are; ITEM-35225 Mareno 3000 Induction HobITEM-35204 Alpha Innotech TM-26 UV Transilluminator Lab EquipmentITEM-35292 Buchi Rotavapor R II R-II Rotary EvaporatorITEM-30017 Kent Scientific Isometric Transducer LabITEM-35279 Mettler AT200 Precision BalanceITEM-35191 Razel A-99 Variable Speed Syringe PumpITEM-38692 YSI Model 95 Dissolved Oxygen Meter with ProbeITEM-37912 YSI 550 DO Handheld Dissolved Oxygen Meter With ProbeITEM-37913 YSI 55 Handheld Dissolved Oxygen Meter With ProbeITEM-35198 Thermo Scientific Multidrop 384 Type 832 Microplate Dispenser LabITEM-29975 Pack of 5 - Edwards Odour Elements for EMF20 Oil Mist Filter 22304077ITEM-35298 Carl Zeiss HBO 100 W VHC 100W Lamp Power SupplyITEM-29970 Taylor-Wharton 10LD Liquid Nitrogen Dewar Tank LabITEM-15840 Sokkia / Sokkisha DT6 Digital Theodolite Level for Surveying &amp; Setting LabITEM-17222 Marconi Instruments LTD Oscillator TF1247ITEM-17268 Additive Layer Manufacturing RapMan 3 3D Printer BL-BITEM-35334 Thermo Scientific ARKTIK 5020 Thermal Cycler Dual Block LabITEM-23962 Lot of 3 x 3M Digital Projectors - 2 x X40 and 1 x X66

Chemical resistant vacuum pump consisting of N 840 G diaphragm vacuum pump, base plate and two separ (more)ator bottles on the suction and pressure side. Thanks to the high compatibility of steam and condensate, the system is perfectly suited for extremely aggressive/corrosive gases and vapours. Technical features Flow rate (max.): 20 l / min Final vacuum (max.): 6 mbar (abs.) Pressure (max.): 0.1 bar (rel.) Flow rate (m³/h) at atm. pressure: 2,04 Permissible fluid temperature between 5°C and 40°C Valve material: FFPM Diaphragm material: PTFE coated Pump head material: TFM ™ PTFE Applications Filtration Degassing Vacuum oven Centrifugal concentration Qualitative characteristics Ideal for extremely aggressive / corrosive gases and vapors High compatibility with steam and condensate Integrated gas ballast valve Integrated control of the rotation speed 3-color status display for running / stand-by / error Compact, silent and reliable Chemically resistant compound vacuum system diaphragm vacuum pump, base plate and two separating bottles on the suction and pressure sides Modular; expandable 100% oil-free transfer - then pure transfer, evacuation and compression of gases High compatibility with steam and condensate Ecological Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Pure transferring and evacuation Highly compatible with vapours and condensation Chemically-resistan (more)t Therefore suitable for highly aggressive or corrosive gases and vapours Maintenance-free Environmentally friendly Gastight, leakage rate approx. 6 x 10-3 mbar x l/s, not tested in serial production. Delivery:  60 l/min Ultimate vacuum:  4 mbar Operating pressure: 1 bar Connectors for tube: ID 12 mm Permissible gas and ambient temperature: +5…+40 °C Motor protection: IP 54 Weight 14.8 kg Dimensions (d x h x w): 331mm x 279mm x 291mm 230V / 50HZ / 220W