Radwag Frame for Embedding 6000 H10 Scales in the Ground

HRP EX Platform Wherever high readability and precision are important. Wherever good repeatability i (more)n harsh industrial conditions matters. HRP EX Platforms are the ideal solution for any type of industry. Repeatability that cannot be repeated by others HRP EX Platforms have a built-in internal adjustment system. Automatic internal adjustment guarantees the best quality of work and repeatability of results. You save time and avoid the inconvenience of manual adjustment. Hazardous areas are their natural environment HRP EX Platforms have been developed in accordance with Directive 2014/34/EU and the IECEx scheme and, depending on their design, can operate in environments containing explosive gases or dust, classified as zones: 2 and 22. We have equipped them with an intrinsically safe RS 485 communication interface, which allows the platform to work with the PUE HX5.EX weighing meter. To power the platforms, we have dedicated intrinsically safe PM02.EX-1-2 or PM02.EX-2-2 power supplies. Use the potential HRP EX Platforms work with the PUE HX5.EX weighing terminal and are compatible with RADWAG receipt printers. In addition, you will match them with appropriate antivibration tables from our offer, and thus increase the readability of your measurements. The use of stainless steel for the construction of the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing.

Transponder card reader is used for quick identification and logging of operators to a weighing syst (more)em or identification of vehicles on a weighbridge. CK-02/2 is designed for weighbridges equipped with terminal TMC series. It is installed in a large distance from the terminal (e.g. next to the barriers). Communication through RS485, power supply 9-24V AC from scale terminal. Area of Use: Additional equipment of load cell based industrial scales; Identification of weighing instrument operator; Identification of vehicles on weighbridges. Design: Transponder card reader CK-02 is manufactured in plastic housing with stainless steel mounting kit. There are two mounting kits offered, depending on model. Intended Use: Designed for weighbridges equipped with terminal TMC series. It is installed in a large distance from the terminal (e.g. next to the barriers). Communication through RS485, power supply 9-24V AC from scale terminal.

Wall-mounting kit has been designed to facilitate installation of 5Y / PUE CY10 terminals on a verti (more)cal surface. The kit enables adjustment of the terminal tilt.

PUE-7-36 wall-mounting kit has been designed to facilitate installation of PUE 7.1 and PUE C32 termi (more)nals on a vertical surface. The kit enables adjustment of the terminal tilt. Intended use: Easy installation of PUE 7.1 terminal on a vertical and horizontal surface, adjustable tilt angle, Easy installation of PUE C32 terminal on a vertical and horizontal surface, adjustable tilt angle.

Additional WD-4/8 LCD display has been designed to connect PUE C315 indicator. The display is equipp (more)ed with a plastic housing and LED backlight. It is powered from a balance indicator. Features: Automatic baud rate recognition Screen saver

The covers for weighing platforms with roller conveyors. The rollers are made of stainless steel, an (more)d they are available in two options: with or without side limiters. Intended for scales with weighing pan 600x600 mm.

Heating immersion heater / Thermostat IKA ET B Basic Yellow Line 5L/min 250°C 1500W

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Mixed Job Lot of Laboratory Equipment - Nikon, Eppendorf, Rainin, iCyt, Bio-Tek This job lot of ite (more)ms come from a variety of university laboratories. The items were no longer required, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle and further investment in each individual product may be required. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. ITEM-44613 iCyt Fluidics CartITEM-37198 5 x Elo Monitors. 5 x Monitor Arms + Stands.ITEM-37199 Rainin E3 Rapid Charge StandITEM-37200 Hanwell icespy ThermometerITEM-37201 Lafayette Instrument Grooved PegboardITEM-37204 box of electrophoresis gel tanksITEM-37208 Daventest OvenITEM-44626 LC 1610 Auto Sampler ICI InstrumentsITEM-44632 GBC-ComboITEM-44638 Leica EG F unitITEM-44637 Desaga CamLabITEM-44636 Techne Hybridiser HB-1DITEM-44633 Biometra Trio-ThermoblockITEM-44631 Eppendorf Centrifuge 5415CITEM-44634 Clifton Unstirred BathITEM-44635 3DHistech TMA MasterITEM-44642 Bio-Tek uQuant Microplate Spectrophotometer μQuant LabITEM-44646 Nikon M-35S CameraITEM-44647 Nikon M-35S CameraITEM-44648 LKB Knifemaker Type 7801 AITEM-44650 6x Microtome Steel BladesITEM-44651 Nikon EFMITEM-44654 2x Nikon Power PacksITEM-41257 Nikon Diaphot Phase Inverted Contrast Microscope w/ 3 x Objectives LabITEM-44678 10 x X-Ray CassettesITEM-44679 FSA WhirlimixerITEM-44680 Eppendorf Centrifuge 5415 D

Heraeus Labofuge 400 Function Line Benchtop Centrifuge This was removed from a university lab where  (more)it was surplus to requirements. The unit powers up and runs smoothly up to 3500rpm. It is in reasonable cosmetic condition with light marks and rusting. Heraeus Rotor #81794 x Buckets #8172 Ch.003515

Scale WLY for statistic control Scale WLY is intended to fast and precise determination of mass in l (more)aboratory and industrial conditions. The model line is the response for growing market demands concerning simple operation and maximum automation of the weighing process. The scales enables cooperation with barcode scanner, printer, label printer, RFID readers and standard PC devices (mouse, keyboard, USB storage device). Design and functionality All WLY scales is equipped with stainless weighing pan, TFT 5,7'' colourful touch screen and membrane keyboard. As an option the scale enables connection of an additional weighing platform to the terminal. The following functions are available: programmable proximity sensors, programmable printout templates, programmable text information for scale's operation, printouts. Scale WLY/PGC is equipped with modules that put packaged products control into practice. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after controlling pre-defined quantity of packages (samples). Number of the packages is fixed by scales program depending on product batch size. Scales are equipped with 5,7" colourful, graphic touch screen display for previewing information concerning currently performed control and its result. Scale requires two staged verification process. Due to the influence of gravitational acceleration force the scale has to be adjusted on use site. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for pre-packaged products control report. The report is automatically saved in scale memory and at the same time it can be printed by printer connected to scale. Scale coupling with computer program enables: keeping weighing records from successive weighments in the database, automatic printout of control processes from computer software level, sending user defined codes from scale to computer software; the codes match weighed product (product code, operator code, batch quantity, batch no., control Start/Stop), defining product codes and their descriptions (names) from the level of computer program, therefore user can assign an individual product name suitable for the company's branch. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).

Eppendorf F-35-6-30 Fixed Angle Rotor, Cat. # 022654306 The Eppendorf F-35-6-30 Rotor with lid accom (more)modates 6 x 15/50ml samples, reaching speeds up to 7,830 RPM with a max RCF of 71,970 x g. This fixed-angle rotor F-35-6-30 is for Eppendorf 5430 and 5430R centrifuges. INCLUDED: The Eppendorf F-35-6-30 Fixed Angle Rotor, Cat. # 022654306 includes: - Rotor Lid - Full 1 Year Parts and Labor Warranty Eppendorf F-35-6-30 Fixed Angle Rotor, Cat. # 022654306 SpecificationsMax Speed7830 RPMMax RCF71,970 x gMax Capacity6 x 15/50 mLRadius9.5 cmAngleFixed