Radwag HX7.4P2.3000.H Stainless Steel Multifunctional Beam Scale

Beam scales H315/4P2 series is stable and proved four load cells weighing solution with more versati (more)le application than standard pallet scales. The adjustable distance between the beams (up to 5 meters) enables fitting the H315/4P2/H scales to different loads (cases, long bars, heavy sections). The load to be weighed can be placed on the beams by a standard fork-lift truck. Beam scales H315/4P2/H series is manufactured in stainless steel version. Optionally, the number of beams in a scale can be increased to 4. Beam scales features handles for easy transporting the scales to its place of use. The scales comes standard with an indicator PUE H315 in stainless steel housing, featuring backlit LCD display and function buttons. The indicator is installed on a long cable. The scale is powered from mains 230V AC, RS 232 interface comes standard. Scales is available in dual range version on surcharge.

Beam scales C315.4P2 series is stable and proved four load cells weighing solution with more versati (more)le application than standard pallet scales. The adjustable distance between the beams (up to 5 meters) enables fitting the C315.4P2 scales to different loads (cases, long bars, heavy sections). The load to be weighed can be placed on the beams by a standard fork-lift truck. Beam scales C315.4P2 series is manufactured in mild steel powder coated version. Optionally, the number of beams in a scale can be increased to 4. Beam scales features handles for easy transporting the scales to its place of use. The scales comes standard with an indicator PUE C315 series featuring backlit LCD display and function buttons. The indicator is installed on a long cable. The scale is powered from mains 230V AC, RS 232 interface comes standard. Scales is available in dual range version on surcharge.

HX7.4P2 H is a beam scale made of stainless steel. 4-load-cell, 2-component mechanical design stands (more) for high measurement accuracy. The weights may be loaded onto the pan using a forklift or a transporter crane, supplementary handles significantly facilitate the transport. The device has been fitted with a 7" colour display and a diode bar graph. Blinking green and red diodes show current load mass, the mass is presented in reference to the scale range or declared minimum and maximum thresholds. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

HX7.4P2 H is a beam scale made of stainless steel. 4-load-cell, 2-component mechanical design stands (more) for high measurement accuracy. The weights may be loaded onto the pan using a forklift or a transporter crane, supplementary handles significantly facilitate the transport. The device has been fitted with a 7" colour display and a diode bar graph. Blinking green and red diodes show current load mass, the mass is presented in reference to the scale range or declared minimum and maximum thresholds. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

The HX7.4P C is a brand new design comprised of the advanced PUE HX7 indicator, made of stainless st (more)eel, and a powder coated 4-load-cell pallet construction. It is intended for weighing of Euro pallets as well as any transport pallets of 800 × 1200 mm dimensions. The scale enables loading the weighing pan using a forklift. The indicator thanks to its distinguishing features such as a colour 7” graphic display, and a diode bar graph which signals the current load mass referred to the scale range or the declared min and max thresholds, significantly simplifies the operation. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Mini animal clipper WAHL 1565-0473 Mini Arco New equipment in its original packaging Includes a head (more) and two double undercuts to cut at four heights: 3, 6, 9 and 12 mm. Features: A speed Fast charging time 120 minutes Usage time 100 minutes DC motor, very quiet. 6000 rpm Weight: 140g. Length: 14.9 cm Head width: 4 cm.

Measurement with application of 4 load cells is a guarantee of precise mass reading, regardless of l (more)oad positioning on weighing platform. H315.4 H/Z The platform scales H315.4 H/Z series is fully made of stainless steel profiles with stainless steel weighing platform. The scale features 4 load cells, and it is prepared for mounting as a pit version. The device comes standard with opening weighing platform enabling easy cleaning the area beneath the platform. The H315.4 H/Z series features a stainless steel terminal PUE H315 series with backlit LCD display and function buttons. The terminal is installed on a long cable for easy mounting it on a wall. The scale is powered from mains, RS 232 interface comes standard. Scales is available in dual range version on surcharge. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

Julabo PURA 10 Water Bath, 115V/60Hz Working Temperature Range 18°C - 99°C Heating Capacity 1200W V (more)olume 9.5L Features - Ease of use - Bright display - Splash-proof protected mains switch - Built-in dry running protection - No disturbing elements in the bath - Platform included as standard - Integrated timer - Non-slip rubber feet - Ergonomic recessed grips - Integrated drain screw The PURA water baths stand for a straightforward and safe working in the laboratory. The high-quality water baths offer a temperature stability of ± 0.15°C 2). The working temperature range of +18°C to 99.9°C 1) allows a wide range of applications, such as routine laboratory work, temperature applications for samples, incubation, material testing, corrosion testing, temperature control applications of cultures as well as temperature tests of food and beverages and in the dental field. All models (except PURA 4) come with an integrated drain screw for quick and clean draining of the baths. PURA water baths can be used flexibly and can be easily transported through ergonomic side recessed grips. Non-slip rubber feet ensure a firm footing and more safety in the laboratory. The units are splash-proof, feature a (membrane) keypad and temperature display (LED) for ease of use. Operation in °F or °C with integrated timer. There are no disturbing parts inside the bath so that the entire inner surface can be used to safely temperature-control even small sample containers. Click Here to View Product Video INCLUDED: The Julabo PURA 10 Water Bath, 115V/60Hz (NRTL Certified) includes: - Platform - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA RV 10 Digital Rotary Evaporator w/ Coated Dry Ice Condenser Features - 4L Heating Bath with opti (more)mized heating bath volume allowing for fast-heat up - Left or right flask rotation with a speed range of 20 to 270 RPM - Features smooth start function along with a timer function - RS-232 digital interface for remote control and IR interface - Easy and safe operation due to ergonomical design of the user interface Motorized lift with Safety-Stop function, which lifts the receiving flask from the heating bath in case of a power failure Integrated push-off mechanism to loosen tightly fitting or stuck glassware for easy flask exchange Safety temperature circuits are featured, along with Dry-run protection for an adjustable lower end stop and lock function for the heating bath The RV 10 digital represents the continual enhancement of the IKA RV 10 Rotary Evaporator line. The unit comes with a new universal heating bath, vertical glassware, state-of-the-art safety features and digital connectivity. The RV 10 digital is a robust and reliable lab companion. Its optimized bath volume allows for fast heat-up times. The condenser unit has special designed glass tubes that utilize the 1500 cm² surface extremely efficient. That’s why the RV 10 digital delivers reliable and reproducible process results that are usually reserved for more costly systems. Additional features such as smooth start, left-right interval or timer function capability support the user in their daily lab work. Another important aspect of the RV 10 digital are the sophisticated safety features. The motorized lift has an automated lift-out function in case of power outage to prevent superheating of the solvent. Safety temperature circuits can be set individually. Dry-run protection, adjustable lower end stop and lock function of bath setting complete the line of safety features. Furthermore, IKA offers a choice of coated glassware for increased safety needs. The RS 232 interface allows for remote control via IKAs “labworldsoft”. The Heating bath is controlled via the IR interface from the main unit. INCLUDED The IKA RV 10 Digital Rotary Evaporator w/ Coated Dry Ice Condenser includes: - RV 10 digital - HB digital S099 Heating Bath - RV 10.4 Dry Ice Condenser Coated Glassware - RV 3.4 Woulff bottle - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 3 Year Warranty Extension with IKA Registration) IKA RV 10 Digital Rotary Evaporator w/ Coated Dry Ice Condenser Specifications Type of coolingverticalCooling surface1500 cm2Motor principleDCSpeed range5 - 280 rpmReversible direction of rotationyesLift MotorStroke 140 mmHeating temperature rangeroom temp. - 180 °CHeat output 1300 WSet temperature resolution1 ±KFilling volume max.3 lTimeryesDimensions (W x H x D)500 x 430 x 440 mmWeight20 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 20RS 232 interfaceyesVoltage220 - 240 / 115 / 100 - 240 / 100 - 120 / 100 - 115 VFrequency50/60 HzPower input1400 WComparison of ModelsSpecificationIKA RV 10 Digital Rotary Evaporator w/ Coated Dry Ice CondenserIKA RV 3 Rotary Evaporator w/ Coated Dry Ice CondenserIKA RV 8 Rotary Evaporator w/ Coated Dry Ice CondenserCooling Surface1500 cm²1500 cm²620 cm²Speed Range5 - 280 rpm20 - 300 rpm5 - 300 rpmLiftMotorManualManualStroke140 mm150 mm120 mmHeating Temperature RangeRoom Temp. - 180 °CRoom Temp. - 99 °CRoom Temp. - 180 °CHeat Output1300 WN/A1400 WFilling Volume Max.3 L4 L4 LTimerYesN/AN/ADimensions (W x H x D)500 x 430 x 440 mm440 x 530 x 330 mm510 x 490 x 345 mmVoltage220 - 240 / 115 / 100 - 240 / 100 - 120 / 100 - 115 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(2) { background-color: #fffacd; }

Hirayama HICLAVE HVE-50 Economical Floor-Standing Autoclave, 50L, 120V Chamber Volume 50L Sterilizat (more)ion Temperature Range 105°C to 135°C Chamber Dimensions 11.8 x 28 in. (30 x 71 cm) Features - Space-saving design with lid opening upward - Agar sterilization mode for sterilizing agar and then automatically maintaining it at liquid temperature - Dual-sensing lid interlock prevents lid opening when chamber is pressurized or when temperature exceeds 97°C - Agar melting mode for melting agar and maintaining it at liquid temperature, or for a hot, faster start-up - One-touch lever to easily open and close chamber lid - In-process display shows the status and the progress of sterilization cycle - Door-closure sensor provides a prompt and the cycle will not start unless the door is closed properly The Hirayama HICLAVE HVE-50 Economical Floor-Standing Autoclave, 50L, 120V is a self-contained, portable, floor model mounted on casters. It does not need plumbing for installation, it occupies minimum floor space, operates at 120V, and can be placed conveniently in many locations in the laboratory. Its uses include the sterilization of agar, media, waste, and glassware. The HVE-50 can accommodate a 10-liter fermenter, a 15-liter carboy a 19” x 24” biohazard bag, nine 1-liter flasks, one hundred and eighty 20-mm tubes, or two hundred and seventy 13- mm tubes in three stacking baskets. INCLUDED: The Hirayama HICLAVE HVE-50 Economical Floor-Standing Autoclave, 50L, 120V includes: - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty