Bellingham + Stanley Eclipse Refractometer 45-80 degrees Brix

BRIX REFRACTOMETER - For food and beverages Ideal for fast and automatic sugar determination of almo (more)st all food and beverage samples. It can be used both in laboratories, for quality control, and on agricultural fields, vineyards, orchards or near the production line. Designed with a full Brix range (0.0 to 95.0°Brix). Fields of use MyBrix can be used to determine the optimal harvest time of fruits and vegetables, to carry out incoming goods controls, or for quality control in juice, wine, soft drinks and food production. Measurements in seconds and accurate MyBrix measures the refractive index and sugar content instantly and precisely: the results are processed in just 2 seconds in the desired scale. Results are subject to automatic temperature compensation and are converted to up to 3 of 10 built-in sugar content scales, including Brix, Oechsle, Baumé and more. Extremely compact The MyBrix pocket refractometer is compact, lightweight and designed to fit comfortably in the hand and withstand rain and humid environments. Resistant and solid With its weather resistant design (IP65 rating) and rubber covered keyboard, MyBrix is ​​ideal for measurements in the field and close to the production line. TECHNICAL FEATURES

BELLINGHAM + STANLEY Automatic Refractometer RFM840 Model: RFM 840 - 26-840 - benchtop refractometer (more) Series: RFM 800 RI scales: 1.32 - 1.58 Sugar (°Brix): 0-100 RI Resolution: 0.00001 Resolution °Brix: 0.01 Presser type: Polyacetyl Other scales: Zeiss, Oechsle (CH) & (D), Babo (KMW), Baumé, Probable Alcohol (A.P.), Sodium Chloride (NaCl), HFCS (42, 55 & 90%), Butyro among others from the instrument library Measuring temperature range: Lower limit: 0°C or 10°C below ambient temperature, whichever is higher Upper limit: approximately 100°C Temperature sensor accuracy ±0.03°C Temperature stability ± 0.05 °C Delivered without standard solution

0

Measuring range: Urine S.G. 1,000 ~ 1,050

As-is

RFM 340 refractometer Scale Refractive Index (RI): 1.33 – 1.54 Scale Sugar °Brix: 0 – 95 Resolution  (more)RI: 0.0001/0.00001 Resolution Sugar °Brix: 0.1/0.01 Accuracy RI: ±0.00003 Accuracy Sugar °Brix: 0.02 Lab circulating refrigerated water bath Temperature range: -20 to 200°C Temperature stability: ±0.03°C Pump capacity: 16 L/min Capacity: 7 litres

Labconco FreeZone 6L -84C Console Freeze Dryer with stainless steel coil and collector, Purge Valve  (more)Features - Patented moisture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. A variety of FreeZone Freeze Dryer accessories are available including Shell Freezers, Tray Dryers, Drying Chambers and Product Shelves. Memory to store30 programs with 16 segments each including number of steps,ramp rate, shelf temperature, hold time and vacuum level FreeZone 6 Liter Console Freeze Dryers are designed forlyophilizing moderate to large samples loads or numerous small containerbatches. The console features a front viewing window, interior space for avacuum pump, and accommodation for a large tray dryers such as the FreeZoneStoppering Tray Dryer (pump and tray dryer sold separately). These models offera broad range of built-in options including a purge valve and mini chamber. Theupright stainless steel collector coil holds 6 liters of ice before defrosting.Two 1/3 hp HCFC/CFC-free refrigeration systems cool the collector to -84C(-119F), suitable for low eutectic point samples including acetonitrile.Lyo-Works™ OS provides a real time display of collector temperature, vacuumlevel and optional End-Zone™ end point detection system, shown on a 5"full color, capacitive touch screen. Models with PTFE-coated collectors thatcan withstand corrosive compounds are available.Features Upright stainless steel collector coil holds 6 liters of ice before defrosting -84C (for low eutectic point samples including acetonitrile) collector Environmentally-friendly HCFC/CFC-free refrigeration system Lyo-Works OS provides a real time display of collector temperature and vacuum level Optional End-Zone™ end point detection for flask freeze drying One-touch data logging and display provides information to maximize sample quality and minimize run time FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run. INCLUDED: The Labconco 710611100 FreeZone 6L -84C Console Freeze Dryer with stainless steel coil and collector, Purge Valve 115V, 60Hz includes: - Vacuum Hose - Drain Hose - Hose Clamp x 2 - Baffle - Power Cord - Operator's Guide - Manufacturer's Documenation - 1 Year Manufacturer's Warranty

Hermle Z496-1L-A500S 500ml Flat Bottle, 69.5mm Dia Insert for Z496-1000-1L, 2/pk The Hermle Z496-1L- (more)A500S 500ml Flat Bottle, 69.5mm Dia Insert for Z496-1000-1L, 2/pk is for use with the Z496-1000-AC Swing Out Rotor and includes two 500ml adapters. INCLUDED: The Hermle Z496-1L-A500S 500ml Flat Bottle, 69.5mm Dia Insert for Z496-1000-1L, 2/pk includes: - 1 x 500ml Flat Bottle Adapters, 2 per pack - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Branson CPX2800H Digital Ultrasonic CleanerFeatures - Sweep frequency eliminates standing waves and  (more)creates consistent cavitation throughout the tank. - 40 kHz rugged industrial transducers. - 99-minute digital timer and continuous ultrasonic operation. - Can be heated up to 69°C/156.2°F and set for either Fahrenheit or Celsius. - Last stored parameters are recalled when unit is turned back on. The fully digital control screen allows the user to quickly and effortlessly select control settings, power level, and ultrasonic duration. Bransonic baths completely remove flux and contaminants from such precision parts as PC boards, SMDs, quartz crystals, capacitors, and many others. Branson ultrasonic cleaners can also be used in laboratory applications for cell separation, cell lysing, mixing, emulsifying, sample preparation, and degassing of liquids. Bransonic CPXH heated ultrasonic baths are the most technologically advanced ultrasonic baths available. With programmable features, digital operation with power tracking capabilities to adjust for light or heavy loads, high/low power control, and degassing, the CPXH is the most versatile system available. The CPXH baths offer the following features: - Sweep frequency eliminates standing waves and creates consistent cavitation throughout the tank. - 40 kHz rugged industrial transducers. - 99-minute digital timer and continuous ultrasonic operation. - Can be heated up to 69°C/156.2°F and set for either Fahrenheit or Celsius. - Last stored parameters are recalled when unit is turned back on. The CPXH degassing period can be set up to 99 minutes. Extended degas time periods allow for “beyond cleaning” applications such as sample preparation, which includes degassing liquids, mixing and homogenization, dissolving solids, cell lysing, and dispersion of particles. Constant activity/power tracking automatically maintains the same ultrasonic power by adjusting for changes in liquid level and temperature caused by a light or heavy load. This helps ensure more uniform cleaning and consistent performance, even with multiple users or when bath conditions change. Consult with your Branson representative about the Bransonic accessories and solution best suited for your application needs. Visit us at www.Bransonic.com Bransonic® CPXH Ultrasonic Baths The CPXH Series is completely programmable. Once the process is entered into the controller, the end user only has to start the program and they are free to leave the unit on its own to do the job. The programmable process allows the process engineer to choose the temperature set point at which the degassing and ultrasonic time periods are triggered to begin. Once the CPXH ultrasonic run time period is reached, the unit shuts off, delivering the same results – every time. When the process temperature reaches the programmable set point, the ultrasonic cycle begins. This includes selectable times for both degas and ultrasonic processing. When cleaning delicate parts, the CPXH allows the user to lower the amplitude of the acoustic energy in the bath: 100% power to the tank for normal applications, 70% power for delicate applications. Manipulating the output waveform in this manner greatly helps to avoid damage to the components in the bath during the ultrasonic process. Click Here to View Product Video INCLUDED: The Branson CPX2800H Digital Ultrasonic Cleaner includes: - Tank Cover - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

You can start a measurement or calibration with just one push of a button. The menu settings are int (more)uitive and consist of complete sentences in 12 languages. Read all relevant data at a glance, thanks to the 4.3″ color display with large numbers and clear icons. Increase the productivity of your instrument by connecting peripherals such as a printer, PC, USB stick and barcode reader. Parameter: Conductivity Channel: Single Channel Conductivity measurement range: 0.001 μS/cm to 1000 mS/cm Conductivity resolution: 0.001 to 1 Conductivity accuracy: ±0.5% Ease of Use: Multilingual Menu, Calibration Support Security & Compliance: Password Protection, GLP, User Management Memory size: 1,000 measurements Data transfer: PC, Printer, USB stick Flexibility and modularity: Stirrer, Barcode Scanner Protection class: Waterproof and dustproof (IP54) Compatible with Intelligent Sensor Management (ISM): Yes

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW