Millipore Guava EasyCyte 8HT Flow Cytometer Lab Spares/Repairs NOTE - THIS IS A SPARES/REPAIRS ITEM

This Becton Dickinson High Throughput Sampler was removed from a university lab where it was surplus (more) to requirements. The unit is in good used cosmetic condition but it does have various marks and signs of use. The unit powers up fine but we were unable to test it further at our facility. We used a stepdown and tested it at 100v as that's what it would receive when powered inside a FACS unit. The PSU does state 100-240v though, so it will possibly run at 240v. It comes with a PSU, Comm cable and Sheath/Waste pipes.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Packard 500TR Series Flow Scintillation Analyser was removed from a university lab where it was (more) surplus to requirements. The unit Powers on and is currently running 515TR BIOS version 3.11. We were unable to test it further. It is in good cosmetic condition with only minor marks from use. Included with it are; 1x 500TR reference manual1x Floppy master disc FLO-ONE for windows Ver 3.651x External control cable1x 24bit external control cable1x FSA Pump retro fit kit1x FSA 500TR Narrowbore pump Cal Instructions2x Serial cables1x Misc control cable1x Flow cell LQTR 500 ul1x Flow cell NBLQ 99 ul1x Bag part of flow splitter 77000211x Bag of Homogenous option kit 7601621

Rheodyne Labpro PR500-104-02 HPLC 6-Position 6-Port Switching Valve Column This was removed from a u (more)niversity lab where it was surplus to requirements. The item is in a reasonable, used cosmetic condition but is unable to be tested.

This listing is for a Drager Accuro Gas Detector Pump.The unit is in full working condition and is r (more)eady for immediate release.The Drager Accuro Gas Detector Pump is a robust and versatile manually operated bellows pump, tailored for effective gas detection in challenging environments.Key Features:Manual Operation:Designed for manual use, this pump requires no external power supply, making it ideal for potentially explosive atmospheres where electrical equipment may pose a risk.One-Handed Operation:Its ergonomic design allows users to operate the pump with one hand, facilitating gas detection in confined or hard-to-reach spaces, such as narrow pipelines or cramped industrial areas.Calibrated 100 mL Sample:The pump accurately draws a 100 mL sample through the gas detection tube, ensuring precise measurements for a wide range of gases.Pressure-Controlled End of Stroke Indication:This feature provides a clear signal when the sample has been drawn, enhancing user confidence that the measurement is complete and accurate.Compatibility:The pump is compatible with over 500 different short-term gas detection tubes, offering extensive versatility across various applications.Benefits:Fast Measurement:Users can perform gas measurements quickly, which is critical in time-sensitive situations such as emergency response or environmental monitoring.Reliable Measurements:The design ensures dependable operation, even in difficult-to-access locations, making it suitable for a range of industries, including manufacturing, construction, and environmental science.Cost-Effective:The manual operation and compatibility with numerous gas detection tubes provide a budget-friendly solution for regular gas monitoring without needing elaborate electronic equipment.Easy to Use:Minimal training is required to operate the pump, making it accessible to a broader range of users and reducing downtime.Applications:Industrial Safety: Ideal for monitoring gas levels in manufacturing plants, warehouses, and construction sites.Environmental Monitoring: Useful for assessing air quality in potentially hazardous or remote locations.Emergency Response: Essential for first responders evaluating hazardous gas situations in emergencies.

Temperature range: 3°C to 16°C Maximum fluctuation: 3.6 °C Maximum gradient: 4.1 °C Defrosting syste (more)m: Automatic defrosting system Cooling system: Dynamic Capacity: 344 L Dimensions (HxWxD): 1840 x 597 x 615 mm Internal dimensions (HxWxD): 1635 x 440 x 435 mm Weight: 65 kg

The Qubit fluorometer uses the very latest in illumination and detection technology for the highest  (more)sensitivity, you can use as little as 1 µL of sample and still get great results, even with very dilute samples. Dynamic range: 5 orders of magnitude Light sources: Blue LED (max ~460 nm), Red LED (max ~635 nm) Excitation filters: Blue 400 – 490 nm, Red 570 – 645 nm Emission filters: Green 510 – 580 nm, Red 655 – 725 nm Photodiode detectors: 300 – 1000 nm Calibration: 2 or 3 point standard Tube type: 500 µL clear tubes Warm up time: 2 sec Dimensions: 114 x 166 x 46 mm Weight: 219 g

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

IKA VACSTAR control Final pressure without gas ballast 2 mbar Pump rate max. (50/60Hz) 22 l/min Inpu (more)t pressure 2 - 1030 mbar Features - Powerful 4-chamber membrane vacuum pump, chemical-resistant and low-maintenance - Integrated vacuum controller with a detachable WiCo controller for versatile operation - Selection of operating modes from automatic to manual, including pumping, evacuation, and cleaning functions - High suction performance at 22 l/min with a minimum pressure of 2 mbar - Achieves a final pressure of 2 mbar without gas ballast, featuring 4 suction levels - Boiling point detection and a comprehensive solvent library for specific applications - Features a venting valve, condensate trap, and emission condenser for enhanced safety - Timer function for scheduled operations with a noise level of 54 dB(A) at low pressure Separation, filtration, removal: The VACSTAR dry 4-chamber membrane vacuum pump is powerful, resistant to chemicals and low-maintenance. VACSTAR control is the ideal system with its integrated vacuum controller and removable display. The controller offers a suitable mode for the desired process: from automatic to manual operation, right through to pumping or an evacuation and cleaning function. Integrated vacuum controller with removable controller (WiCo): Depending on the application, you can easily select your operating mode either by using the intuitive operator menu or by remote control.For additional safety for users and environment, we recommend using the VSE 1 vacuum safety emission condenser, which prevents solvents from being released into the room air. The VSE 1 is available as accessory. INCLUDED: The IKA VACSTAR control includes: - WiCo VACSTAR control - Vacuum hose (1 m) - WH11 - OS 1.0 WiCo power supply unit - USB Cable - USB A to Micro-B, 2 m - USB A-B Cable - Screw driver - Manufacturer's Documentation - 2 Year Manufacturer's Warranty