Avantes HortiSpec+ Spectrometer System

Sciex Photospray  Assy no. 028825 for Mass Spectrometer This was removed from a university lab  (more)where it was surplus to requirements. It is in good cosmetic condition but has not been tested. Sciex PhotosprayAssy no. 028825SN - 481020509 Connected to Sciex Assy no. 029030SN - 014020509

Bruker MicrOTOF-Q II Mass Spectrometer This item was removed from a university lab where it was surp (more)lus to requirements. The unit is in excellent cosmetic condition and powers on. The previous owner has reported it to be in working condition. However, no PC or software is included. Model: QT 0201 G 003Serial No.: 228888.10331Year: 2011

This Thermo Spectronic Genesys 10 VIS UV/VIS Spectrometer was removed from a university lab where it (more) was surplus to requirements. This item powers on and is in good cosmetic condition, it has not been tested further. Lamp hours: 492.06

Perkin Elmer LS 55 Luminescence Spectrometer This was removed from a university lab where it was sur (more)plus to requirements. The unit powers up and is in good cosmetic condition with marks from use. The lab reported that it was in good working order prior to removal, but we were unable to test it further at our facility.

Perkin Elmer LS 55 Luminescence Spectrometer This was removed from a university lab where it was sur (more)plus to requirements. The unit powers up and is in good cosmetic condition with marks from use.

Thermo Elemental X Series ICP-MS Mass Spectrometer w/ Software & Accessories This was removed fr (more)om a university lab where it was surplus to requirements. The unit powers up but we were unable to test it further at our facility. We are told it was working when it was last used in 2020. It is in good cosmetic condition with minor marks. Included with it are; Original software on CD-ROM X Series PlasmaLab 2.6 ICP-MS softwareSeveral manuals, safety, performance and maintenance schedule, pre-installation and operationNew and used spare skimmer and sampler conesSpare electron multipliernew and used spare printed circuit boardsVarious tubing and connectorsPacket of various Thermo O ringsMany other unidentified small parts in sealed packaging

Manufacturer: Secomam Model: UVIKON XS UV/Vis Spectrophotometer 190-1100 nm (without Software) P/N:  (more)70/ 99-9028 Description: The UVIKON Simplicity Concept represents the first Spectrophotometer Series featuring Advanced Digital Signal Processing Technology. ADSP ensures reliable data acquisition, a superb sensitivity level to allow linear measurements even at high OD values, and a very low instrument noise. Uvikon XS in combination with the easy to use Windows compatible LabPower Junior software package supports the entire range of daily routine applications. Features: - 100% symmetric true double beam technology for high data precision and stability- Total and easy access: front top and back covers are quickly removable- Three point positioning of accessories for high reproducibility of results- Quartz windows at the beam entrance and exit to the sample compartment prevent the optics from being contaminated- Well proven true symmetric double beam optics with only 6 reflecting surfaces per beam- High-Energy diffraction Zeiss™ Monochromator Design using a holographic blazed grating with 1300 lines per mm- Very sensitive photodiode with a rotating all-reflective chopper mirror providing 100% energy in sample and reference beams plus dark current correction to achieve reliable data even in concentrated samples- External source bench providing thermal insulation with optical bench and isolation of the whole photometric assembly against contamination by ozone emitted by deuterium lamp- Optical bench base manufactured to a tolerance of 0.01 mm in 1 meter- Complete optical system sealed against atmospheric contamination from dust and volatile compounds Specifications : - Range: 190-1100 nm- Fixed 1.8 nm bandwidth- Dimensions: 120 x 80 x 53 mm- Weight: 50 Kg Items delivered: - Secomam UVIKON XS UV/Vis Spectrophotometer 190-1100 nm (without Software)- Instruction Manual as PDF via E-Mail Condition: This item is in very good cosmetic condition, it is fully functional but needs software to be operated.

SET of Components for Optical INFRARED Scanning System Manuf.: IMAGE GUIDED TECHNOLOGIES , Boulder / (more) USA consisting of: infrared transmitter P/N 141273.....S/N 372767 ... with Power Supply 230 VAC /  12 VDCinfrared optical scanner , MODEL No: 144843, S/N 462868 with 16 PIN LEMO Socket  for I/O signalsmarker tool interface ........MODEL No.: 116649 S/N 464086 with 4 inputs ( 8 PIN  LEMO - A..B..C..D.. ) for 4 active marker toolswith 37 PIN Connector and 8 m Cable with 37 PIN Connectorscable , 10 m long ; P/N 119373 REV D, SCT 44948; with 2 LEMO Connectors 16 PINactive marker tool , cable-less, for CR-2 Li Batterie ; P/N 148661;active marker tool , cable-less ;for CR-2 Li Batterie ; P/N 145402 , S/N 454436active marker tool with cable and 8 PIN LEMO connector, P/N 138383active marker tool with cable and 8 PIN LEMO connector, P/N 138370 all components are in excellent cosmetic codition, out of operation in GERMAN  GOV LAB and functional; we sell this components here for Buyers who want to extend their IGT System

Eppendorf Centrifuge Swing Buckets S-4x750 max 1000g 4900rpm These were removed from a university l (more)ab where they were surplus to requirements. 4x Eppendorf Centrifuge Swing Buckets S-4x750M/N: NL017Date: 03/13Max RPM: 4800 These are in good cosmetic condition on the outside, but are slightly corroded and pitted on the inside. They have not been tested.

Memmert ICH750 Stability Climate Chamber 749L, 115V Temperature Range -10°C to 60°C w/o Humidity (+ (more)10°C to 60°C w/ Humidity) Humidity Control 10 to 80% RH Chamber Volume 749L (26.5 cu. ft.) Features - Superior temperature and humidity homogeneity for reliable stability testing - Complies with international standards like ICH, WHO, EMA, ASEAN, GMP, GLP, GCCP - Active humidification and dehumidification system for precise control - Large-area air jacket on four sides ensures effective thermal transfer - Hermetically sealed interior for efficient water usage once setpoints are reached - Dual high-grade platinum temperature sensors with mutual monitoring for continuous operation - Double doors with wide-area interior glass to prevent contamination and temperature fluctuations - Intuitive operation with Memmert ControlCOCKPIT and AtmoCONTROL software - Constructed from high-quality, corrosion-resistant stainless steel - Integrated data logger and multiple interfaces for advanced programming and documentation options - Condensation-free operation within specified temperature-humidity ranges - Programmable temperature and humidity ramps via AtmoCONTROL software The Memmert ICH750 Stability Climate Chamber 749L, 115V sets the standard for stability testing, excelling with its precise control of both temperature and humidity, essential for rigorous testing standards such as ICH, WHO, EMA, ASEAN, GMP, GLP, and GCCP. This climate chamber offers a temperature range of -10°C to 60°C without humidity and +10°C to 60°C with humidity, alongside a humidity control range of 10 to 80% RH. Its exceptional temperature and humidity homogeneity is achieved through a large-area air jacket on all four sides and a digitally controlled active humidification and dehumidification system. A notable feature of the ICH750 is its double-door design, which includes a wide-area interior glass door to prevent contamination and maintain temperature stability while providing clear visibility of the chamber's contents. The chamber's interior is hermetically sealed, ensuring efficient water use once the desired setpoints are reached, provided the door remains closed. Additionally, the chamber is equipped with two high-grade platinum temperature sensors with mutual monitoring to ensure uninterrupted, reliable operation even if one sensor fails. Operation is made simple with the Memmert ControlCOCKPIT and AtmoCONTROL software, which allow for intuitive navigation and easy programming of temperature and humidity ramps. The ICH750 is almost exclusively made from high-quality, corrosion-resistant stainless steel, making it both durable and easy to clean. A wide range of programming and documentation options are available through its interfaces, integrated data logger, and software, ensuring that this climate chamber is not only robust but also adaptable to various scientific and industrial applications. INCLUDED: TheMemmert ICH750 Stability Climate Chamber 749L, 115V includes: - 2 x Stainless Steel Wire Shelves - Water Tank w/ Connection Hose - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

If you buy a WPY Multifunctional Scale by July 31, 2024, you will receive each of these products alo (more)ng with a FREE lifetime license for the Workflow Module. Multifunctional scales WPY series is designed for fast and precise determining mass of weighed objects in industrial conditions and with application of a modern terminal PUE7 series. Application The device features simple structure and enables maximum automation of carried out weighing processes. Apart from standard weighing mode, the WPY series additionally allows for parts counting, labelling and formula making processes. The universal software implemented in the terminal enables scales cooperation with barcode scanners, receipt printers, label printers, RFID scanners and PC peripherals (including mouse, keyboard and external data storage devices) all connectable to built-in interfaces RS232, USB and Ethernet. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. Design and functionality The WPY series features a stainless steel weighing platform and a terminal comprising both, 5,7” TFT colourful touch screen display and a membrane keyboard. The system is ready to connect an additional weighing platform, and provides below functions: programming of display and functional keys, programming of infrared proximity sensors, designing printouts, designing text data that is displayed on terminal display. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface. Software functionality: available working modes: weighing, parts counting, percent setup, formulation, density determination, animal weighing; generating standard labels for matching single goods; generating C labels for matching cumulative containers; generating CC labels for matching containers with cumulative containers; three means of triggering a C and CC label printout: - manually, - by counter status, - by set mass value of a product; control scales mode (+/- control of measurement result); product identification using EAN-13 and EAN-128 codes; access to databases of operators, products, raw materials, clients, weighing records, universal variables and tares. The multifunctional WPY series enables quick searching of a product by means of a connected barcode scanner. This option considerably increases functionality of the system. The terminal enables cooperation with a computer software "LABEL EDITOR", and the software communicates with the scales either through RS 232 interface or through ETHERNET. Scale WPY series is available in dual range (non-verified) version on surchage. Dual and single range scales in non-verified version are named as: scale model/NL, e.g. WPY 150/C2/R/NL.

Benchmark MiniMixer 3D Nutating Shaker The Benchmark MiniMixer 3D multi-functional shakers provides  (more)a 3-dimensional “nutating” motion for thorough, foam-free mixing in blood and centrifuge tubes, as well as in a variety of flat vessels. The MiniMixer comes standard with an autoclavable dimpled mat while optional flat mats are also available for mixing other vessel types. Stacking platforms can be purchased as accessories, effectively doubling the usable surface area of each model. Even the smallest single platform configuration has 24% more platform work surface than traditional nutating mixers. These mixers feature maintenance free, brushless motors capable of loads up to 2kg and are safe for use in cold rooms and incubators. INCLUDED: The Benchmark MiniMixer 3D Nutating Shaker includes: - 10 x 7.5 inch Dimpled Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty