Agilent 6460C QQQ LCMS w/ 1260/1290 infinity HPLC

Shimadzu Axima Confidence MALDI TOF2 High Energy Mass Spectrometer This item was removed from a univ (more)ersity laboratory where it was surplus to requirements. The mass spectrometer is in excellent cosmetic condition and powers on. No further testing was conducted due to the absence of software. The previous client has stated it requires a new ion gate for full functionality. Therefore, it is listed as Spares/Repair. Specifications:- Model: Axima Confidence MALDI TOF2 - Serial No.: 60553/09 - Year: 2013 Included:- 3 x Data Cables Manuals:- 2 x Axima Target Plate User Guides - Shimadzu Site Preparation Document - Kratos Analytical Launchpad Notes 2.9.3 - Axima Customer Support Guide (Aximas with Nitrogen Laser) - Axima Confidence Installation Document

Finnigan MAT GCQ Mass Spectrometer Gas Chromograph GC-MS System This was removed from a university l (more)ab where it was surplus to requirements. The Mass Spectrometer powered on with the cooling fan operating and lights illuminating on the front panel. It is in good cosmetic condition with minor marks from use. Finnigan MAT GCQ Mass SpectrometerSerial No. 200295

Bruker Ultraflex TOF/TOF Mass Spectrometer This was removed from a university lab where it was surp (more)lus to requirements. The unit powers up but has not been tested further at our facility. The unit has some faults as confirmed by the lab On arrival system was in fault mode with 'laser interlock' error. Restarted the laser through marathon control and tested. The laser started to fire but then the high voltage switched off. Tested HV supplies and found that the ISS could only reach 19kv instead of the required 25kv. Suddenly the system started working again and peaks were seen on the sample BUT the system has 2 issues that are intermittent. 1. 30kv supply 2. Laser

Waters Micromass Q-Tof micro Mass Spectrometer This was removed from a university lab where it was s (more)urplus to requirements. The unit powers up but has not been tested further. We have been advised that it will require flushing out before it can be used. It is in good cosmetic condition with minor marks.

Sequenom Agena MassARRAY Analyzer 4 System RS1000, PHX-1 & Accessories This was removed from a  (more)university lab where it was surplus to requirements. The system powers up and everything communicates but we were unable to test it further at our facility. The touchscreen on the nanodispense does not work, but we have replaced it with a monitor, mouse and keyboard. There is also a complete peripheral setup provided for the inbuilt PC in the PHX-1 system. Included in the system are; Sequenom Agena MassARRAY Analyzer 4 PHX-1Model: PHX-1Serial#: PX10060104 Sequenom Agena MassARRAY Nanodispenser RS1000Model: RS1000Serial#: 10P0413RS-01 The system also includes the following: Windows XP Software DiscNI Vision Deployment Engine for One UserMassARRAY Nanodispenser RS-1000 User's Guide v1.2.1WebPAM Software DiscFastTrak TX2300/TX4300 Quick Start GuideVarious Replacement parts (shown at end of slide)Various Plates for plate reader.

Hiden Isochema Intelligent Gravimetric Analist+ DSMS Mass spec This system was removed from a univer (more)sity where it was surplus to requirement. All units power up and are in good cosmetic condition, we are unable to test the system further at our facility. The lab confirmed the system was working prior to removal. The system includes the following: Hiden Gravimetric Gas sorption analyserSN - HALIGA157Powers on, PC has MASsoft Professional Software installed. Hiden Analytical DSMS Dynamic Sampling Mass SpectrometerModel - HAS-301-414 PLSN/Ref - WR 12971 Hiden Analytical HAL301/3FSN - 3F2R-0/A/81447/E Edwards 1.5 PumpModel - E2M1.5Code - A371-32-919SN - 086277133 Vacuubrand Diaphragm Vacuum PumpModel - MD1SN - 31507705 Hiden Analytical Furnace Power ControllerPowers on Parts fitted:Hiden Analytical Model - HAS037001SN - 314001 Hiden Analytical Model - HA-092-0010SN - 310-003 Pfeiffer VacuumModel - TC600SN - 0829014257 Hiden Analytica Cryo Furnace Circulation UnitModel - HAS0221248SN - 314-001 Has 2 Vacuubrand Diaphragm Vacuum Pumps fitted and one spareModel - MD1 PC/Accessories:Dell Vostro 200Dell 19" Monitor & KeyboardIBM MouseAll Powers on Software discs:Hiden IGA Systems Software CD V2.148Hiden Analytical Software Suite v4.25Software USB - Has above software saved on usb Other accessories included:Blue case of screws & copper gaskets2 x Dilvac Dewar Flask & Containers 2 x 35cm1 x Dilvac Flask 12 x 23cmSmall Furnace - Model HAS0221267 - Unable to test Manuals:IGA Systems manualHiden Vacuum ManualsHiden MASsoft professional manual set

QIAGEN’s real-time PCR cycler, the Rotor-Gene Q, combines multiple optimized design features to prov (more)ide the outstanding performance and reliable results that your research demands. Together with optimized QIAGEN kits for real-time PCR, the Rotor-Gene Q enables streamlined analysis for a wide range of applications. Q-Rex Software is the new operating and analysis software for life science qPCR applications, with a plug-in concept that lets you add new functionality without affecting established workflows. A range of QIAGEN kits for the Rotor-Gene Q enables reliable quantification in all your real-time PCR applications without the need for optimization of reaction and cycling conditions. Kits for real-time PCR and HRM applications are available for: Gene expression analysis Pathogen detection DNA methylation analysis Genotyping and gene scanning miRNA research Channel: Blue Excitation: 365 ± 20 nm Detection: 460 ± 20 nm Examples of fluorophores detected: Marina Blue, Edans, Bothell Blue, Alexa Fluor 350, AMCA-X Channel: Green Excitation: 470 ± 10 nm Detection: 510 ± 5 nm Examples of fluorophores detected: FAM, SYBR Green I, Fluorescein, EvaGreen, Alexa Fluor 488 Channel: Yellow Excitation: 530 ± 5 nm Detection: 557 ± 5 nm Examples of fluorophores detected: JOE, VIC, HEX, TET, MAX, CAL Fluor Gold 540, Yakima Yellow Channel: Orange Excitation: 585 ± 5 nm Detection: 610 ± 5 nm Examples of fluorophores detected: ROX, CAL Fluor Red 610, Cy 3.5, Texas Red, Alexa Fluor 568 Channel: Red Excitation: 625 ± 5 nm Detection: 660 ± 10 nm Examples of fluorophores detected: Cy5, Quasar 670, LightCycler Red640, Alexa Fluor 633 Channel: Crimson Excitation: 680 ± 5 nm Detection: 712 high pass nm Examples of fluorophores detected: Quasar 705, LightCycler Red705, Alexa Fluor 680 Channel: HRM Excitation: 460 ± 20 nm Detection: 510 ± 5 nm Examples of fluorophores detected: SYBR Green I, SYTO9, LC Green, LC Green Plus+, EvaGreen Operating software is available. Analysis software must be purchased.

Automatic checkweigher DWT/RC/HYF series is dedicated to work on technological lines of food industr (more)y, where high humidity and frequent high pressure cleaning are the major issues. The construction has been designed to enable fast and easy cleaning. Special emphasis has been put on elimination of gaps, spaces and flat surfaces susceptible to condensates and waterstains. The structure of the conveyor belt allows washing it inside and outside without dissembling. The electronics has been placed high above the weighing platform for minimizing the possibility of inundation of the control panel. The checkweigher DWT/RC/HYF series is created in accordance with vertical space division. “Clean zone” ranges from the floor to the level of the conveyor belt (the area where food and production waste accumulates). “Technological zone” is placed above the production line. The control mechanism is based on a terminal HY series, facilitating easy communication between the operator and the machine and providing additional features. Standard functions: - Database of operators and products - RS 232/485 and Ethernet interfaces - I/O control - Current weighing statistics - Automatic printouts - Reports - Cooperation with computer software Additional functions: - Faulty goods discriminator - Barcode scanner - The checkweigher can be equipped with standard ink printers and labelling printers allowing to print the tags of the weighed products - Sounder and/or Warning tower lights - Cooperation with feeders, mounted to the front side, in a feedback system.

Measurement with application of 4 load cells is a guarantee of precise mass reading, regardless of l (more)oad positioning on the weighing platform. The platform scales C315.4 series is made of mild steel powder coated construction of the weighing platform. The platform comprises 4 load cells connected to an terminal PUE C315 series featuring backlit LCD display and 5 function buttons. The weighing platform and the terminal are connected through a long cable enabling hanging the terminal on a wall. The C315.4 series is available in pit version for easy placing heavy loads on the weighing platform without application of ramps. Scales is available in dual range version on surcharge.

Scale WPY for statistic control WPY/PGC is equipped with modules that put packed products control in (more)to practice. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after controlling pre-defined quantity of packages (samples). Number of the packages is fixed by scale program depending on product batch size. Scales are equipped with 5,7" colourful, graphic touch screen display for previewing information concerning currently performed control and its result. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for prepacked products control report. The report is automatically saved in scale memory and at the same time it can be printed by printer connected to scale. Scale coupling with computer program enables: keeping weighing records from successive weighments in the database, automatic printout of control processes from computer software level, sending user defined codes from scale to computer software; the codes match weighed product (product code, operator code, batch quantity, batch no., control Start/Stop), defining product codes and their descriptions (names) from the level of computer program, therefore user can assign an individual product name suitable for the company's branch. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).

The MW-01-A mass converter is designed to be a component of an industrial load cell scale. Depending (more) on the needs, communication with the mass converter can be carried out via the following communication interfaces: RS232, RS485, Ethernet, Ethernet IP, Profibus or Profinet. The MW-01-A mass converter is compatible with indicators and PC. Operation of the MW-01-A mass converter via PC is carried out using „MW Manager” software.

Ohaus Endeavor 5000 Series e-E51LD0420 AM Light Duty Orbital Shaker Speed Range 50 to 300 RPM Maximu (more)m Capacity 8.8 lb. (4 kg) Orbit 20 mm Features - Compatible for use in incubators and cold rooms, enhancing versatility across experimental conditions - Features a triple eccentric drive and maintenance-free brushless DC motor for stable, long-term shaking - Bright, backlit LCD display with easy-to-navigate menu for speed, time settings, and advanced features - Integrated safety mechanisms with overload and unbalanced detection to protect samples - Equipped with RS232 interface for two-way communication, enabling data logging and unit control - Durable construction with chemical-resistant polymer housing and sturdy aluminum tray - Small footprint design with visual and audio alarms, and advanced microprocessor control for gradual speed increase to avoid splashing Click Here to View Product Video The Ohaus Endeavor 5000 Series Light Duty Orbital Shakers are a trusted choice for everyday laboratory shaking needs, designed to accommodate a wide range of applications from microbiology and molecular biology to food science and chemistry. These shakers come in three models, featuring either a 3 mm orbit, a 20 mm orbit, or a specialized microplate configuration, ensuring versatility for various research requirements. Each model is compatible with use in incubators and cold rooms, highlighting their adaptability to different experimental conditions. The shakers boast a durable, chemical-resistant polymer housing and a sturdy aluminum tray with multiple attachment points for accessories, making them both robust and easy to clean. A key feature of the Endeavor series is its triple eccentric drive and maintenance-free brushless DC motor, providing stable and accurate shaking over long periods. Safety is enhanced with integrated overload and unbalanced detection systems to protect valuable samples. The series is equipped with a bright, backlit LCD display that shows speed and time settings, including a timer with both count-up and count-down functions that automatically shuts off shaking when time expires. An easy-to-navigate menu and simple knob control facilitate operation, while the inclusion of a tray with a non-slip rubber mat, flask clamps, and tube racks enhances its utility. An RS232 interface allows for two-way communication for comprehensive data logging and control, ensuring these shakers meet the demands of modern laboratories. Additionally, design features such as visual and audio alarms, a small footprint to conserve bench space, and advanced microprocessor control for gradual speed ramping further underscore the thoughtful engineering behind the Ohaus Endeavor 5000 Series. Optional accessories like a universal platform and over 20 flask clamps and tube racks are available, making these shakers a versatile and essential tool for a variety of scientific studies. INCLUDED: The Ohaus Endeavor 5000 Series e-E51LD0420 AM Light Duty Orbital Shaker includes: - 11.75 x 8.75 in. Non-Skid Rubber Mat Platform - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty