Waters 2996 Photodiode Array Detector

LITHIUMSAFE SAFETY CABINETS Certifications: EN 14470-1 EN 16121 The line of LITHIUMSAFE safety cabin (more)ets consists of innovative high quality products, built in Italy and specifically built for the safe storage of lithium batteries. These cabinets are designed according to current standards and can be equipped with numerous accessories for further levels of safety. COSTRUCTION Completely built in electro-galvanized steel sheet, cold pressed with removable external structure; thicknesses of 1/1.5/2 millimeters and painting with anti-acid epoxy powders and passage in a thermal tunnel at 200°C. Particular insulation on the panels for high temperatures (800°C): calcium silicate and mineral fiber (fibroceramic free) at high density 300 Kg/m3 fixed with ceramic adhesives. Fireproof melamine laminate panels with high resistance to even aggressive vapours. Certification according to EN 14470-1 and EN 16121 standards. CHARACTERISTICS - AUTOMATIC CLOSING of the door in the event of temperatures exceeding 47°C - LOCK AND LOCK OF THE DOORS WITH KEY - Certified automatic closing SYSTEM (70/100 °C) of the air inlet and outlet ducts, maintenance-free, placed on the back of the cabinet. - Ejection HOLE diam. 100mm. at the back of the wardrobe - Anti-spark hinge in natural iron with brass pin. - 1 shelf perforated at the base - 3 cm thermo expanding GASKET. (DIN 4102) - 'Earth' CLAMP to prevent electrostatic charges. Safety cabinet for lithium batteries CSF711/L LITHIUMSAFE CHEMISAFE, with accessories: 12-position electrical multiple socket; fire extinguisher with smoke detector.

LITHIUMSAFE SAFETY CABINETS Certifications: EN 14470-1 EN 16121 The line of LITHIUMSAFE safety cabin (more)ets consists of innovative high quality products, built in Italy and specifically built for the safe storage of lithium batteries. These cabinets are designed according to current standards and can be equipped with numerous accessories for further levels of safety. CONSTRUCTION - Completely built in electro-galvanized steel sheet, cold pressed with removable external structure; thicknesses of 1/1.5/2 millimeters and painting with anti-acid epoxy powders and passage in a thermal tunnel at 200°C. - Special insulation for high temperatures (800°C) with high density 300 Kg/m3 calcium silicate and mineral fiber panels (Fibroceramic free) fixed with ceramic adhesives. - Fireproof melamine laminate panels with high resistance to even aggressive vapours. Certification according to EN 14470-1 and EN 16121 standards. CARATTERISTICHE - AUTOMATIC CLOSING of the door in the event of temperatures exceeding 47°C - LOCK AND LOCK OF THE DOORS WITH KEY - Certified automatic closing SYSTEM (70/100 °C) of the air inlet and outlet ducts, maintenance-free, placed on the back of the cabinet. - Ejection HOLE diam. 100mm. at the back of the wardrobe - Anti-spark hinge in natural iron with brass plug. - 1 shelf perforated at the base - 3 cm thermo expanding GASKET. (DIN 4102) - 'Earth' CLAMP to prevent electrostatic charges AUTOMATIC FIRE EXTINGUISHER The automatic fire extinguishing system works by detecting the presence of fire and controlling the discharge of extinguishing media so that the damage caused by the fire is minimized. The automatic extinguishing system includes a fire detection system, an extinguishing control unit and condensed aerosol generators. Information on the front panel display facilitates programming and simplified use. The possibility of programming the delayed activation of the sirens, or the time and duration of the extinguishing system make the unit very efficient and flexible. HOW DOES IT WORK? In the event of a lithium battery fire, the automatic fire extinguisher suppresses the fire and neutralizes the decomposition products of the electrolyte such as Hydrogen fluoride (HF), forming stable products such as KF and KHF2. The neutralizing action prevents the formation of highly flammable gases, such as hydrogen (H2), bringing the internal temperature down below the threshold necessary for a new fire to break out. Constituent parts of the fire fighting system: - LPCB certified according to EN 12094-1 and EN54.2 and 4 - Fire detection and automatic extinguishing - Graphic display 128 x 64 pixels - Fire extinguisher button on front of unit - Key switch for switching off mode selection: manual only or manual and automatic - 3 siren outputs - Power supply with 3A - Low absorption at rest: only 40mA - Inputs and outputs for remote function control - Extinguishment stop button and extinguishing cancel button - Storing of data events - RS-485 for remote connection In the image the focus on the internal FBN fire extinguisher. Recommended accessories: - Charging points: 4x10 sockets. Contact us for more information.

LITHIUMSAFE SAFETY CABINETS Certifications: EN 14470-1 EN 16121 The line of LITHIUMSAFE safety cabin (more)ets consists of innovative high quality products, built in Italy and specifically built for the safe storage of lithium batteries. These cabinets are designed according to current standards and can be equipped with numerous accessories for further levels of safety. COSTRUCTION Completely built in electro-galvanized steel sheet, cold pressed with removable external structure; thicknesses of 1/1.5/2 millimeters and painting with anti-acid epoxy powders and passage in a thermal tunnel at 200°C. Particular insulation on the panels for high temperatures (800°C): calcium silicate and mineral fiber (fibroceramic free) at high density 300 Kg/m3 fixed with ceramic adhesives. Fireproof melamine laminate panels with high resistance to even aggressive vapours. Certification according to EN 14470-1 and EN 16121 standards. CHARACTERISTICS - AUTOMATIC CLOSING of the door in the event of temperatures exceeding 47°C - LOCK AND LOCK OF THE DOORS WITH KEY - Certified automatic closing SYSTEM (70/100 °C) of the air inlet and outlet ducts, maintenance-free, placed on the back of the cabinet. - Ejection HOLE diam. 100mm. at the back of the wardrobe - Anti-spark hinge in natural iron with brass pin. - 1 shelf perforated at the base - 3 cm thermo expanding GASKET. (DIN 4102) - 'Earth' CLAMP to prevent electrostatic charges. CHEMISAFE QUARANTINE SYSTEM Thanks to this patented system, in the event of a fire inside the safety cabinet, an automatic response will be activated to overturn the shelves, thus allowing the batteries to fall into a water tank located at the bottom. By immersion, the fire will be promptly extinguished and the potential risk of self-ignition will be effectively neutralised. Simple and very effective system! The cabinet is equipped with a water pump and algaecide. The QUARANTINE versions have only 3 shelves instead of the basic 4. Demonstration video of the QUARANTINE system.

DakoCytomation Diode Lyt 200-S Laser Head w/ Controller & Fan/Cooler This was removed from a wo (more)rking MoFlo system. It was surplus to requirements. The unit powers up but has not been tested further due to safety restrictions around lasers at our site. It is in good cosmetic condition with minor marks.

Newtek Tricaster TCXD455 Cs Multistandard Switcher And Control Surface This system was removed from  (more)a university lab where it was surplus to requirements. All units are in good cosmetic condition. The Newtek Tricaster TCXD455 Cs Multistandard Switcher and Keyboard power on and communicate successfully, there is no operating system installed as there is no HDD. For this reason, the control surface could not be tested.

Priorclave PS/QCS/SV100 Top Loading Autoclave This was removed from a university lab where it was su (more)rpus to requirements. The unit powers up but has only been partially tested as it requires a steam generator, which we do not have. It is in good cosmetic condition with minor marks.

CyBio CyBi Well Vario Pipetting Robot System - 96-Head & 384-Head This is being sold on behalf o (more)f a university lab. It is surplus to requirements. The unit is in excellent cosmetic condition. It has not been serviced or used for several years but was in good working order prior to this. It also has incorporated a small robotic arm that can pick up racks/plates and a capper/decapper for microtubes (FluidX or Matrix) with septum seals. We have installed a new HDD with Windows 7 on the PC.The CyBio Composer V2.10 software is included and also installed on the PC.The software will require setting up before use. The system includes the following: CyBio CyBi Well Vario Pipetting Robot System Right:-CyBi - Well vario 384/40OL3381 1 1011 Right Right Stacker - 0027 1 8014Right Left Stacker - 0027 1 8011 CyBi - Well vario 96/250OL3381 1 1010 Left:-Left Right Stacker - 0027 1 8006Left Left Stacker - 0027 1 8007 Comes on 2 x trepsa tablesTable dimensions - L180 W90 H84cm PC - Dell Precision T1650Comes with Dell 17" Monitor, keyboard & mouse Other parts incuded:- Fluid X Xdc-96proModel - HT112E/MISN - 40.165 4 x 6L Nalgene Water Containers Moxa UPort 1610-16 USB to 16 Port RS-232 Serial HubSN - TABF01136349 CyBio Power Supply0L3901 1 4003 CyBio Power Supply3402 5 8135 CyBio Expansion Module0026 4 4103 CyBio Expansion Module with 2 x easy-load MasterFlex 7518-000026 3 7210 CyBio Expansion Module with 2 x easy-load MasterFlex 7518-000026 3 7206 2 x Gilson Tube Rack holders Voyager Barcode Scanner 2 x Boxes of Eppendorf 384 PCR Plates (300 PER BOX)1 x Box CyBi TipTrays 384 - 25ul 6 x 4 Trays1 x Box CyBi - TipTrays 96 - 250ul 6 x 3 Trays Tables not included.

High Capacity HRP Platform Wherever high readability and precision are important. Wherever good repe (more)atability in harsh industrial conditions matters. High Capacity HRP Platforms are the ideal solution for any type of industry. Repeatability that cannot be repeated by others High Capacity HRP Platforms have a built-in internal adjustment system. Automatic internal adjustment guarantees the best quality of work and repeatability of results. You save time and avoid the inconvenience of manual adjustment. Unbreakable High Capacity HRP Platforms feature a modern electromagnetic mechanism design in a sealed steel housing and overload protection. The use of stainless steel for the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing. High Capacity HRP Platforms are distinguished by a high degree of protection IP 67. For an additional charge we will make HRP platforms in Ex version, but in order for the device to work in explosive areas, you need to supply the PUE HX5.EX terminal. Use the potential High Capacity HRP Platforms work with one of two weighing terminals: PUE 7.1 or PUE HY10. The terminals’ software enables you to archive your work results, ensures data safety, and allows the platforms to work with powerbanks from our offer. In turn, you will select appropriate antivibration tables for the platforms, and thus increase the readability of your measurements.

Motic PSM-1000E Trinocular Upright Industrial Microscope, Standard System Common Applicatoins Semic (more)onductor Analysis, and Laser Based Research Methods Optical System Specialized Lenses Design For NUV to Visible NIR Illumination Port for Fiber-Optic Coaxial Illumination Features - Ergonomic Design: The design of the PSM-1000 encourages the optimal amount of usability without sacrificing comfort. - Laser Work: The PSM-1000 is standard equipped for laser work covering the spectrums ranging from 355nm [UV] to 532nm [Green] to 1064nm [IR]. - Focusing Block: Rated for load weights up to 45lbs., image focal planes can be adjusted at 1μm resolutions within the total 50mm stroke. - Adjustable Nosepiece: Forward facing and equipped for four M26 x 1/36" (0.706) type objectives, the PSM-1000's nosepiece is dovetail mounted for molding to different types of research and usage. - Trinocular tilting head 3°-30° provides ease of use across a variety of applications. The PSM1000E is an OEM-ready instrument for the best images of flat, reflective specimens. Samples from metallurgy and the semiconductor field are treated by ELWD Plan Apochromatic objectives with a stupendous resolution power. The large FOV24 with an erect, true sided image allows fast orientation and manipulation work. INCLUDED: The Motic PSM-1000E Trinocular Upright Industrial Microscope, Standard System includes: - Adjustable Nosepiece - Widefield WF10X/24mm Eyepiece - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Jenesco FM-14 Ozone Generator The Jenesco FM-14 Ozone Generator is designed for use in commercial ap (more)plications or wherever high ozone output is needed to reduce odors, mold, mildew, bacteria and for decontamination. The FM14 produces maximum ozone output from ambient air using four silicone composite ozone plates with stainless steel grids. The FM14 has coverage of up to 6000 sq feet for odors, 1000 sq feet for mold. The ozone output is 4000 mgph (milligrams per hour) when used at normal air humidity of 60%. Electrical: 120VAC, 40W, 3A. Made in the USA.INCLUDED: The Jenesco FM-14 Ozone Generator includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty