Heidolph PCB Display (MR Hei-Tec / MR Hei-Connect)

This Powertecnique Uninterruptable Power Supply UPS ARGO 60/MM 0 & Battery Box was removed  (more)from a university lab where it was surplus to requirements. This was last serviced december 2019. We understand they were in use until at least 2021, but may have been offline for some time so it is possible the batteries have failed or do not perform well. The UPS powers up but was not tested further. Both units are in reasonably good cosmetic condition with some marks from use. Included are; 1 x Uninterruptable Power SupplyUPS ARGO 60/MM 0PN - UTO6060035D5 1 x Battery BoxBB 216-7PN - ACCMO606NI-01

LITHIUMSAFE SAFETY CABINETS Certifications: EN 14470-1 EN 16121 The line of LITHIUMSAFE safety cabin (more)ets consists of innovative high quality products, built in Italy and specifically built for the safe storage of lithium batteries. These cabinets are designed according to current standards and can be equipped with numerous accessories for further levels of safety. CONSTRUCTION - Completely built in electro-galvanized steel sheet, cold pressed with removable external structure; thicknesses of 1/1.5/2 millimeters and painting with anti-acid epoxy powders and passage in a thermal tunnel at 200°C. - Special insulation for high temperatures (800°C) with high density 300 Kg/m3 calcium silicate and mineral fiber panels (Fibroceramic free) fixed with ceramic adhesives. - Fireproof melamine laminate panels with high resistance to even aggressive vapours. Certification according to EN 14470-1 and EN 16121 standards. CARATTERISTICHE - AUTOMATIC CLOSING of the door in the event of temperatures exceeding 47°C - LOCK AND LOCK OF THE DOORS WITH KEY - Certified automatic closing SYSTEM (70/100 °C) of the air inlet and outlet ducts, maintenance-free, placed on the back of the cabinet. - Ejection HOLE diam. 100mm. at the back of the wardrobe - Anti-spark hinge in natural iron with brass plug. - 1 shelf perforated at the base - 3 cm thermo expanding GASKET. (DIN 4102) - 'Earth' CLAMP to prevent electrostatic charges AUTOMATIC FIRE EXTINGUISHER The automatic fire extinguishing system works by detecting the presence of fire and controlling the discharge of extinguishing media so that the damage caused by the fire is minimized. The automatic extinguishing system includes a fire detection system, an extinguishing control unit and condensed aerosol generators. Information on the front panel display facilitates programming and simplified use. The possibility of programming the delayed activation of the sirens, or the time and duration of the extinguishing system make the unit very efficient and flexible. HOW DOES IT WORK? In the event of a lithium battery fire, the automatic fire extinguisher suppresses the fire and neutralizes the decomposition products of the electrolyte such as Hydrogen fluoride (HF), forming stable products such as KF and KHF2. The neutralizing action prevents the formation of highly flammable gases, such as hydrogen (H2), bringing the internal temperature down below the threshold necessary for a new fire to break out. Constituent parts of the fire fighting system: - LPCB certified according to EN 12094-1 and EN54.2 and 4 - Fire detection and automatic extinguishing - Graphic display 128 x 64 pixels - Fire extinguisher button on front of unit - Key switch for switching off mode selection: manual only or manual and automatic - 3 siren outputs - Power supply with 3A - Low absorption at rest: only 40mA - Inputs and outputs for remote function control - Extinguishment stop button and extinguishing cancel button - Storing of data events - RS-485 for remote connection In the image the focus on the internal FBN fire extinguisher. Recommended accessories: - Charging points: 4x10 sockets. Contact us for more information.

HOW DOES 'QUARANTINE' WORK? 1 - A fire breaks out inside the safety cabinet. 2 - The automatic syste (more)m overturns the shelves and slides the batteries stored in the cabinet into a tub. 3 - Inside the water tank the batteries are placed in a sort of quarantine which will not only definitively extinguish the fire but also exclude the possibility of self-combustion. ACCESSORIES Electrical sockets are not standard. Contact us for your custom configuration.

This was removed from a university lab where it was surplus to requirements. The unit powers up but  (more)we were unable to test it further at our facility. It is in good cosmetic condition with some marks from use.

set of 2 digital timers 100 min IHM 0706CA - Counter / Down counter - Metal front New material in it (more)s original packaging Counter or Down counter Capacity: 99 min 59 sec per sec Alarm 1 min Sound level: 70 dB (at 1 m) When the sound level increases by 3 dB = the sound intensity (Watt / m2) is multiplied by 2. When the sound level increases by 10 dB = the sound intensity (Watt / m2) is multiplied by 10. Fast increment Programmed time memory Brushed aluminum front Kickstand / Wall mount / Magnet + adhesive metal plate On / Off button Screen: 47x20 mm / Digits: 17 mm D: 72x65x19 mm / 70 g

Hermle Z216 M Centrifuge w/ COMBI-RotorFeatures - Brushless induction drive - Microprocessor control (more) - Active imbalance detection and cut-off - Motor driven lid lock - Emergency lid lock - Air cooling - Diagnostic program - Program memory for 99 programs - Quick-key for short runs - 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration - Permanent indication of preset and actual values - Pre-selection of speed or RCF in steps of 50/10-er - Pre-selection of running time from 10 sec to 99h 59min or continious - Simple one handed opertaion Compact, quiet, and powerful are just a few of the features found on the Z216 series microcentrifuges. Add to this, the versatility of eight available rotor options, and the result is the ideal microcentrifuge for the modern molecular biology laboratory. All common microtubes (0.2ml, 0.5ml, 1.5ml, 2.0ml) can be accepted as well as PCR strips, hematocrit tubes, and even 5.0ml centrifuge tubes. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Despite a remarkably small footprint, the Z216 series offers a uniquely designed 44 x 1.5ml dual row rotor, nearly doubling the capacity when compared to traditional microcentrifuges. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z216 M Centrifuge w/ COMBI-Rotor includes: - COMBI-Rotor with Quick-Seal lid for 24 x 1.5/2.0ml and 4 x PCR strips - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Ohaus Guardian 3000 e-G31HSRDS Hotplate Stirrer, 115V The Ohaus Guardian 3000 Series Hotplate Stirre (more)rs are designed for economical heating and stirring in all laboratory settings. The bright LCD display includes easy-to-read temperature and speed settings, intuitive icons and a prominent hot top indicator that lights up when the heater is above 40°C. Select from three plate sizes to suit your application. All models can be used with the optional temperature probe for precise temperature control of the sample. The Guardian 3000 Series units offer safety, controlled heating, and powerful stirring for general laboratory use, all at a competitive price point. An industry-leading early detection system known as SafetyHeat uses two independent safety controls to monitor the electronics and stop heating before an overtemperature condition occurs. The rugged metal housing has a spill-resistant design for long life in the lab under harsh conditions. The smooth, chemical-resistant ceramic top makes for easy clean ups. INCLUDED: The Ohaus Guardian 3000 e-G31HSRDS Hotplate Stirrer, 115V includes: - PTFE-Coated Stir Bar (2.5 cm) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The Sievers 900 Series TOC Analyzers represent the next generation of the best-selling Sievers Model (more) 800. Based on GE’s patented, proven analytical technology, the 900 Series Analyzers offer unsurpassed ease of use, analytical performance, versatility, and reliability, and are designed to meet diverse application needs and regulatory requirements. The GE Autosampler can be used with the 900 Laboratory or Portable Analyzer for automated laboratory applications. It provides random access capability with high sample capacity (up to 63 positions for 50 mL vials). Range: 0.03 ppb to 50 ppm Precision: < 1% RSD Accuracy: ± 2% or ± 0.5 ppb, whichever is greater Analysis time: 4 minutes Sample temperature: 1°C – 95 °C Instrument sample flow rate: 0.5 mL/min Dimensions (HxWxD): 483 x 192 x 480 mm Weight: 14.3 kg

Measurement with application of 4 load cells is a guarantee of precise mass reading, regardless of l (more)oad positioning on the weighing platform. The platform scales C315.4 series is made of mild steel powder coated construction of the weighing platform. The platform comprises 4 load cells connected to an terminal PUE C315 series featuring backlit LCD display and 5 function buttons. The weighing platform and the terminal are connected through a long cable enabling hanging the terminal on a wall. The C315.4 series is available in pit version for easy placing heavy loads on the weighing platform without application of ramps. Scales is available in dual range version on surcharge.

MWMH series modules are not offered or distributed in the following countries: Germany, Switzerland, (more) Italy, Japan and the USA. Vast Max Capacity Range Magnetoelectric weighing modules MWMH are intended for mass measurement ranging from 1kg to 10kg. Minimum readability of 0.01g guarantees amazing accuracy for your measurement. Protection Against Challenging Conditions Hermetic versions of modules feature stainless steel housing with IP65 and IP69K. This allows operation even in the most challenging conditions. Mechanical design lacks sharp edges and gaps which ensures adherence to HACCP, GMP and FDA standards for safety and quality of operation. Fast and Precise Measurement High measurement accuracy with sd=1d* guarantees both readout of real weighing results and repeatability of indications. Cutting-edge design solutions provide fast measurement which is an asset allowing to install the module on automated production lines. Intended for fast and dynamic measuring processes the weighing module&rsquo;s converter throughput is 3200 meas./s. Cooperation with terminals Connecting the module to a multifunctional weighing terminal expands communication interfaces range and increases usage in industrial applications. Mechanical design versions: MWMH xxx - 1 - model with Binder connectors (IP65), MWMH xxx - 2 - model with Binder connectors, (IP65), power supply and control of the transporter on a weighing pan, MWMH xxx - 3 - model with cable glands, (IP 69K), MWMH xxx - 4 - model with cable glands (IP69K), power supply and control of the transporter on a weighing pan MWMH xxx - TWD - model with cable glands (IP 69K).