Agilent G1315A DADFor sale: refurbished Agilent 1100 series Diode Array Detector – G1315A

This listing is for a Trust 1000VA UPS. The unit is in full working condition and is ready for imme (more)diate release. The Trust 1000VA UPS is a compact and dependable uninterruptible power supply designed to protect your electronic devices from power interruptions and fluctuations, ensuring continuous operation. Key Features: Compact Design: The UPS is designed to save space while delivering robust performance, ideal for home offices, small businesses, or IT setups. Power Capacity: 1000VA Rating: Provides a maximum power rating of 1000VA, which is suitable for most computer systems, networking equipment, and peripherals. Surge Protection: Equipped with 3 surge-protected IEC power outlets, it safeguards connected devices from voltage spikes and surges, enhancing the longevity of your equipment. LED Indicators: Green LED: Indicates normal operation when connected to utility power. Yellow LED with Sound: Alerts users to a loss of utility power. Red LED with Sound: Signals an error, such as: Overloading: Connected devices draw more power than the UPS can support. Battery Life Warning: The battery may be nearing the end of its useful life (typically 2-4 years). LCD Display: An easy-to-read LCD provides real-time information on: Input and output voltage Power line status Battery health, allowing users to monitor the UPS performance at a glance. Smart Management Function: The UPS features a smart management function that enables automatic shutdown of connected devices during a mains power outage when connected via USB, preventing data loss and hardware damage. Additional Protection Features: The UPS includes an RFI filter, surge protection, and Automatic Voltage Regulation (AVR), which stabilize voltage fluctuations, ensuring reliable operation. Also provides modem/fax/phone protection to safeguard communication lines. Included Accessories: Comes with a detailed user’s guide and wall power connection, facilitating quick setup and user understanding.

LITHIUMSAFE SAFETY CABINETS Certifications: EN 14470-1 EN 16121 The line of LITHIUMSAFE safety cabin (more)ets consists of innovative high quality products, built in Italy and specifically built for the safe storage of lithium batteries. These cabinets are designed according to current standards and can be equipped with numerous accessories for further levels of safety. COSTRUCTION Completely built in electro-galvanized steel sheet, cold pressed with removable external structure; thicknesses of 1/1.5/2 millimeters and painting with anti-acid epoxy powders and passage in a thermal tunnel at 200°C. Particular insulation on the panels for high temperatures (800°C): calcium silicate and mineral fiber (fibroceramic free) at high density 300 Kg/m3 fixed with ceramic adhesives. Fireproof melamine laminate panels with high resistance to even aggressive vapours. Certification according to EN 14470-1 and EN 16121 standards. CHARACTERISTICS - AUTOMATIC CLOSING of the door in the event of temperatures exceeding 47°C - LOCK AND LOCK OF THE DOORS WITH KEY - Certified automatic closing SYSTEM (70/100 °C) of the air inlet and outlet ducts, maintenance-free, placed on the back of the cabinet. - Ejection HOLE diam. 100mm. at the back of the wardrobe - Anti-spark hinge in natural iron with brass pin. - 1 shelf perforated at the base - 3 cm thermo expanding GASKET. (DIN 4102) - 'Earth' CLAMP to prevent electrostatic charges. AUTOMATIC FIRE EXTINGUISHER The automatic fire extinguishing system works by detecting the presence of fire and controlling the discharge of extinguishing media so that the damage caused by the fire is minimized. The automatic extinguishing system includes a fire detection system, an extinguishing control unit and condensed aerosol generators. Information on the front panel display facilitates programming and simplified use. The possibility of programming the delayed activation of the sirens, or the time and duration of the extinguishing system make the unit very efficient and flexible. HOW DOES IT WORK? In the event of a lithium battery fire, the automatic fire extinguisher suppresses the fire and neutralizes the decomposition products of the electrolyte such as Hydrogen fluoride (HF), forming stable products such as KF and KHF2. The neutralizing action prevents the formation of highly flammable gases, such as hydrogen (H2), bringing the internal temperature down below the threshold necessary for a new fire to break out. Constituent parts of the fire fighting system: - LPCB certified according to EN 12094-1 and EN54.2 and 4 - Fire detection and automatic extinguishing - Graphic display 128 x 64 pixels - Fire extinguisher button on front of unit - Key switch for switching off mode selection: manual only or manual and automatic - 3 siren outputs - Power supply with 3A - Low absorption at rest: only 40mA - Inputs and outputs for remote function control - Extinguishment stop button and extinguishing cancel button - Storing of data events - RS-485 for remote connection In the image, the focus on the internal FBN fire extinguisher, in the double door model. Recommended accessories: - Charging points: 4x6 sockets. Contact us for more information.

LITHIUMSAFE SAFETY CABINETS Certifications: EN 14470-1 EN 16121 The line of LITHIUMSAFE safety cabin (more)ets consists of innovative high quality products, built in Italy and specifically built for the safe storage of lithium batteries. These cabinets are designed according to current standards and can be equipped with numerous accessories for further levels of safety. COSTRUCTION Completely built in electro-galvanized steel sheet, cold pressed with removable external structure; thicknesses of 1/1.5/2 millimeters and painting with anti-acid epoxy powders and passage in a thermal tunnel at 200°C. Particular insulation on the panels for high temperatures (800°C): calcium silicate and mineral fiber (fibroceramic free) at high density 300 Kg/m3 fixed with ceramic adhesives. Fireproof melamine laminate panels with high resistance to even aggressive vapours. Certification according to EN 14470-1 and EN 16121 standards. CHARACTERISTICS - AUTOMATIC CLOSING of the door in the event of temperatures exceeding 47°C - LOCK AND LOCK OF THE DOORS WITH KEY - Certified automatic closing SYSTEM (70/100 °C) of the air inlet and outlet ducts, maintenance-free, placed on the back of the cabinet. - Ejection HOLE diam. 100mm. at the back of the wardrobe - Anti-spark hinge in natural iron with brass pin. - 1 shelf perforated at the base - 3 cm thermo expanding GASKET. (DIN 4102) - 'Earth' CLAMP to prevent electrostatic charges. ACCESSORIES Q90: QUARANTINE PATENTED extinguishing system with tank for 90cm model FBN: automatic fire extinguisher FPC: automatic fire extinguisher with control panel, smoke and temperature sensor, beacon S6MT: UNEL 220V 6-position electrical multiple socket with thermal protection. S6: UNEL 220V 6-position electrical multiple socket. RIPF90VL: metal shelf, 695x420x39mm INTAKE SYSTEMS DIAM125BP: electric aspirator CSF100BPAMY11: ATEX electric fan CFN: molecular aspiration system certified according to standard NFX15-211 For more information on the products and safety systems available, we invite you to our dedicated post 'LITHIUMSAFE'.

LITHIUMSAFE SAFETY CABINETS Certifications: EN 14470-1 EN 16121 The line of LITHIUMSAFE safety cabin (more)ets consists of innovative high quality products, built in Italy and specifically built for the safe storage of lithium batteries. These cabinets are designed according to current standards and can be equipped with numerous accessories for further levels of safety. CONSTRUCTION - Completely built in electro-galvanized steel sheet, cold pressed with removable external structure; thicknesses of 1/1.5/2 millimeters and painting with anti-acid epoxy powders and passage in a thermal tunnel at 200°C. - Special insulation for high temperatures (800°C) with high density 300 Kg/m3 calcium silicate and mineral fiber panels (Fibroceramic free) fixed with ceramic adhesives. - Fireproof melamine laminate panels with high resistance to even aggressive vapours. Certification according to EN 14470-1 and EN 16121 standards. CARATTERISTICHE - AUTOMATIC CLOSING of the door in the event of temperatures exceeding 47°C - LOCK AND LOCK OF THE DOORS WITH KEY - Certified automatic closing SYSTEM (70/100 °C) of the air inlet and outlet ducts, maintenance-free, placed on the back of the cabinet. - Ejection HOLE diam. 100mm. at the back of the wardrobe - Anti-spark hinge in natural iron with brass plug. - 1 shelf perforated at the base - 3 cm thermo expanding GASKET. (DIN 4102) - 'Earth' CLAMP to prevent electrostatic charges CHEMISAFE QUARANTINE SYSTEM Thanks to this patented system, in the event of a fire inside the safety cabinet, an automatic response will be activated to overturn the shelves, thus allowing the batteries to fall into a water tank located at the bottom. By immersion, the fire will be promptly extinguished and the potential risk of self-ignition will be effectively neutralised. Simple and very effective system! The cabinet is equipped with a water pump and algaecide. The QUARANTINE versions have only 3 shelves instead of the basic 4. Demonstration video of the QUARANTINE system.

This Ready to Process Wave 25 Bioreactor System was removed from a university lab where it was surpl (more)us to requirements. None of the items have been tested because the power supply was not included. The system is in good cosmetic condition with minor marks from use. Included are; 1x GE Ready to Process CBCUCode no.28998100Mfg year 2015 1x GE Ready to Process Pump 25 w/ 2x pump headsCode No. 29000704Mfg year 2015There is some damage to the housing of the unit on the bottom LHS of the unit -as seen in photo. 2x PumpHeads:114DV OEM Pumpheads Prod Nos.113.5000.R33Ser Nos.66056-266056-3Mfg 2015 1x Icellis Docking StationProd No. 820284The unit is in good cosmetic conditionThe unit has a 32 Oz Nalgene vessel, 1x PALL Life Sciences Icellis Nano lidSer No. P004_G_169 1x Hamilton Visiferm DO 120 Sensor:Part no. 242450Heat Nos.•541742•425755Ser No. 026570 1x Icellis Perfusion Module w/ 2x pump headsProd No. 820288 Pumpheads:102R Twin Roller low-flowProd No. 013.211.000

Thermo Scientific Revco ULT-7150-9V Chest freezer, -150°C Lab This item is being sold on behalf of a (more)n operational laboratory. It is in good cosmetic condition and working order. The item received recent servicing by a Thermo Scientific engineer. Included is an Invisible Systems 105C/125C PT100 remote cryogenic probe. It is available for collection from Dublin, Ireland, but we may be able to offer shipping for an additional fee. The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

MA X7.A moisture analyzers are hi-tech measuring instruments intended for quick determination of rel (more)ative moisture content, dry mass content and other parameters in samples of different substances. MA.X7.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X7.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X7 Series moisture analyzers: Automatic opening and closing of the drying chamber 7” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X7.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

Benchmark MAGic Clamp Large Universal Platform The Benchmark MAGic Clamp universal platform for flas (more)ks & tube racks (18" x 18") is compatible with many Benchmark shakers. Click Here to View Product Video INCLUDED: The Benchmark MAGic Clamp Large Universal Platform includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty