Sensor Partners SP i-tec 2060 ll Infrared Temperature Controller

The KNAUER Online Degasser is a 2-channel for semi-preparative flow rates up to 50 ml/min. The degas (more)sing membrane is an innovative Teflon AF fluoropolymer which is more than 200x more gas permeable than regular Teflon and has excellent physical and chemical stability characteristics. Its high efficiency also allows for reduced internal chamber volumes– less than 7.7 ml per channel. For isocratic HPLC applications the 2 chambers of the semi-prep degasser can be connected in series for maximum degassing efficiency. For gradient applications, up to 2 eluents can be degassed simultaneously. For special applications, one degasser can also be used for multiple HPLC systems. The low dead volume makes reconditioning fast and minimizes solvent waste. Extremely low chamber volumes. Broad chemical compatibility is perfect for use in general HPLC applications Zero hysteresis even at higher flow rates No need to replace check valves or other parts even when under continuous operation Prevents air bubble spikes in the chromatogram Minimizes retention time fluctuations Minimizes gradient reproducibility problems Minimizes unwanted formation of chromophores which can disturb UV detection Minimizes unwanted oxidation or reduction which can disturb electrochemical detection Minimizes fluorescence quenching Technical Data: Dimensions: 85 x 165 x 315 mm (W x H x D) Weight: 2.5 kg Power Supply: 85 – 265 V, 47 – 63 Hz, 20 W Max. Flow Rate: up to 50 ml/min Number of Channels: 2 Degassing Method: gas permeation through Teflon AF amorphous fluoropolymer membrane Degassing Efficiency: < 0.5 ppm residual dissolved O2 at 1 ml/min Dead Volume: 7.7 ml Solvent Applicability: universal, except hydrochloric acid and halogenated hydrocarbons especially hexafluoro isopropanol (HFIP) Wetted Materials: PEEK, Tefzel, Teflon AF Vacuum Chamber: polypropylene and stainless steel

Harris ELT17V-85-V34 Ultra Low-Temperature Freezer. This was removed from a university lab where it  (more)was surplus to requirements. The unit powers up and has been fully tested. &nbsp;It is in good working order. (Thermometer used for testing not included). It is in reasonably good cosmetic condition with minor marks.

Integrated Technologies G-Sealer Variable Temperature Sealer S120499-1-A002 This was removed from a  (more)university lab where it was surplus to requirements. The unit powers up and is in full working order. It is in good cosmetic condition with minor marks.

Thermo Scientific Revco Elite Plus Ultra Low Temperature Freezer ULT2586-6-V48 This was removed from (more) a university lab where it was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks. Capacity 692 LitresInternal dimensions W 61cm x L 87cm x H 128cm

Hoefer TE70XP Semi-Dry Transfer Units w/ Built-In Power Supply Transfer Area Up to 14 x 16 cm Maximu (more)m Power Settings 30 V, 500 mA, 15 W Maximum Gel Capacity 4 Mini Gels Features - Intelligent built-in power supply—prevents the stack from overheating by monitoring the transfer status - Requires minimal current—does not generate excessive heat that can dry out the transfer stack and halt transfer or damage transfer units - Durable iridium oxide and stainless steel electrodes—allow for contamination free, consistent transfer - Vented electrodes—prevent build up of bubbles which may impair transfer - Minimal buffer requirements—reagent cost and preparation time are reduced The Hoefer TE70XP Semi-Dry Transfer Unit with Built-In Power Supply is an innovative system designed for the rapid and efficient transfer of proteins from polyacrylamide gels onto nitrocellulose or PVDF membranes. Featuring an intelligent built-in power supply, the TE70XP monitors transfer status in real-time, automatically halting the process to prevent overheating of the stack. With a 14 x 16 cm transfer area, the TE70XP accommodates up to four mini gels in a stacked format, allowing for high-throughput transfers without compromising quality. This semi-dry transfer unit is equipped with durable iridium oxide and stainless steel electrodes, ensuring contamination-free, consistent results. Vented electrodes prevent bubble buildup, enhancing the reliability of each transfer. Designed to minimize buffer requirements, the TE70XP reduces reagent costs and preparation time, making it a cost-effective solution for busy labs. Its robust construction includes a molded base with a platinum-coated titanium anode and a hinged lid with a stainless steel cathode, ensuring long-lasting performance. INCLUDED: The Hoefer TE70XP Semi-Dry Transfer Units w/ Built-In Power Supply includes: - Molded Base with Platinum-Coated Titanium Anode and Internal Power Supply - Hinged Lid with Stainless Steel Cathode - Blotting Paper (14 x 16 cm), 25 sheets - Porous Cellophane (20 x 35.5 cm), 50 sheets - Mylar® Masks (16.5 x 18.5 cm), 2 pcs - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The QIAgility is a compact benchtop instrument that enables rapid, high-precision setup of PCR exper (more)iments with ready-to-use software for ease and convenience. The software provides step-by-step guidance for worktable setup and automatic calculation of all mixes, eliminating the need to program pipetting steps. Just select the kit and cycler, define your targets and start the run. For added flexibility the QIAgility is operated via a laptop computer. The instrument is highly suited for laboratories performing PCR and RT-PCR reactions with applications in: ​ Gene expression analysis Genotyping Cloning Pathogen detection Food and veterinary testing Pipetting head: Single channel Tip volume: 1 – 200 µl HEPA filter: Preinstalled dual-cartridge HEPA filter system provides positive pressure clean air within the closed hood. Liquid-level sensing: Minimum detection volume (10 µl in 200 µl PCR tubes). Only functional in combination with QIAGEN Conductive Filtered Tips. Table capacity: 6x SBS positions (127.76 x 85.48 mm) for adapters and Tip Rack Holders 1x Master Mix Block 1x Reagent Block Precision: CV <1%, 5 – 200 µl (dry-well transfer) CV <5%, 2 – 5 µl (wet-well transfer) CV <10%, 1 µl UV lamp: Preinstalled UV lamp for worktable decontamination Dimensions (HxWxD): 450 x 540 x 630 mm Weight: 41 kg

Agilent Technologies G7167-60005 Sample Thermostat Lab This item was removed from a university where (more) it was surplus to requirement. It is in good cosmetic condition, we are unable to test it further at our facility.

This Olympus U-ETBI Microscope Ergo Head Tilt Telescope was removed from a university lab where it w (more)as surplus to requirements. Item appears to function correctly after being tested over a light source and slide and is in very good, clean condition. No further testing was carried out.

Hewlett Packard 5890 Series II Gas Chromatograph GC System This was removed from a university lab wh (more)ere it was surplus to requirements. All the units power up and are in reasonable cosmetic condition with marks from use. Included are; Agilent 6890 Series Injector Model - 18593BS/N - 3227G07221 Hewlett Packard 7673 Controller Model - 18594B # 206+S/N - 3302G07812 Hewlett Packard 5971A Mass Selective DetectorModel - 5971AS/N - 2950A00496 Hewlett Packard 59822B Ionization Gauge Controller Model - 01S/N - 3996 Hewlett Packard 82937A HP-1B Interface