Hermle SIEVA-3-TC Filtration Centrifuge with external temperature control

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Maximum RCF with fixed angle rotor: 20913 x g Maximum RCF with swing-bucket rotor: 4500 x g Maximum  (more)RCF with plate rotor: 3486 x g Speed range: 200 – 14000 rpm Temperature range: -9 °C to 40 °C Maximum capacity: 4x 750 mL/4x MTP Acceleration/braking ramps: 10/10 Timer: 1 min to 99 min, continuous, short-spin Dimensions (WxDxH): 700 x 608 x 345 mm Weight: 99 kg Equipped with: 1x Eppendorf A-4-81 swing-out rotor (max 4000 rpm) 4x Eppendorf bucket 4x Eppendorf MTP carrier 4x Eppendorf insert (10x 15 mL falcon tube capacity) 4x Eppendorf insert (5x 50 mL falcon tube capacity)

Max speed: 28000 rpm Max RCF: 51710 xg Acceleration: 9 stepped, reproducible profiles Braking: 9 ste (more)pped, reproducible profiles and unbraked deceleration Temperature control: 0°C to 40°C Dimensions (HxWxD): 358 x 540 x 600 mm Weight: 100 kg Equipped with: Heraeus 3740 fixed angle rotor Max speed 28000 rpm Capacity 12x 1.5 mL

Hettich Rotina 380 R This item was removed from a university where it was surplus to requirement. I (more)t is in good cosmetic condition both internally and externally. The item powers on and works as intended, it has been temperature-tested. (Thermometer not included) The Unit comes with the following Rotors: Hettich 1760 Rotor2 x 500 g4000 RPMS/N - 007162 Hettich 1798 Rotor4 x 300 g4000 RPMS/N 006337Buckets - 4 x Hettich 5092 005159

Hermle Z446 Centrifuge w/ Swing Out Rotor The Z446 universal centrifuge series offers the highest ca (more)pacity of any benchtop Hermle-Benchmark model. With air-craft grade, premium alloy construction, the 4 x 750ml swing out rotor can withstand centrifugal forces upwards of 4,500 x g with full loads of up to 28 x 50ml or 68 x 15ml tubes. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust acceleration and deceleration rates and change the end of run alarm tone. Rotor exchange is simple and requires less than one minute. An included rotor wrench can be used to loosen and install all rotors. As soon as the rotor is placed on the motor shaft, the identification process activates and the installed rotor code is displayed on the backlit LCD display. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z446 Centrifuge w/ Swing Out Rotor includes: - Z446-750 4 x 750ml Swing Out Rotor - Z446-750-B50 7 x 50ml Conical Buckets (Set of 2) - Z446-750-B15 17 x 15ml Conical Buckets (Set of 2) - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

This Molecular Devices Skatron Embla Microplate Washer was removed from a university lab where it wa (more)s surplus to requirements. The unit is in reasonably good cosmetic condition with some marks from use. It powers up but we were unable to test it further at our facility.

This Waters 410 Differential Refractometer was removed from a university lab where it was surplus to (more) requirements. The unit powers up but has not been tested further. It is in reasonably good cosmetic condition but has some marks from use.

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

Branson Sound-proof EnclosureAlthough ultrasound is above the audible range of the human ear, mechan (more)ical noise occurs when liquids are treated ultrasonically. The noise may be disturbing in a room with low ambient noise level if exposed for prolonged periods of time. Operating the Sonifier® in the Soundproof Enclosure can minimize mechanical noise produced by ultrasonic processing. The sturdy cabinet is lined with waterproof, sound-absorbing material, which is impervious to most solutions or laboratory regents and can be easily cleaned. A fully-transparent door enables viewing of the process while limiting the noise to an acceptable level. The decibel rating will lower by 20-25db. Openings at the top and bottom of enclosure make for easy access for use with either a cup horn or standard probes. Comes with inside column and adjustable clamp plate. Side panel allows for placement of horns, tips and manuals. INCLUDED: The Branson Sound-proof Enclosure includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Adam Equipment STB 8202E Solis Precision Balance, 8200g, 0.01g Capacity 8200g Readability 0.01g Rep (more)eatability 0.02g Features - High-resolution graphic display is amply sized for clear visibility - Level indicator and adjustable feet ensure proper balance setup for optimum weighing results - Large, grade 304 stainless steel pan allows swift cleaning - RS-232 interface provides speedy connection to computers and printers - External calibration allows for verification and adjustment with weights ("I" models feature internal automatic calibration) - Selectable digital filtering helps minimize effects of vibration and disturbances - Printouts include date and time for data tracking within Good Laboratory Practices (GLP) guidelines - Multilingual display permits use in various regions - Check weighing with audible alarm - Parts counting with preset sample sizes - Security slot for optional lock and cable to help prevent theft The Adam Equipment Solis Precision Balances are ideal for research and quality assurance labs, science education, precision counting, production, and manufacturing applications needing precision results. Users can readily view the comprehensive data on the amply sized graphic display. A multilingual display capability permits use of the balance in various regions, while recognizable icons help the weighing process flow smoothly. Formulation is simplified, as Solis stores up to 99 ingredients. The Solis keypad is simple to use, with easy-to-read buttons and helpful navigation arrows for uncomplicated operation. The Solis Precision Balance line features 11 different models that offer internal or external calibration, capacities from 360g to 8200g, and readabilities from 0.001g to 0.01g. The Solis Precision Balances provide an outstanding solution for a variety of lab applications. INCLUDED: The Adam Equipment STB 8202E Solis Precision Balance, 8200g, 0.01g includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Adam Equipment SAB 224I Solis Analytical Balance, 220g, 0.0001g Capacity 220g Readability 0.0001g R (more)epeatability 0.0002g Features - High-resolution graphic display is amply sized for clear visibility - Level indicator and adjustable feet ensure proper balance setup for optimum weighing results - Large, grade 304 stainless steel pan allows swift cleaning - RS-232 interface provides speedy connection to computers and printers - External calibration allows for verification and adjustment with weights ("I" models feature internal automatic calibration) - Selectable digital filtering helps minimize effects of vibration and disturbances - Printouts include date and time for data tracking within Good Laboratory Practices (GLP) guidelines - Multilingual display permits use in various regions - Check weighing with audible alarm - Parts counting with preset sample sizes - Security slot for optional lock and cable to help prevent theft The Adam Equipment Solis Analytical and Semi-Micro Balances are ideal for research and quality assurance labs, science education, precision counting, production, and manufacturing applications needing precision results. Users can readily view the comprehensive data on the amply sized graphic display. A multilingual display capability permits use of the balance in various regions, while recognizable icons help the weighing process flow smoothly. Formulation is simplified, as Solis stores up to 99 ingredients. The Solis keypad is simple to use, with easy-to-read buttons and helpful navigation arrows for uncomplicated operation. Solis models offer capacities from 120g to 510g and readabilities from 0.01mg/ 0.1mg to 0.0001g. The Solis Analytical and Semi-Micro Balances provide an outstanding solution for a variety of lab applications. INCLUDED: The Adam Equipment SAB 224I Solis Analytical Balance, 220g, 0.0001g includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty