Eutech WPLOW-10

This listing is for a Jenway 3540 pH & Conductivity Meter. The unit is in full working condition an (more)d is ready for immediate release. The Jenway 3540 is a combined pH and conductivity meter designed for use in laboratories where both parameters need to be measured. It offers a space-saving and flexible approach to measuring pH and conductivity. Key Features Simultaneous display of pH and conductivity: Two independent channels prevent interference between probes. Additional modes: Resistivity, salinity, TDS, and mV measurements are available. Data logger: Autosave and print options with storage of up to 500 readings (250 for each mode). Probes sold separately: Glass combination pH electrode, glass conductivity probe (K=1), and ATC probe are available. Specifications Ranges: Conductivity (0.01µS/cm to 1.999S/cm), pH (2 to 20.000), temperature (10.0 to 105.0°C or 14 to 221°F), and salinity (0 to 99.9ppm). Input impedance: Greater than 1012 ohms. Temperature compensation: Manual or automatic, with a range of 0 to 100°C. Dimensions: 210 x 250 x 55 mm (L x W x H).

Art Robbins Instruments Phoenix/RE Model-600-1010-00 Lab This item was removed from a university whe (more)re it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. The previous owner has notified us that the needle requires replacement. This item includes:- Phoenix/RE - DeeracFluidics Spot On - Melcor Thermoelectric Temperature Controller MTTC1410 - Various Cables and Wires

Mettler Toledo FiveEasy F30 Conductivity Meter Lab This item was removed from a university where it  (more)was surplus to requirement. The Mettler Toledo FiveEasy F30 is brand new in its original packaging, with one additional part being opened as stated below. Included are: - Mettler Toledo FiveEasy F30 - Brand New. - LE Sensors Cat no. 51340335 - Opened/Excellent Condition. - The five series operating & installation instructions cd - Brand New. - 12V Power supply with adaptors - Brand New.

This listing is for a Mettler Toledo SevenMulti pH Conductivity Meter. The unit is in full working  (more)condition and is ready for immediate release. Unit is supplied with P25 Printer. The SevenMulti is a versatile, professional-grade instrument tailored for precise measurements in various scientific and industrial applications, including environmental testing, laboratory research, and quality control in manufacturing. Key Features: pH Measurement: Range: -2 to 19.999, accommodating a wide range of acidic to basic solutions. Selectable Resolution: Users can adjust the resolution for enhanced accuracy based on specific requirements. Multi-Parameter Capability: Measures conductivity, resistivity, salinity, and total dissolved solids (TDS) with high precision, making it suitable for diverse applications, from water quality analysis to chemical manufacturing. Temperature Measurement: Range: -30 to 130 °C, suitable for various environmental conditions. Resolution: 0.1 °C, ensuring precise temperature readings that are critical for accurate pH and conductivity measurements. Integrated Electrode Testing: Conducts a comprehensive pH electrode test to assess slope, offset, drift, and response time without needing to re-calibrate, ensuring reliable and consistent performance. Compliance with Standards: Features a special mode for measuring conductivity compliant with USP and EP standards, essential for pharmaceutical and food industry applications. User-Friendly Interface: The back-lit display offers clear visibility of measurements and settings, even during two-channel operations. Context-sensitive help guides users through processes, reducing the learning curve. Security Features: Includes PIN-protected operation to safeguard sensitive data and settings. General system configurations, like date and time, can also be secured with a personal code. GLP Compliance: Adheres to Good Laboratory Practice (GLP) standards, allowing users to maintain accurate records and documentation of measurements, enhancing reliability for regulatory compliance. Ideal Applications: Laboratory Research: Perfect for academic and industrial labs conducting precise experiments requiring multiple parameter measurements. Environmental Monitoring: Suitable for testing water quality in various environments, from aquaculture to wastewater treatment. Pharmaceutical Quality Control: Essential for ensuring compliance with industry standards in drug manufacturing processes.

This listing is for a Jenway 3540 pH & Conductivity Meter.The unit is in full working condition and  (more)is ready for immediate release.The Jenway 3540 is a versatile combined pH and conductivity meter tailored for water testing applications in laboratories. Its compact design and dual functionality make it an excellent choice for efficient analysis of both parameters.Key Features:Conductivity Measurement Range: Measures conductivity from 0.01 μS/cm to 1.999 S/cm, suitable for various water quality assessments.pH Measurement Range: Capable of measuring pH levels from 2 to 20.000, accommodating a wide range of samples.Temperature Measurement Range: Operates within -10.0 to 105.0°C (14 to 221°F), enabling measurements in diverse environmental conditions.Versatile Measurement Options: Includes salinity and TDS (Total Dissolved Solids) measurement, resistivity, and ORP/Redox measurement via the pH channel.Ultra-Pure Water Function: Ensures ideal temperature compensation for precise readings in ultra-pure water applications.Temperature Compensation: Offers both manual and automatic temperature compensation with an adjustable temperature coefficient (0.00 to 10.00 % per °C).Adjustable Conductivity-to-TDS Factor: Customize the TDS factor from 0.4 to 1.0 for accurate conversions based on specific sample conditions.User-Friendly Features: Selectable units for temperature (°C/°F), ready indicator, and measurement hold features enhance usability.Data Management: Store up to 500 data sets with date and time stamps, ensuring comprehensive record-keeping.Output Options: USB or RS232 output enables easy data transfer to software or printers, facilitating analysis and reporting.GLP-Compliant Data Storage: Maintains compliance with Good Laboratory Practice (GLP) standards for traceability.Compact Design: Features a built-in stand and wall-mount option, saving valuable lab space.Applications:Water Quality Testing:Ideal for testing pH and conductivity in drinking water, wastewater, and industrial applications.Laboratory Research:Useful in laboratories for environmental monitoring and experimental setups requiring precise pH and conductivity measurements.Aquaculture and Hydroponics:Supports monitoring water parameters critical to fish farming and soil-less cultivation, ensuring optimal growing conditions.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Boxer 200/100 L Laboratory Autoclave was removed from a university lab where it was surplus to  (more)requirements. The client had informed us that the unit is in 100% working order and has had little use. It has now been professionally serviced and has been confirmed to be in full working order. It has passed all safety checks. Full report available on request. The internal chamber is 39cm (L)x 59cm (W)x 39cm (H). The unit is in very good condition with very few marks.

Limpsfield LCNP15 Natural Gas 1305 Kw Burner with Autoflame Control System This item was removed fro (more)m a university where it was surplus to requirement. It is in good cosmetic condition and in good working order. The item details are as follows: Model LCNP15Serial No. 01160Manufactured 30.05.14Output 1303Kw/hr With Autoflame Combustion Management SystemPart Nos. 2 x MM10005, Serial Nos. 12294, 12331 Siemens Ignition Transformer Type ZE 23/8.5 Dungs LGW 50 A4 pressure switch WEG W22 7.5hp 415 volt fan motor Caldaia A Condensazione high limit cut-off control 2.0" gas inlet pipe

Benchmark H2606-50 SureTemp Digital Oven, 50L Temperature Range 5°C above ambient to 200°C Temperatu (more)re Accuracy ± 0.5°C at 100°C ± 1.0°C at 200°C Volume 50L (1.76 cu. ft.) Features - Digital control system ensures precise temperature regulation without external thermometers - PID control compensates for load changes or door openings to maintain accuracy - Gravity convection heating provides even heat distribution throughout the chamber - Offers both timed operation and continuous mode for extended applications - Double-wall construction enhances insulation and heat retention - Six-sided fiberglass insulation minimizes heat loss and improves energy efficiency - Large viewing window allows live monitoring of chamber contents - In-lab calibration feature provides user control over accuracy adjustments The SureTemp Digital Ovens provide up to 200°C with both accuracy and precision using digital control, eliminating the need for external thermometers and repetitive "fine tuning” of an analog control knob. These ovens are suitable for agricultural and industrial applications to heat, dry, sterilize and even bake. Simply set the desired temperature and time and the oven will quickly reach the desired temperature using gravity convection for the set time while accurately monitoring the chamber temperature. Continuous mode is also available for longer applications. PID control provides automatic compensation after load changes or door opening for excellent accuracy. The Sure Temp digital ovens feature double wall construction, 6 sided fiberglass insulation, sealed doors, stainless steel chamber, in-lab calibration, and a large viewing window for live monitoing of the chamber. With stability as low as +/- 0.5°C, the Sure Temp Digital Ovens provide accurate, stable results to ensure your application is done correctly. INCLUDED: The Benchmark H2606-50 SureTemp Digital Oven, 50L includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The AP-12.5Y is designed to calibrate multichannel pipettes starting at 10 μl. The device feature (more)s a readability [d] of 0.01 mg and can calibrate up to 12-channel fixed-volume and variable-volume pipettes. Because the pipette calibration on the AP-12.5Y is fully automatic, it is four times faster. The calibration procedure for a 12-channel pipette takes less than 20 minutes, not six hours, on this instrument. When purchasing the AP-12.5Y, you get: two calibrated sensors: THB S and THB W, two weighing pans: standard, and for balance test and calibration, two pumps: a single-channel pump and a four-channel pump The ergonomic design of the AP-12.5Y makes it possible to empty weighing vessels, and their overfilling is signalled by Ambient Light. When calibrating a multichannel pipette, a four-channel pump is used to simultaneously remove water from four vessels, greatly reducing the time required for pipette calibration. After emptying a 12-channel pipette, the AP-12.5Y checks all channels in a single cycle. In addition to a database of pipette calibration reports, the AP-12.5Y includes a database of pipettes that is editable and contains maximum permissible error values according to ISO 8655. The report database, in turn, contains measurements and error values calculated for individual points and volumes. The user determines the format and content of the reports. The AP-12.5Y monitors the ambient conditions using calibrated sensors: THB S (ambient conditions measurement) and THB W (liquid temperature measurement), in accordance with ISO 8655. To calibrate the device with mass standards, the weighing pan must be replaced with a pan dedicated to checking and calibrating the balance (both are included in the standard equipment). The AP-12.5Y can calibrate not only 12-channel pipettes, but also single-channel pipettes.

PM Balances by RADWAG – Laboratory Precision Under Industrial Conditions Mono BLOCK® techn (more)ology The ability to weigh loads up to 120 kg on a large weighing pan with high accuracy and good repeatability, minimum eccentricity error over the entire range, quick and stable measurement (achievable within 1 second), parameter stability over time and during transport, weighing pan dimensions adapted to the accuracy of the balance are the distinguishing features of RADWAG PM balances. All of this is possible thanks to the use of a cutting-edge measuring system based on RADWAG’s enhanced MonoBLOCK® technology. The change in the design of the monoblock has made it possible to work with a readability of 0.01 g at a maximum capacity of 20 kg and 0.2 g at a maximum capacity of 120 kg, with a repeatability of 0.01 g, and resistance to changes in ambient conditions. PM balances also include: robust design based on a larger and taller Monoblock, built-in 4-point overload protection system, IP 43 ingress protection, internal adjustment, 5" colour display, easy start-up, intuitive operation, and ergonomics. Application PM balances not only provide an accurate reading and quick measurement, but they are also versatile, allowing them to be used in a variety of industrial sectors. Dosing, formulation-making, and parts counting are just some of the possible applications of these multi-purpose devices. PM balances will find use wherever high-accuracy, high-load-capacity weighing equipment is required. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.