Agilent 1260 Infinity II HPLC

This CTC Analytics Leap HTC PAL Autosampler Heating and Cooling HPLC was removed from a university l (more)ab where it was surplus to requirements. All units are in good cosmetic condition and powered up. The CTC Analytics Leap HTC PAL Autosampler was tested with a digital thermometer (not included). We are unable to test further at our facility. Autosampler consists of: CTC Analytics main unit MXY 01-01BSerial No. 113351 CTC Analytics Injector Column MZ01-00DSerial No. 1284 2 x CTC Analytics Pumps MZ01-00DSerial Nos. 3022, 3216 Supercool Box27 sample tray heating and cooling 3 x drawers 20cm x 12cmSerial No. CCO-00103 CCT Analytics Peltier Thermostat unit MN 03-02 CCT Analytics Power Supply MN01-00 CCT Control Pad and Screen MB 01-00A Needle wash unit Included:4 x power leads1 x data cableSolvent shelf with 1 litre glass Scott Duran bottle

This Thermo Scientific Surveyor HPLC System was removed from a university lab where it was surplus t (more)o requirements. Included are; 1 x AutosamplerPart no. SRVYR-AS 1 x MS PumpPart no. SRVYR-MPUMP 1 x PDA Plus DetectorPart no. SRVYR-PDA5P All the components power up but have not been tested further. They are in reasonably good cosmetic condition but have marks from use.

This Hewlett Packard / Agilent 1100 Series HPLC G1313A Autosampler was removed from a university lab (more) where it was surplus to requirements. The item is in good cosmetic condition and powered up. When powered up, the item ran a start-up self-test that displayed the motor in good working order, we are unable to test this item further at our facility.

Dionex Ion Chromatography System This was removed from a university lab where it was surplus to req (more)uirements. The system has been professionally serviced and is in good working order. A full report is available on request. It is in good cosmetic condition with minor marks. Included are; Dionex AS40 Automated SamplerModel: AS40-1Serial#: 98040160 Dionex IC20 Ion ChromotographModel: IC20Serial#: 99120293 Dionex LC25 Chromatography OvenModel: LC25Serial#: 0205041

HPLC Waters 600 system. Includes a Waters Delta 600 multi-solvent quaternary pump, CPG column, a Wat (more)ers photodiode array detector (PDA) 2996, a Waters 600 controller, a Waters 717 autosampler, a PC with a PCI card and Empower software 3. Pump head volume of 225 μL at a flow rate of 45 ml / min or a pump head volume of 100 μL at a flow rate of 20 μl. ml / min It has an operating flow range of 0.01 to 45.0 mL / min, adjustable in increments of 0.01 mL / min.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The innovative QIAcube controls integrated components including a centrifuge, heated shaker, pipetti (more)ng system, and robotic gripper. This enables the QIAcube to fully automate more than 40 QIAGEN spin-column kits.  The QIAcube is preinstalled with a variety of protocols for purification of RNA, genomic DNA, plasmid DNA, viral nucleic acids, and proteins, plus DNA and RNA cleanup. All standard protocols in the expanding range can also be downloaded free of charge. In addition, customized protocols tailored to meet your specific application demands can also be requested.  The QIAcube is highly suitable for academic research laboratories as well as pharmaceutical, biotechnology, and biomedical research laboratories performing applications, such as: Sequencing/sequencing analysis Gene expression analysis Genotyping Proteomics Includes: Sample tubes RB (2ml) x 2000 (Cat No./ID: 990381) Reagent bottles (30ml) x 90 (Cat No./ID: 990393) Rotor adapter x 624 (Cat No./ID: 990394) Filter tips (1000µl) x 4736 (Cat No./ID: 990452) Rotor adapter holder x 4 (Cat No./ID: 990392) Reagent bottle rack x 3 (Cat No./ID: 990390) Set rack labeling strips x 1 (Cat No./ID: 990391) Centrifuge: 12,000 x g maximum, swing-out rotor with 12 positions, maximum 45° Humidity: Relative humidity of 10-75% (noncondensing) Instrument dimensions: 650 x 620 x 570 mm Operating temperature: 18-28°C Pipetting system: Syringe size 1 ml, pipetting range 5-900 µl Samples per run: 1–12 samples per run Shaker: Speed 100-2000 rpm, amplitude 2 mm, heating range of room temperature to 70°C, ramp-up time of <5 min from room temperature to 55°C (+/-)3°C) Software: QIAGEN protocols are preinstalled on the QIAcube or can be downloaded at www.qiagen.com/MyQIAcube Weight: 70.5 kg 220-240V / 50-60Hz

The epMotion 5075 is supplied with 3 dispensing tools which are inserted automatically. These dispen (more)sing tools and their appropriate pipette tips can be used to dispense quantities of liquid in the volume range from 1 µL to 1000 µL. The liquid is samples from the source tube in pipette tips, transported and deposited in the destination tube. On request, an optical sensor automatically checks the correct selection and positionning of tubes, available supplies and the position of pipette tips in the rack, as well as liquid level in some tubes. With the aid of predifined commands, you can create and edit simple or complex dispensing operations yourself and combine these into methods. In the process, you specify in the software, among other things, the source location and destination location as well as the desired dispensing or transport parttern. Equipped with following dispensing tools: TS 50 – volume range 1µL to 50 µL TS 300 – volume range 20 µL to 300 µl TS 1000 – volume range 40 µL to 1000 µL Including PC with software

This was removed from a university lab where it was surpus to requirements. The unit is operational  (more)but noisy. We used 3-phase plug in testing (not included). It is in reasonable cosmetic condition with marks from use.

F1 class mass standards are exceptional measuring tools that represent the pinnacle of precision in  (more)the field of metrology. Classified as F1 metrology class, they are perfect for advanced applications where every detail of measurement is of paramount importance. F1 mass standard: flat polygonal sheet Nominal value: 500 mg Material: nickel silver F1 Class Mass Standards &ndash; Key Features Highest Precision and Accuracy - F1 class mass standards are characterized by absolute measurement precision and extraordinary accuracy. They are designed to meet the most stringent standards for acceptable deviation from actual weight. Stability under Difficult Conditions - An important feature of F1 class mass standards is their ability to maintain measurement stability even under harsh environmental conditions. The standards of this class are resistant to changes in temperature, humidity and other factors that affect the precision of measurements. Calibration in Accordance with International Standards - The calibration process for F1-class mass standards is rigorous and in accordance with international standards. This ensures that standards of this class are globally recognized and can be used in different countries. Specialized Construction Materials - F1-class standards are often made of materials with unique physical properties. This provides them not only with precision, but also with durability and wear resistance. Application 1. Industrial Metrology F1 class mass standards are used in metrology laboratories engaged in the testing and maintenance of measurement standards. 2. Scientific Research In scientific research, especially in high-precision fields such as physics and astronomy, F1-class mass standards are a key tool. 3. Aerospace Industry In the precision mass measurements required by the aerospace industry, F1-class standards guarantee reliability and accuracy. 4. Calibration Laboratories In calibration laboratories where uniformity and precision are a priority, F1-class mass standards are the standard of excellence. F1-class mass standards are synonymous with the highest quality and precision in the field of metrology. Their use is crucial where even the slightest deviation from the standard can carry unpleasant consequences. They are tools for advanced applications that contribute to raising standards in the field of mass measurement.