HPLC Agilent 1100 VWD

AZURA preparative HPLC pump P 2.1L covers wide flow rate range and pressure capabilities. It has bee (more)n designed for purification of mg and gram samples. The Mobile Control allows intuitive control in stand-alone operation. The integrated automatic recognition of the pump head with RFID technology allows fast adaptions of the pump for various applications. Preparative pump offers wide range of flow rates (0.1-1000 ml/min) Choice of different LC software platforms Improved electronic drive compensation Integrated compressibility compensation Integrated leak management Constant pressure operation mode Solvent delivery Pump type: Preparative HPLC pump Delivery system: double piston pump with Al²O³ pistons Pump head: 250 ml/min Pump head materials: titanium Pressure sensor materials: PEEK (Polyether ether ketone) Maximum delivery pressure: 22.5 MPa (225 bar, 3260 psi) up to 100 ml/min, 20 MPa (200 bar, 2900 psi) at 250 ml/min Flow rate range: 0.1-250 ml/min, 0.5-200 ml/min (recommended) Flow rate increment: 0.01 ml/min Flow rate accuracy: ± 2 %, measured at 5 – 50 % of flow range using ethanol/water 10:90 Flow rate precision: < 0.2 % RSD Gradient support: isocratic, upgradeable to a binary HPG system with additionalpump P 2.1L or to a binary orternary LPG system HPG: gradient accuracy: ± 2 % (5 – 95 %, measured at 5 – 50 % of flow range, water/caffeine tracer) HPG: gradient precision: 1 % RSD, based on retention time at constant room temperature LPG: gradient accuracy:  ± 3 % (5 – 95 %, measured at 5 – 50 % of the flow range, water/caffeine tracer) LPG: gradient precision: 2 % RSD, based on retention time at constant room System protection: soft start, Pmin and Pmax are programmable Wetted materials: titanium,stainless steel, graphite fiber reinforced PTFE, FKM, PEEK, sapphire, aluminum oxide (Al²O³) Ambient conditions: temperature range: 10–40 °C; 50–104 °F, air humidity: below 90 % humidity (non condensing) Leak sensor: Yes Communication Control: LAN; RS-232; analog and event controlled Analog inputs: 0-10 V Analog control input: flow rate Level/event outputs: 8 event outputs (TTL, OC, relays) Programming: 19 programs + 9 links (to programs) + 1 wake up program Special features: system pump head is detected automatically using radio frequency identification (RFID) General Power supply: voltage range: 100 – 240 V, 50 – 60 Hz Dimensions: 361 x 208.2 x 523 mm (W x H x D) Weight: 19 kg

Dionex UltiMate 3000 With 2 FLM-3100 Flow Manager – Spares/Repairs This system was removed from a un (more)iversity lab where it was surplus to requirements. All included units are in good cosmetic condition and power on. However, due to the following issue, the system is being sold as Spares/Repair: The FLM-3100 displays a valve error. Both valve bodies are missing, and the left-hand valve does not operate. This system comprises the following: Dionex UltiMate 3000 With 2 FLM-3100 Flow Manager 2 x - IonPac CG5A 4 X 50mm Dionex FLM-3100 Flow Manager (top) Dionex FLM-3100 Flow Manager (bottom)

This Antec Scientific Alexys 100 LC-EC System was removed from a university lab where it was surplus (more) to requirements. All the modules power up but have not been tested further at our facility. It is in good cosmetic condition with only minor marks from use. The lab informed us that it was working fine before it was put away about 5 years ago. There are a number of consumables included with it. The system includes; 1x LC 100Part No. 182.0035 1x AC 100Part No. 183.0035 1x&nbsp;LC 110Part No. 193.0035 1x AS 100Part No. 181.0037 1x Decade IIPart No. 171.0035 1x OPRPart No. 184.0035

Amersham Biosciences AKTA FPLC System UPC-900 P-920 INV-907 M-925 Frac-950 This was removed from a u (more)niversity lab where it was surplus to requirements. The unit has been professionally serviced and is in full working order. It will require an interface box to connect it to a PC. It is in good cosmetic condition with minor marks from use. Included are; P-920 -Serial number- 01155727Code number- 18-1164-68 AKTA FPLCserial number- 01160429Code number- 18-6083-20 UPC-900Serial number- 01159938Code number- 18-1128-95 INV-907Serial number- 01158917Code number- 18-1108-40 M-925Serial number- 01160502Code number- 18-1118-89

HPLC Waters 600 system. Includes a Waters Delta 600 multi-solvent quaternary pump, CPG column, a Wat (more)ers photodiode array detector (PDA) 2996, a Waters 600 controller, a Waters 717 autosampler, a PC with a PCI card and Empower software 3. Pump head volume of 225 μL at a flow rate of 45 ml / min or a pump head volume of 100 μL at a flow rate of 20 μl. ml / min It has an operating flow range of 0.01 to 45.0 mL / min, adjustable in increments of 0.01 mL / min.

Agilent 1100 Series HPLC System consisting of: 1100 Series Degasser G1379A S / N: JP40716471. Binary (more) Pump 1100 Series G1312A FW: A.07.01 S / N: DE43616890. Automated injector Series 1000 G1313A FW: A.07.02 S / N: DE23920959. Thermostated column compartment G1316A 1100 Series FW: A.07.02 S / N: DE43643595. 1100 Series UV Detector G1314A with 10mm cell and G1369A LAN card FW: A.07.02 S / N: JP24020131. Windows 7 PC with Chemstation B.04.03-SP1 Agilent 1100 Series HPLCs are considered the most popular HPLCs in the world. They are robust, durable and versatile systems. Our instruments are restored according to the manufacturer's specifications to provide the best performance. They have a one year warranty. The 1100 HPLC series supports efficient pump action as well as advanced data analysis and diagnostic software. The system is easy to use and has a low cost. Looking for a more personalized product? All of our Agilent HPLC systems can be configured to your specific requirements.

Temperature range: -50°C to -85°C Capacity: 691 L Interior dimensions (HxDxW): 1280 x 620 x 880 mm D (more)imensions (HxDxW): 1975 x 920 x 1210 mm Weight: 376 kg

RMC MT-7 Microtome with Accessories Set This was removed from a university lab where it was surplus  (more)to requirements. The unit powers up and is mechanically in good working order. It is in good cosmetic condition with minor marks. It also includes various unnamed accessories. These include bracket fixings, allen keys, screws, fuses, safety guards, eyepieces and other items we are unable to identify. Also included is a dust cover and operational manuals x 3.

Dionex DX-500 Ion Chromatography System - AD20 GP50 AS40 ED40 LC20 Lab This was removed from a unive (more)rsity lab where it was surplus to requirements. The unit powers up and has been serviced by a qualified technician (report available on request). It is in good working order. It is in good cosmetic condition with minor marks. Included are; LC20 Chromatography EnclosueModel - LC20SN - 00030734 ED40 Electrochemical DetectorModel - ED40-1SN - 00030525 GP50 Gradient PumpModel - GP50SN - 00010476 AD20 Absorbance DetectorModel - AD20-1SN - 99010291 AS40 Automated SamplerModel - AS40-1SN - 08070894

F1 Mass Standard - knob weights without adjustment chamber - set (1 mg - 1 kg), wooden box Number of (more) pieces in the set: 25

Scilogex Block, used for 1.5mL tubes, 24 holesThe Scilogex 1.5mL Block accomodates 24 x 1.5mL tubes  (more)with a diameter of 10.9mm and 31mm depth. INCLUDED: The Scilogex 1.5mL Block includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA DB 4.8 Round Bottom Tubes Dry Block (35 mm)