Agilent Zorbax Eclipse XDB-C18 Column 963967-902

SAFETY FIRE CASE TYPE 30 - CHEMISAFE - Completely made of electrogalvanized steel sheet with a thick (more)ness of 1 - 1.5 mm, cold bent - Gray RAL7031 - External finish made of acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Cabinet insulation with high density rock wool panels and calcium sulphate panels - Automatic closing of the lid when the ambient temperature exceeds 50°C 30 mm heat-expanding insulating gaskets which, in the event of a temperature increase, guarantee perfect sealing of the container according to the EN14470-1 standard - Non-standard trolley - Side handles - Lid with lock and key - 1 retention tank in painted steel - ISO 3864 : signs with pictograms - Certified as fire resistant for 30 minutes, according to EN14470-1 BV (Bureau Veritas Supplied: - 1 stainless steel retention tank (capacity 1.5 litres) Optional: - Wall mounting - Internal carbon dioxide fire extinguisher with automatic thermal activation (62 °C) - Cart - Pipe passage (chromatography) APPLICATION: CPG/HPLC CHROMATOGRAPHY Storage of solvents in a portable fire-resistant container and linked to the chromatographic chain via small tubes. The tubes are connected through a fire resistant passage with a diameter of 2 cm located on the lid of the container. In the photo the convenience of the CHEMISAFE transport box. Versatile and very useful. Sturdy structure and metal door straps ensure you a long life. With the optional trolley, very easy to transport anywhere. WHAT IS CHROMATOGRAPHY? Chromatography is a process for separating the components of a mixture. To start the process, the mixture is dissolved in a substance called the mobile phase, which carries it through a second substance called the stationary phase. To know more: Cromatografhy On our webshop there are only some of the models that can be ordered. If you are interested in all the possibilities available, contact us. DO YOU NEED HELP? Do not hesitate to contact us, our CHEMISAFE product expert will help you choose the model that best suits your needs or design the perfect set for your laboratory. Go to the CONTACT form ➞

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Manufacturer: Cohesive Technologies Model: TurboFlow HTLC Cyclone 0.5 x 50 mm P/N: 952661 Specificat (more)ion:Compound      Time Symmetry Width1. Acetone       0,985 0,705  0,2122. Butyl Paraben     1,807 0,770  0,695Reduced plate height (acetone) = 6,4 Item delivered:- 1 x TurboFlow HTLC Cyclone 0.5 x 50 mm Conditionen:The column is in new condition.

Thermo Dionex ASRS 300 2 mm Self-Regenerating Suppressor Dionex reference: 064555 Year of manufactur (more)e: 2012 Never used

GE Lifescience BioProcess BPG 140/500 Glass Chromatography Column This was removed from a universit (more)y lab where it was surplus to requirements. It is in good cosmetic condition with minor marks. Model: 140/500Serial#: 10051154Code#: 18111508Manufactured: 2010 Item specifications: Operating temp. TS: 4-40ºCMax column volume: 7.5LDesign Pressure PS: 3 bar g Item fitted with:2 x GE Healthcare Salvi DN6 1081 4-way 316L Valve 18-5757-01 w/ 1/2" Sanitary Fitting

The 8-channel arm can be operated with both disposable tip pipettors and fixed tips pipettors (Teflo (more)n-coated). The samples can easily be exchanged by the user. Mixed operation is also possible. The 8-channel pipettor is flexible, can expand, move to 8 independent Z positions and pipette 8 different volumes. Liquid level sensing is standard. The 8 glass syringes are available in different volumes, the present offer contains 250 ul syringes. The Biomek NX deck can be designed flexibly. The labware is placed on so-called ALPs (Automation Labware Positions), which are either static (pure parking positions) or active (heating, cooling, shaking, stirring, vacuum, etc.). Passive and active ALPS can be configured by the user on any deck position. The Biomek NXP platform is equipped with a unique safety light curtain (no collision possible during manual intervention) and fully automatic optical framing (AccuFrame). Transfer volume: 0.5 µl Tip types: P20, Fixed 60 mm Accuracy: ± 5% Precision: ≤ 10% Transfer volume: 1 µl Tip types: P20, Fixed 60 mm Accuracy: ± 3% Precision: ≤ 7% Transfer volume: 5 µl Tip types: P20, Fixed 60 mm Accuracy: ± 3% Precision: ≤ 5%

This RS Biotech RS Biotech Galaxy R CO2 Incubator Model - 170-300 was removed from a university lab  (more)where it was surplus to requirements. The item is in good cosmetic condition but due to the control panel being removed, we are unable to perform any test. Therefore, it is being sold as Spares or Repairs.

Torrey Pines Scientific Inc Echotherm Heating/Chilling Plate IC22-2 This item was removed from a uni (more)versity where it was surplus to requirement. The unit powers up and is in good working order. It was tested with a digital thermometer (not included). It is in good cosmetic condition.

Powerbank ZR-04 is used for rechargeable power supply for balances and scale accessories. It uses fa (more)st charging technology. It allows long operating time without recharging and, thanks to the “Low Power” function, powering devices with low power consumption. The ZR-04 powerbank is made of high-quality components that ensure reliable operation. A display indicating the state of charge enhances ergonomics. Powerbank ZR-04 meets airline standards, which means that it can be carried on board an airplane as hand luggage. The device can simultaneously power the balance/ scale and charge the internal battery. The average power time of the balance/ scale is, depending on the product series, from 8 to as much as 24 hours.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Labconco FreeZone Stoppering Tray Dryer with 6-Port Manifold FreeZone Stoppering Tray Dryers lyophi (more)lize moderate to largeloads of vials or serum bottles and stopper them under vacuum. They offertemperature control from -40 to +40C. Options include a 6-port manifold,isolation valve and sample trays. A pneumatic mechanism stoppers containers undervacuum on three large adjustable processing shelves, 16.5” x 12” each. AnHCFC/CFC-free refrigeration system and electric heater cool and heat fluidmedium that is circulated through the shelves to maintain shelf temperatureswithin ±1C. Lyo-Works™ OS lets the user set up to 30 programs, with up to 16steps each; record, chart and store data; and receive email alerts. The traydryer connects to a FreeZone Console Freeze Dryer that provides a real timedisplay of the tray dryer’s parameters on a large capacitive touch screen.Features Three 16.5 x 12 in. temperature-controlled (±1C), adjustable shelves with sample temperature sensors Chamber pre-freezes samples to save time and money by eliminating need for separate freezer and product transfer Up to 594 sq. inches of shelf space Circulating fluid in shelves ranges from -40 and +40C 1/8 in. OD backfill port introduces sterile air or inert gas from outside source to chamber, protecting samples from atmospheric moisture and contaminants Lyo-Works™ OS provides real time display of freeze dryer and tray dryer parameters on 5 in. full color, capacitive touch screen on connected FreeZone 6, 12, or 18L Freeze Dryer (sold separately) Microprocessor-based controller allows up to 30 different temperature programs to be stored and repeated, each using up to 16 different steps Display provides navigation to manual or program mode, probe temperatures, vacuum in mBar, Torr or Pa, step of program in progress, time remaining in present step, and end of program, as well as alarms Optional 6-Port Tray Dryer Manifold accommodates either 1/2 in. or 3/4 in. flask adapters and connect to flasks and other glassware Optional built-in isolation valve separates Stoppering Tray Dryer from freeze dryer to shorten time necessary to reestablish working vacuum levels and to provide means for determining end point Freeze dryer, vacuum pump with displacement of at least 163L/minute, and freeze dry glassware (if not bulk freeze drying) are required (not included) INCLUDED: The Labconco 794801100 FreeZone Stoppering Tray Dryer with 6-Port Manifold 115V, 60Hz includes: - Sample Temp Sensor x 3 - Communication Cable - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty