Perkin Elmer Arnel Autosystem XL GC Gas Chromatograph Lab

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Perkin Elmer GC Gas Chromatograph Clarus 480 was removed from a university lab where it was sur (more)plus to requirements. It is in reasonably good cosmetic condition and powers up. The original ECD detector has been removed, leaving mains cables exposed, therefore, this item is listed as Spares/Repair. Part number- N664948ESerial number- 480S13030901

Perkin Elmer Arnel Autosystem XL GC This system was removed from a university where it was surplus t (more)o requirement. It powers up and is in good cosmetic condition, we are unable to test it further at our facility.

Waters Quattro Micro GC Mass Spectrometer Module Lab This system was removed from a university lab w (more)here it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. The system comprises the following: - 1x Waters Quattro Micro GC S/N: RAB339- 1x Haug Mettler Toledo En Sl Power Pack Discharge Section Transformer I.D.: 01.7906.005- 1x 1x Quattro Micro GC Performance Maintenance Kit S/N: 201000170- 2x Collision Cell (Spare) P/N:M945606DC1- S/N: 176/072 - 3x VAT Mini Gate Valve Assembly, fabrication number 01232-BA06 S/N: A-986159S/N: A-962440S/N: A-70014- 1x Mini Gate Valve Assembly S/N: 2002- 1x Hexapole assembly Type 96151 10KV - 1x Waters CI Probe M946692 BC1 - 1x Waters CI-GC Probe M946690 BC1 - 5x Waters EI Probe M946696 - 5x Stainless steel filter connectors - 5x 4 mm Cup Splitter Liners - 1x Micromass MA4184 Waters 2 Way Control Box - 1x Collision Cell P/N: M945606DC1- 2x G1530-80905 - 4x 10a anti surge fuses - 4x 10a Quick blow fuses - 1x Bag of assorted quick blow fuses - 1x Bag of assorted slow blow fuses - 2x 8a anti surge fuses - 8x 15a anti surge fuses - 10x UY405565/60 - 10x Packs of Injection Septa 6366401 - 10x Packs of ITM 3 UY405565/60 - 37x Boxes of assorted ceramic spacers, insulators, rods, ion exit plates and blanking plugs - 14x Filament Rhenium M960080BC2 - 13x Filament pl02 S100638BC0-S - 3x Probe tip assembly M960084BC1 - 2x User manual - 4x Bottles of activated Alumina 450 grms - 1x Tin of activated Alumina 450 grms - 2x Bottles of aluminium oxide powder - 1x Waters Quattro Micro GC Standards Kit - 1x Detector Probe power supply. - 1x Connecting pipes with valves - 1x MAGY filter drain - 2x Bags of assorted Viton and degassed O-rings - 1x Bag of assorted ceramic spacers and bushes - 1x Bag of assorted nuts/bolts/washers/jubilee clips/fixtures/fittings - 1x Box of assorted connecting leads - 1x Utility drawer

Ellutia 200 Series Compact GC with FID detector. Gas chromatograph compact, lightweight and easy to  (more)use. Analyses of simple and economical your samples of medical cannabis or recreational purposes to provide a quality product. Determines profiles of taste, absence of pesticides and solvents used during the extraction and potency levels of THC and CBD. The computer is ideal for users without experience in chromatography. Reduces cost and time of analysis per sample.

The Cole Parmer type Masterflex L/S hose pump is ideal for pumping corrosive, abrasive and viscous l (more)iquids without damaging the pump. The Cole Parmer Masterflex L/S can also be used in the pharmaceutical and biopharmaceutical industries. This hose pump can be used in combination with the L/S 13, L/S 14, L/S 16, L/S 25, L/S 17 and L/S 18 hoses. Speed: 10 – 600 rpm Pump head type: 7518-00 Hose range: L/S 13: 0.06 – 36 ml/min L/S 14: 0.21 – 130 ml/min L/S 16: 0.80 – 480 ml/min L/S 25: 1.7 -1000 ml/min L/S 17: 2.8 – 1700 ml/min L/S 18: 3.8 – 2300 ml/min

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

KNF LIQUIPORT IP65 NF 1.100 FT.18RC Diaphragm Liquid Transfer Pump Flow Rate 0.2 to 1.3 l/min Sucti (more)on Height (max.) 3 mWg Pressure (max.) 4 bar (rel.) Features - Small footprint - Simple, intuitive operation - Manual and remote control - Self-priming, can run dry - Splash-proof with IP65 rating - Available with different material configurations for chemical resistance - Maintenance-free - Available pump head materials: PP, PVDF, PTFE - Diaphragm material: PTFE-coated - Valve material: FFKM-Simriz - Output signal fault alarm - Cable for external control included Chemically resistant liquid transfer diaphragm pump. Offers wetted material combinations for optimal chemical resistance. Equipped with manual and analog controls. INCLUDED: The KNF LIQUIPORT IP65 NF 1.100 FT.18RC Diaphragm Liquid Transfer Pump includes: - Barbed Fittings for Tubing ID 8mm - Cable for external control - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA Oven 125 Control Drying Oven w/ Glass Door Heat Output 1500 W Working Temperature room temp. + (more)5 - 300 °C Operating Area Inner chamber 550 x 525 x 450 mm Features - Powerful IKA Oven 125 series for drying, heating, ageing, with rapid and precise temperature control. - 125 l high-quality insulated interior for cost efficiency, odour reduction, and uniform temperature. - Heats up to 300°C with TWB security features and independent temperature curve monitoring. - Glass door enhances monitoring of samples, ensuring safety and precision. - Well-lit interior, automatic fan-off when door opens, and up to 6 stainless steel shelves. - Includes interface for an extra sensor and USB storage for direct regulation and data logging. - Two TFT displays for clear parameter visibility, intuitive user interface for profile management. - Equipped with real-time clock for digital documentation and programmed start. The models in the IKA Oven 125 dry series are powerful drying cabinets for temperature regulation, drying, ageing and heating tasks. Rapid heating and exact temperature regulation guarantee reproducible results in industrial laboratories, schools and universities, research, quality control or science. Thanks to its high quality insulation, the device has a very large interior of 125 l in relation to its total volume. This structure also reduces odour emissions and operating costs and ensures excellent temperature uniformity.The Oven 125 control dry recirculating air drying cabinet heats up to 300 °C. The additional temperature selection limited TWB (DIN 12880) meets the highest security requirements. Furthermore, the temperature curve can be monitored during testing independently of the safety temperature. This means that your test material is always protected.The glass door allows for better monitoring of your samples.A well thought out interiorThe generously dimensioned interior of the Oven 125 control dry is comfortably illuminated. A practical cable bushing at the rear of the device is provided as standard for measurements in the oven or in the test material. The fan switches off automatically if the door is open. Up to 6 insertable shelves can be accommodated in the interior made of stainless steel.InterfacesThe Oven 125 control dry offers an interface for an additional sensor for direct temperature regulation in the test material. Test parameters can be stored directly on a USB stick.Two displaysAll important process parameters are displayed clearly on two large TFT displays. The temperature profiles and individual user profiles can be entered via the intuitive user interface. The real-time clock enables convenient digital documentation and a time-delayed start.Click Here to View Product Video INCLUDED: The IKA Oven 125 Control Drying Oven w/ Glass Door includes: - IKA Oven 125 control - dry glass - IO T 1.00 (2x) - Tilt protection (2x) - Screwdriver (for adjustment of temperature limit) - USB cable - Calibration certification - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Oven 125 Control Drying Oven w/ Glass Door Specifications Heat output1500 WWorking temperatureroom temp. +5 - 300 °CAdjustable safety circuit50 - 270 °CAdjustment and display resolution0.1 KTemperature stability (150°C, center, standard door)0.5 ±KTemperature displayyesTimeryesTimer displayLCDTime setting range1 - 142560 minNumber of trays max.6Load for one tray max.30 kgOperating area inner chamber550 x 525 x 450 mmTotal volume inner chamber125 l Air outlet port diameter inside48 mm Dimensions (W x H x D)700 x 825 x 650 mmWeight89 kg Permissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 20RS 232 interfaceyesUSB interfaceyesVoltage220 - 240 / 115 / 100 VFrequency50/60 HzPower input1600 WPower input standby2 WComparison of ModelsSpecificationsIKA Oven 125 BasicIKA Oven 125 Basic w/ Glass DoorIKA Oven 125 ControlIKA Oven 125 Control w/ Glass DoorHeat Output1500 W1500 W1500 W1500 WWorking Temperature RangeRoom temp. +5 - 250 °CRoom temp. +5 - 250 °CRoom temp. +5 - 300 °CRoom temp. +5 - 300 °CTimer Display7 segment LED7 segment LEDLCDLCDTime Setting Range1 - 144000 min1 - 144000 min1 - 142560 min1 - 142560 minInner Chamber (WxDxH)550 x 525 x 450 mm550 x 525 x 450 mm550 x 525 x 450 mm550 x 525 x 450 mmTotal Volume Inner Chamber125 L125 L125 L125 LExternal Dimensions (WxHxD)700 x 825 x 650 mm700 x 825 x 650 mm700 x 825 x 650 mm700 x 825 x 650 mmRS 232 InterfaceNoNoYesYesUSB InterfaceYesYesYesYesVoltage220 - 240 / 115 / 100 V220 - 240 / 115 / 100 V220 - 240 / 115 / 100 V220 - 240 / 115 / 100 V.comparison-table tr td:nth-child(5) { background-color: #fffacd; } Request a Formal Quote

IKA Eurostar 200 Control P4 Overhead Stirrer Speed Range 0/4 to 530 RPM Viscosity Max. 150000 mPas (more) Setting Accuracy Speed 1 ± RPM Features - Multilingual TFT display - Programmable functions - Integrated temperature measurement - Interval operation - Timer function - Adjustable safety circuit - Locked function - Infinitely adjustable speed - Overload protection - Short-term overload operation - Slim casing - Quiet operation - Error code display - H 67.60 temperature sensor and WH 11 WiCo holder included in delivery Extremely powerful laboratory stirrer for highly viscous applications for quantities up to 100 l (H2O). It is designed with a removable wireless controller and a digital TFT display. It automatically adjusts the speed through microprocessor controlled technology within the speed range of 0/4 - 530 rpm (two speed ranges). The stirrer comes equipped with a RS 232 and a USB interface to control and document all parameters. An integrated torque trend display is provided for the measurement of viscosity changes. Safety circuits installed ensures automatic cut-off in an anti-stall or overload conditions. Continuous comparison of shaft speed to desired speed is maintained and variations are adjusted automatically. This guarantees a constant speed even with changes in viscosities of the sample.