CTC Analytics Combi PAL GC Autosampler

The ETI-MAX 3000 is a fully automated microtiter plate analyzer performing the complete sample proce (more)ssing (sample pre-dilutions, sample and reagent dispensing, incubations, wash processes, plate transports) as well as the photometric measurement and evaluation. The instrument is controlled by Windows PC software. This software allows the user to process the pre-defined assays of DiaSorin as well as assays programmed by the user. The clear structure with intuitive user-guidance allows simple and quick operation of daily routine jobs as well as programming of user-specific assays. Liquid handling: 1 ml thinner Disposable tips: 300 or 1100 µl Pipette range: Simultaneous operation of 4 plates Precision (samples and reagents): CV < 8.0% at 10 µl, CV < 2.5% at 100 µl Level sensor: Electronic Clot detection: Yes Mixing: Yes (pre-dilution tube and microplate) Multipipetting: Yes (sample, control and reagent) Pipetting time samples: < 18 min/96 wells (100 µl/well) Pipetting time reagents: < 4 min/96 wells (100 µl/well) Carry-over: None Identification: Barcode scanner for primary vessels, controls and reagents, Barcode scanner for microtiter plates Tube: Diameter 10-16 mm, Height 55-100 mm Barcode type: 2/5 interleaved, UPC A & E, 2/5 IATA, 2/5 Industrial, EAN 8 of 13, Code 128, EAN 128, Pharmacode, EAN addendum, 2 of 5, Code-a-bar Capacity: Maximum 240 sample tubes Capacity: 4 separate incubators Temperature range: 5°C above room temperature to 50°C Accuracy: ± 1°C average of the plate Consistency: ± 0.7°C/whole plate Shaking: Lengthwise Capacity: Up to 4 wash buffers Wash head: 1 x 8 Pipette volume: 200 – 2500 µl/well, depending on the assay Precision: ± 5% CV at 300 µl Residual volume: < 2.5 µl in round-bottom wells, < 4 µl for flat-bottom wells Level sensor buffer: Yes Level sensor waste container: Yes Wash programs: 1 to 9, depending on the assay Incubation time: 1 to 999 seconds, depending on the assay Pipette pressure: Adjustable for each assay individually Measurement: Vertical with photodiodes, Extinction or kinetic measurement Channels: 8 Operation: Single or double, with second measurement when the measuring range is exceeded Spectrum: 400 – 700 nm Filter: Up to 8 positions are available, of which 5 are already on board (405, 450, 492, 550, 620 nm) Measurement time: < 10 seconds Dynamic range: – 0.100 to 3,000 absorption units Linearity: 0 –2,000 absorption units ± 1.0% Precision: ± 0.005 absorption units or 2.5% Dimensions (WxDxH): 1130 x 760 x 1000 mm Weight: 130 kg

This Varian CP-3800/3380 Gas Chromatograph GC System &amp; Model 8400 Autosampler was removed from a (more) university lab where it was surplus to requirements. The information plate suggests this system was built in 2004. The GC powered on and completed self-calibration with no issues. The oven was tested at 200C and measured at that with our digital thermometer (thermometer not included in the sale). The autosampler also powered on with the main unit and went through self-calibration. It was not tested further. It is in good condition with only minor marks from use.

FluidX Perception Barcoded Tube Reader with Accessories This was removed from a university lab wher (more)e it was surplus to requirements. FluidX Perception Barcoded Tube ReaderPN - 20-4001SN - 5086-F834-FC-52BE-7245The glass side has a corner cracked off.Powers on via USB FluidX Scope USB ReaderPN - FLX-20-1003SN - 1003-1216-005Powers on via USB FluidX Intellicode Set up Software (Dongle) Version 9.2.1.918(R) Apart from the glass, the item is in good cosmetic condition. Other parts/accessories:- Torrey Pines RHB20SN - 40000081Holds 96 x 0.2mlPowers on Tubes/Racks1 x Rack - 96 x 0.7ml Thread Tube with 2D Code (68-0700-12N, 978102)1 x Rack - 24 x 6ml Jacketed PP Tubes (66-9201)Pack of 5 Racks (96 tubes per rack) 2D Coded (size not specified, pack is sealed)2 x Yellow Racks with 96 x 0.2ml tube holes1 x Blue Rack with 96 x 0.2ml tube holes1 x Yellow Rack with 24 x 2ml tube holes Computer Interface CableAC Adaptor

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Orbital shaker with Ohaus incubator and cooling The innovative OHAUS incubating cooling shakers are  (more)designed to have a wide temperature range from 10°C below ambient up to 65°C to ensure accurate and repeatable results. All models feature independent displays with intuitive controls and include safety features to protect both the operator and the sample. These rugged laboratory instruments have triple eccentric drive systems for stable orbital motion and are equipped with integrated chip control for reliable shaking. - Prepared for the use of microplates, without the need for accessories, and can easily accommodate modular blocks thanks to the block adapter supplied. - User-controlled temperature calibration function for sensitive applications. Digital control for an adjustable and repeatable shaking speed. - The innovative design with Peltier system, for direct contact between plate and sample, ensures rapid and uniform heating and cooling precision. Applications Immunological analyzes, hybridizations, cell cultures, suspensions and bacterial and yeast cultures, ELISA tests, PCR, enzymatic reactions Display Independent LED displays with temperature, speed and time information are easy to read and allow the operator to view all settings simultaneously Operation Detachable three-wire cable and plug (included) Structure Die-cast aluminum structure with polycarbonate cover and brushless DC motor Construction features Splash resistant construction, overload protection and hot warning indicator Technical Specifications - ISICMBCDG - Calibration: temperature calibration - Transmission System: Brushless DC Motor; triple Eccentric - Safety Certification: CE; TUV - Speed ​​Accuracy: ±2% - Speed ​​range: 100 to 1,200 rpm - Timer: 1 second to 160 hours - Tray structure: aluminum

This high-capacity tape coverslipper can cover up to 1260 slides per hour, thanks to a flexible mech (more)anical process.

Crest P2600D-45 Digital Ultrasonic Cleaner w/ Power ControlFeatures - Ceramically enhanced transduce (more)r technology with industrial bonded assembly - Homogenous sound field, energy distribution, and prevention of standing waves using frequency sweeping - Adjustable cleaning time or ability to set for continuous operation - Adjustable bath temperature between 20°C to 80°C - "D" models feature an adjustable ultrasonic power in nine steps, along with a Degas function for consistent sample prep applications - Deep-drawn stainless steel cleaning tank with rounded corners for easy cleaning - Intrinsically safe heater with dry-run protection - Drain valve assembly available for tank capacities of 2.5 gallons or higher 45 kHz and 132 kHz frequencies provide precision cleaning and rinsing options, with 132 kHz available for enhanced sample preparation performance All models feature digital display of temperature and time, with "D" models featuring digital display of the ultrasonic power level Efficiently removes flux from PCB's, fats, paints, surface rust, lime, oils, adhesives, polish residues, chemical residues, dust, and much more The Crest P2600D-45 Digital Ultrasonic Cleaner w/ Power Control is a state-of-the-art cleaning solution designed for superior performance and efficiency. Featuring ceramically enhanced transducer technology with industrial bonded assembly, it ensures a homogenous sound field and even energy distribution through frequency sweeping at 45 kHz. This cleaner offers adjustable cleaning time from a few minutes to continuous operation and an adjustable bath temperature between 20°C to 80°C. The "D" model includes adjustable ultrasonic power in nine steps and a Degas function for consistent sample preparation. Its deep-drawn stainless steel cleaning tank has rounded corners for easy cleaning, and the intrinsically safe heater includes dry-run protection. With a tank capacity of 7 gallons (26.1 liters) and an average ultrasonic power of 300 watts, it is ideal for larger cleaning tasks. Additionally, it features a convenient drain valve assembly for tanks with capacities of 2.5 gallons or higher, enhancing usability and efficiency. INCLUDED: The Crest P2600D-45 Digital Ultrasonic Cleaner w/ Power Control includes: - Tank Cover - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty