Bruker 450-320 GCMS

Varian 4000 GC/MS/MS Gas Chromatograph Included: Varian 3800 / 3380 MS4000 mass spectrometer Without (more) auto sampler Without Software Without a computer Untested equipment A few lines on the screen (see photos)

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Reason for return - Investigate faults and re-list accordingly: - We received the item with a cracke (more)d glass piece to the photoionization detector. We replaced it with a piece that was provided. - We piped the system with N2 carrier gas and gas lines carrying product to the inlet of the GC. We turned on the switch to the Photoionization detector, under high sensitivity, and can visibly see it turn on. The source is aligned. The detector is aligned.  - We programmed the event on the software to turn the valve of the 10-way valve accordingly to enable the carrier gas to bring the product through the GC. - We introduced acetone via the sample loop (inlet gas) - we saw no peaks. We introduced acetone via injection - we saw no peaks.  - I leaked checked the piping including within the detector - no issues. I checked the point of outlets to make sure flow is continuous too - no issues. - The mechanism of the valve turning - it made a cranky sound, and I am not convinced it is turning the valve.  - There may be two issues. I had figured it was the valve so I tried injecting acetone directly into the line, but we could not see any peak of acetone. (Issues with the detector?) I am not sure if the valve's squeaking/cranky sound implies it is turning but there might be an issue here too. This SRI 8610C GC Gas Chromatograph System was removed from a university lab where it was surplus to requirements. The unit powers up but we were unable to test it further at our facility. The lab did confirm however, that is in good working order. It is in very good cosmetic condition with only very minor marks from use.

This Hewlett Packard HP 6890 Series GC System was removed from a university lab where it was surplus (more) to requirements. The unit has been powered up but not tested further at our facility. The lab said it had been serviced in May 2022 and so should be in good working order. Included are; 1 x Hewlett Packard HP 6890 Series GC SystemG1540A 1 x HP GC AutosamplerG1512AX 1 x Agilent 6890 Series InjectorG1513A 1 x Hewlett Packard 5973 MassSelective Detector. Accessories: Cables: 1x 9pin FEMALE to FEMALE RS232 Cable: Part no, G1530-60600•TO6890AAuto Sampler to GC - GC to Data Box (Data Box is missing from system) 1x 9pin MALE to Male RS232 Cable:Part no. G1530-60930Top Remote on GC - Data Box 2x Hewlett Packard Controller Cables:Part no's.• 10833B•10833D

Heating thermostat from 20 to 200°C, with LCD display and simple programming functions LAUDA ECO sta (more)nds out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - Monochrome LCD graphic display for simultaneous indication of actual and set values - The circulation pump can be adjusted to six levels - Integrated programmer: 1 program with max. 20 segments - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The ECO heating thermostat line includes transparent baths up to 100°C and stainless steel up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface - Pump connections with 13mm plastic nipples as standard LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. Grafico delle prestazioni di riscaldamento dei termostati di immersione ECO Silver con vasca in acciaio inox. Performance graph of the pump pressing on the six levels. TECHNICAL VISUALIZATION Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead 1 - Cooling coil connections 2 - Pump connection: outflow and return (as standard only with E 4 S and ET 15 S) 3 - Four feet 1 - Mains connecting lead 2 - Rating label 3 - Bath draining tap 4 - Bath drain point

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

System consists of: Dionex UltiMate 3000 Degasser Dionex UltiMate 3000 Pump Dionex UltiMate 3000 Aut (more)osampler Dionex UltiMate 3000 Column Compartment Dionex UltiMate 3000 Diode Array Detector PC

F2 Mass Standard - knob weights with adjustment chamber - set (1 mg - 1 kg), wooden box Number of pi (more)eces in the set: 25 Weights 1 g i 2 g – solid masses without adjusting chamber

Measurement with application of 4 load cells is a guarantee of precise mass reading, regardless of l (more)oad positioning on the weighing platform. The platform scales C315.4 series is made of mild steel powder coated construction of the weighing platform. The platform comprises 4 load cells connected to an terminal PUE C315 series featuring backlit LCD display and 5 function buttons. The weighing platform and the terminal are connected through a long cable enabling hanging the terminal on a wall. The C315.4 series is available in pit version for easy placing heavy loads on the weighing platform without application of ramps. Scales is available in dual range version on surcharge.