IKA C 6000 Package 1/10 Calorimeter global standards

This Perkin Elmer Pyris 1 Differential Scanning Calorimeter System was removed from a university lab (more) where it was surplus to requirements. The unit has been inspected and fully tested by a qualified engineer. It was confirmed to be in full working order, but the dongle for the software is missing. Included with it are; 1 x Perkin Elmer Differential Scanning Calorimeter - Pyris 1Part no. N537-0050 1 x Dell Optiplex PC (SN-MQ4ZP) With PYRIS 1 SOFTWARE1 x Microsoft Mouse1 x Dell Keyboard Model - AT102W (SN-M9801-22017)1 x Norgren Gas Regulator1 x Perkin Elmer Pyris 1 Spares Kit (Wooden box)3 x Perkin Elmer cases with small parts1 x Perkin Elmer Hammer accessory1 x Thermometer on stand Everything is in reasonably good cosmetic condition with some marks from age and use.

This Parr Isoperibol Calorimeter 240 was removed from a university lab where it was surplus to requi (more)rements. The item is in reasonable cosmetic condition but has plenty of marks from use and age. The item powered on fine and we could interact with the control panel without issue. We attempted to run a test print and were met with Error 3800. We are told this is due to the O2 requirement and is not a fault with the system. The system was serviced in 2020 not long before it came to us. We were unable to test it further. Also included are the following:1x Parr 1755 Printer1x Parr/Star Power SupplyModel: AD8340

TA Instruments Nano 6300 DSC Differential Scanning Calorimeter This item was removed from a universi (more)ty where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to conduct further testing at our facility. Specifications: - Model: 6300 - S/N: SNA025377

IKA C 3000 Automated Calorimeter Package 1/12 Measuring Range Max. 40000 J Reproducibility Dynamic ( (more)1g Benzoic Acid NBS39i) 0.15% Reproducibility Isoperibol (1g Benzoic Acid NBS39i) 0.05% Features - Easy handling by touch screen operation or a standard USB mouse - Two different starting temperatures to choose from (22°C, 30°C) - Automatic ignition, automatic water filling and draining, automatic oxygen filling - Several interfaces: Ethernet, RS 232, USB, SD card slot - Six temperature sensors to monitor all temperatures allowing best analyses - Spherically shaped decomposition vessel for better pressure stability and faster heat transfer - Easy sample preparation due to new upside down crucible holder technology - Can be operated with a chiller (e.g. RC 2 basic) The IKA C 3000 Automated Calorimeter Package 1/12 combines cutting-edge technology and user-friendly design to deliver precise calorific value measurements with exceptional efficiency. Featuring a responsive touch screen interface and the option to operate via a standard USB mouse, this calorimeter simplifies complex workflows. Its fully automated systems for ignition, water filling and draining, and oxygen filling reduce manual intervention, making it ideal for laboratories with demanding analysis requirements. With the ability to choose between two starting temperatures (22°C and 30°C), the C 3000 adapts to a variety of experimental setups for maximum flexibility. Engineered for accuracy and performance, the C 3000 offers up to six dynamic measurements per hour with a reproducibility of 0.15% RSD and four isoperibol measurements per hour with an impressive reproducibility of 0.05% RSD. The spherically shaped decomposition vessel enhances pressure stability and accelerates heat transfer, ensuring reliable results every time. Six integrated temperature sensors continuously monitor all critical parameters, while the innovative upside-down crucible holder simplifies sample preparation. With support for cooling via a compatible RC 2 Basic chiller, this calorimeter ensures consistent performance even during high-throughput workflows. The IKA C 3000 excels in connectivity and data management, featuring interfaces such as Ethernet, RS232, USB, and an SD card slot. Built for durability, it operates within a working temperature range of 22 to 30°C and meets rigorous international standards, including ASTM, ISO, and DIN specifications. Compact yet robust, with dimensions of 19.7 x 16.7 x 17.7 inches and a weight of 63.9 pounds, the C 3000 fits seamlessly into laboratory environments. With its advanced automation, exceptional precision, and versatile capabilities, the IKA C 3000 Automated Calorimeter Package 1/12 is the perfect solution for laboratories focused on quality and efficiency. INCLUDED: The IKA C 3000 Automated Calorimeter Package 1/12 includes: - C 3000 Measuring Cell - C 6012 Decomposition Vessel, Halogen Resistant - RC 2 Basic Recirculation Chiller - Wear Parts and Consumables for Up to 500 Tests - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA C 3000 Automated Calorimeter Package 2/10 Measuring Range Max. 40000 J Reproducibility Dynamic ( (more)1g Benzoic Acid NBS39i) 0.15% Reproducibility Isoperibol (1g Benzoic Acid NBS39i) 0.05% Features - Easy handling by touch screen operation or a standard USB mouse - Two different starting temperatures to choose from (22°C, 30°C) - Automatic ignition, automatic water filling and draining, automatic oxygen filling - Several interfaces: Ethernet, RS 232, USB, SD card slot - Six temperature sensors to monitor all temperatures allowing best analyses - Spherically shaped decomposition vessel for better pressure stability and faster heat transfer - Easy sample preparation due to new upside down crucible holder technology - Can be operated with a chiller (e.g. RC 2 basic) The IKA C 3000 Automated Calorimeter Package 2/10 is an advanced isoperibol calorimeter engineered to deliver precise calorific value measurements with exceptional ease of use. Featuring touch screen control or the option to operate with a standard USB mouse, this calorimeter simplifies workflow while maintaining accuracy. Fully automated processes, including ignition, water handling, and oxygen filling, significantly reduce preparation time and user intervention, making it an ideal choice for both industrial and research laboratories. Designed for flexibility and efficiency, the C 3000 allows users to select between two starting temperatures (22°C and 30°C) and offers up to six dynamic or four isoperibol measurements per hour. With six temperature sensors ensuring precise monitoring, a spherically shaped decomposition vessel for superior pressure stability and heat transfer, and the innovative upside-down crucible holder technology for easy sample preparation, the C 3000 delivers consistent and reproducible results. It achieves 0.15% RSD in dynamic mode and 0.05% RSD in isoperibol mode, ensuring accuracy for high-stakes analyses. Equipped with multiple connectivity options—including Ethernet, RS232, USB, and an SD card slot—this calorimeter streamlines data management and integration. Compatible with the RC 2 Basic Recirculating Chiller (sold separately), it ensures optimal cooling efficiency during extended use. With compact dimensions of 19.7 x 16.7 x 17.7 inches and a robust weight of 63.9 pounds, the IKA C 3000 Automated Calorimeter Package 2/10 is built for reliability and performance in demanding laboratory environments. This package includes the C 3000 measuring cell, a C 6010 standard decomposition vessel, and wear parts and consumables for up to 500 tests, ensuring a seamless start to your calorimetric operations. INCLUDED: The IKA C 3000 Automated Calorimeter Package 2/10 includes: - C 3000 Measuring Cell - C 6010 decomposition Vessel, Standard - Wear Parts and Consumables for Up to 500 Tests - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA C 6000 Automated Calorimeter Global Standards Package 1/12 Measuring Range Max. 40000 J Reproduc (more)ibility Dynamic (1g Benzoic Acid NBS39i) 0.15% Reproducibility Isoperibol (1g Benzoic Acid NBS39i) 0.05% Features - Automatic ignition and ignition energy determination - Automatic water filling and draining - Automatic oxygen filling, venting and flushing - RFID technology for automatic decomposition vessel identification - New design of the decomposition vessel allowing easier and faster sample preparation - Easy and convenient capacitive touch screen operation - Control chart view and correction calculation of globally used standards - Ethernet interface to connect a network printer - USB interface allowing easy data management and software updates - The Package 1/12 includes a halogenresistent decomposition vessel C 6012 with catalytically active surface leading to higher recovery rates on halogens and sulfur The IKA C 6000 Package 1/12 Calorimeter sets a new benchmark in calorimetry with cutting-edge automation, precision, and versatility. Designed to operate across adiabatic, isoperibolic, and dynamic modes, it offers unmatched flexibility for laboratories with varying analytical needs. With three starting temperature options (22°C, 25°C, 30°C) and compliance with global standards such as DIN, ISO, ASTM, GOST, and GB, this calorimeter ensures robust and reliable performance. The redesigned halogen-resistant C 6012 decomposition vessel features a catalytically active surface, enhancing recovery rates for halogens and sulfur while improving sample preparation efficiency and reducing measurement time. Engineered for seamless integration into laboratory workflows, the C 6000 Package 1/12 comes equipped with multiple interfaces, including Ethernet, USB, and RS232, along with RFID technology for automatic decomposition vessel identification. Its capacitive touchscreen ensures effortless operation and quick navigation, while features like automatic ignition, water filling, oxygen filling, and degasification streamline routine processes. Advanced control chart capabilities and calorific value correction calculations provide precision and adherence to globally recognized standards, making it an indispensable tool for achieving reproducible results. This advanced calorimeter package includes the RC 2 Basic Circulating Chiller, ensuring precise temperature control and optimized performance for high-throughput applications. The innovative spherically shaped decomposition vessel enhances heat transfer and measurement efficiency, while the unit's robust build ensures long-term reliability. Whether for research, industrial applications, or academic use, the IKA C 6000 Package 1/12 offers exceptional adaptability, precision, and automation, making it a premier choice for modern calorimetric analysis. INCLUDED: The IKA C 6000 Automated Calorimeter Global Standards Package 1/12 includes: - C 6012 Decomposition Vessel, Halogen Resistant - RC 2 Basic Circulating Chiller - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

New generation! The OHAUS Scout Scale, with its large backlit LCD display and integrated educational (more) software is the ideal tool for use in the classroom. Offering world-class overload protection, fast stabilization times, increased capacity, more connection options, and a stackable design—the ultimate educational weighing experience. - Excellent overload protection and practical stackable design - Backlit LCD display and 4-button operation: very easy to use in all conditions - High weighing speed and high resolution display The OHAUS Scout scale can be equipped with various connectivity options: RS232, USB, USB device, Ethernet or Bluetooth®. These options ensure a more modern and smarter student experience, increasing accuracy and efficiency. Other Standard Features and Equipment Transport lock, stainless steel weighing pan, menu and adjustment lockout switch, software and mechanical overload/underload protection, stability indicator, auto tare, low battery indicator, auto power off user selectable print options and communication settings. Applications Weighing: allows you to calculate the weight of the samples in the selected unit of measure. Density determination: calculation of the density of solids or liquids. With the built-in weigh below hook, you can test for the specific gravity of objects that cannot be placed on the weighing pan. Molar Concentration: Calculate the mass of a sample and automatically convert to the molar concentration. MODELS AVAILABLE: Applications Weighing, determination of density, weighing of moles Screen Liquid crystal display (LCD) with backlight Operation AC adapter (included) or 4 AA batteries (not included) Communication RS232, USB host, USB device, Ethernet or Bluetooth™ (available as an accessory) Construction ABS housing, stainless steel bowl, ABS draft shield (1 mg model only), bottom weigh hook, transport lock, manual calibration lock switch, security slot Project features Stability indicator, stackable design with storage lid included (excluding 1 mg model), mechanical and software over/underload protection, low battery indicator, auto power off, auto tare, span calibration mass included in models with capacity up to 620 g NO MORE BROKEN SCALES! The excellent overload protection of the Scout balance consists of a weighing pan made of high-strength stainless steel and a pan support made of impact-resistant plastic. The system allows the balance to safely support loads up to 10 times its rated capacity, withstanding use in even the most demanding educational environments. In addition, the integrated transport lock protects the load cell from damage during transport, stacking and storage.

Heidolph Coated Glassware Set G3B Vertical condenser for all standard distillations; the option with (more) the smallest space requirement - With transparent plastic coating - suitable for a temperature range up to max. 80 ° C - Glassware set includes one 1,000-ml evaporating flask and one 1,000-ml receiving flask - Evaporating flasks and vapor tubes which come with a standard NS 29/32 joint size are also available with NS 24/29 ground joints - Ventilation cap without ground joints for easy handling and grease-free operation included - A venting valve with refill function is optionally available - Suitable for the automated distillation program Dynamic AUTOaccurate on Hei-VAP Expert / Ultimate Control models - Also available upon request: glassware sets for Soxhlet extraction and descending condenser system INCLUDED: The Heidolph Coated Glassware Set G3B includes: - G3B Vertical Glassware - 1 Liter Receiving Flask - 1 Liter Evaporating Flask - Ventilation Cap - Full 3 Year Manufacturer's Warranty

PELTIER LABORATORY INCUBATORS ILP SMART POL-EKO ILP - REFRIGERATION WITH PELTIER TECHNOLOGY ILP incu (more)bators are innovative and ecological instruments, which use the Peltier system to cool the internal chamber. They maintain a constant temperature from 0°C to 70°C, being able to drop to a maximum of 20°C below the ambient temperature. Cooling with Peltier technology gives these instruments multiple advantages: they are silent, vibration-free, precise and ecological. And then: large touch display, programming, alarms, lock, stainless steel interior and much more. Continue reading and discover all the other amazing features of these incubators! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ILP SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Double door: solid external; glass interior - Interior in acid-resistant stainless steel according to DIN 1.4301 - Insulated door with lock - Protection class 2.0 - Protection class 3.3 (DIN 12880) as option - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor PELTIER TECHNOLOGY: SIMPLE AND RELIABLE The Peltier cell refrigeration system is a modern technology used in various refrigeration or heating instruments, thanks to its innate versatility. The strengths of Peltier technology are the scalability of the cooling elements, the possibility of operating anywhere, its reliability and precise power control. Furthermore, the Peltier elements work without moving parts and therefore without vibrations or noise. One of the main advantages compared to traditional compressors is that no flammable or environmentally harmful refrigerants are used and in general, the whole system is much simpler, avoiding breakdowns. To find out more, we recommend the Wikipedia page Thermoelectric cooler. In particular, for incubation, Peltier cells bring several advantages: Zero vibration - Through the use of Peltier cells, the vibrations previously generated by the compressor are eliminated. Minimal fluctuation and variation: excellent fluctuation, variation and short time to reach the set temperature. Lighter design with more space: Peltier cooling system reduces the overall size of the instrument and its weight. Ecological: Peltier technology is simple and does not use substances harmful to the environment. Below are simple operating diagrams of the ILP incubators during cooling and heating. ILP SMART SERIES The ILP series with Peltier cooling offers you four models, from 56 to 749 liters of internal volume. The models are available with two different external finishes: in light gray powder-coated sheet metal with a graphite top panel or completely in stainless steel, with a linen-like texture. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Access port for external sensor 3 - Temperature sensor 4 - Internal glass door 5 - Adjustable feet 6 - Stainless steel shelf 7 - Solid external door 8 - Peltier module fans 9 - Door open sensor 10 - Touch screen control panel 11 - USB port 1 - Main switch 2 - Spacer 3 - External fans of the Peltier module 4 - LAN port 5 - Fuse 6 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Door with viewing window - Stainless steel shelf - Perforated shelf - Stainless steel basins - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.1 according to DIN 12880 - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20mm access door - Additional 30 mm access door

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.