IKA C 6000 Automated Calorimeter Global Standards Package 2/12

This Parr Isoperibol Calorimeter 240 was removed from a university lab where it was surplus to requi (more)rements. The item is in reasonable cosmetic condition but has plenty of marks from use and age. The item powered on fine and we could interact with the control panel without issue. We attempted to run a test print and were met with Error 3800. We are told this is due to the O2 requirement and is not a fault with the system. The system was serviced in 2020 not long before it came to us. We were unable to test it further. Also included are the following:1x Parr 1755 Printer1x Parr/Star Power SupplyModel: AD8340

IKA C 200 auto Semi-Automated Calorimeter w/ Automated Water Handling Measuring Range Max. 40000 J M (more)easuring Time Dynamic Approx. 8 min Cooling Medium Permissable Operating Pressure 2 bar Features - Compact, space-saving, and cost-effective design for educational and low-volume industrial laboratories - Capable of measuring calorific values for liquid and solid samples - Four operation modes: isoperibol, dynamic, manual, and time-controlled (14 min). - Semi-automated system with manual water and oxygen handling, and optional automation available - Closed-loop water circulation with optional RC 2 basic chiller for improved reproducibility and efficiency - Operated via C 6040 CalWin software for monitoring, multi-calorimeter management, and data export - Compatible with DIN 51900, ISO 1928, ASTM D240, ASTM D4809, ASTM D5865, ASTM D1989, ASTM D5468, ASTM E711, GOST 147, GOST 21261 - Compact dimensions (15.7 x 15.7 x 15.7 in.) and lightweight (46.3 lb.) for ease of installation - Installation and calibration consumables included for seamless setup The C 200 auto package allows operating the C 200 with a completely automated water cycle. This results in ease of handling and saves valuable time especially for laboratories with a low number of analyses. The water circulates in a closed loop and is kept at a constant temperature by using a recirculating chiller. This leads to shorter preparation time for each experiment and even better reproducible results. The semi-automated and conforming to standards combustion calorimeter determines the gross calorific value of liquid and solid samples. So far it has mainly been used for teaching and training purposes at technical schools and universities. Due to the automated water handling it is now also suitable for industrial laboratories with low number of analyses. Four different operation modes enable the user to control the measuring times according to individual requirements: Isoperibol: approx: 17 min. Dynamic : approx. 8 min Manual : approx. 17 min (depends on the operator) Time controlled : 14 min Measurements are possible according to e.g. DIN 51900, ISO 1928, ASTM D240, ASTM D4809, ASTM D5865, ASTM D1989, ASTM D5468, ASTM E711. The software C 6040 Calwin controls the unit and monitors the measurement of the samples. Additionally, collected data can be exported to e.g. Excel, Word, SQL and LIMS for further analysis. It is possible to operate several calorimeters with one PC. A PC is not part of the scope of delivery and needs to be provided by the operator. Calwin is sold separately. INCLUDED: The IKA C 200 auto Semi-Automated Calorimeter w/ Automated Water Handling includes: - C 200 Measuring Cell - C 5010 Decomposition Vessel - C 248 Oxygen Filling Station - RC 2 Basic Recirculating Chiller - Ignation Adapter - Water Emptying Hose - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA C 200 h auto Semi-Automated Halogen Resistant Calorimeter w/ Automated Water Handling Measuring  (more)Range Max. 40000 J Measuring Time Dynamic Approx. 8 min Cooling Medium Permissable Operating Pressure 2 bar Features - Compact, space-saving, and cost-effective design for educational and low-volume industrial laboratories - Capable of measuring calorific values for liquid and solid samples - Four operation modes: isoperibol, dynamic, manual, and time-controlled (14 min). - Semi-automated system with manual water and oxygen handling, and optional automation available - Closed-loop water circulation with optional RC 2 basic chiller for improved reproducibility and efficiency - Includes C 5012 decomposition vessel, suitable for high-halogen and sulfur samples (3%) - Operated via C 6040 CalWin software for monitoring, multi-calorimeter management, and data export - Compatible with DIN 51900, ISO 1928, ASTM D240, ASTM D4809, ASTM D5865, ASTM D1989, ASTM D5468, ASTM E711, GOST 147, GOST 21261 - Compact dimensions (15.7 x 15.7 x 15.7 in.) and lightweight (46.3 lb.) for ease of installation - Installation and calibration consumables included for seamless setup The IKA C 200 h auto Semi-Automated Halogen Resistant Calorimeter w/ Automated Water Handling allows operating the C 200 with a completely automated water cycle. This results in ease of handling and saves valuable time especially for laboratories with a low number of analyses. The water circulates in a closed loop and is kept at a constant temperature by using a recirculating chiller. This leads to shorter preparation time for each experiment and even better reproducible results. The semi-automated and conforming-to-standards combustion calorimeter determines the gross calorific value of liquid and solid samples. So far it has mainly been used for teaching and training purposes at technical schools and universities. Due to the automated water handling it is now also suitable for industrial laboratories with low number of analyses. The catalytic activated, halogen resistant decomposition vessel C 5012 is specifically designed for the combustion of samples that contain halogens and sulfur ( 3 % ). The material of the decomposition vessel (Hastelloy) prevents corrosion caused by samples with high chlorine content. The catalytic activated inner-surface leads to higher recovery rates in case analysis of halogens and/or sulfur is required after the combustion. Four different operation modes enable the user to control the measuring times according to individual requirements: Isoperibol: approx: 17 min. Dynamic : approx. 8 min Manual : approx. 17 min (depends on the operator) Time controlled : 14 min Measurements are possible according to e.g. DIN 51900, ISO 1928, ASTM D240, ASTM D4809, ASTM D5865, ASTM D1989, ASTM D5468, ASTM E711. The software C 6040 CalWin controls the unit and monitors the measurement of the samples. Additionally, collected data can be exported to e.g. Excel, Word, SQL and LIMS for further analysis. It is possible to operate several calorimeters with one PC. A PC is not part of the scope of delivery and needs to be provided by the operator. CalWin is sold separately. INCLUDED: The IKA C 200 h auto Semi-Automated Halogen Resistant Calorimeter w/ Automated Water Handling includes: - C 5012 Decomposition Vessel, Halogen Resistant - C 200.2 Conversion Kit for C 5012 - C 200.RC Set of Hoses - RC 2 Basic Recirculating Chiller - C 248 Oxygen Filling Station - Ignation Adapter - Water Emptying Hose - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA C 6000 Automated Calorimeter Global Standards Package 2/10 Measuring Range Max. 40000 J Reproduc (more)ibility Dynamic (1g Benzoic Acid NBS39i) 0.15% Reproducibility Isoperibol (1g Benzoic Acid NBS39i) 0.05% Features - Automatic ignition and ignition energy determination - Automatic water filling and draining - Automatic oxygen filling, venting and flushing - RFID technology for automatic decomposition vessel identification - New design of the decomposition vessel allowing easier and faster sample preparation - Easy and convenient capacitive touch screen operation - Control chart view and correction calculation of globally used standards - Ethernet interface to connect a network printer - USB interface allowing easy data management and software updates The IKA C 6000 Automated Calorimeter Global Standards Package 2/10 sets a new standard in calorimetry, offering unparalleled automation, precision, and adaptability. Capable of operating in adiabatic, dynamic, and isoperibol modes, it supports three selectable starting temperatures (22°C, 25°C, 30°C) to accommodate diverse laboratory needs. With a maximum measuring range of 40,000 J and exceptional reproducibility (0.05% RSD in adiabatic and isoperibol modes), this instrument complies with leading global standards, including DIN, ISO, ASTM, and GB, ensuring consistent and accurate results. The calorimeter features advanced automation, including automatic ignition, water filling, oxygen management, and degasification, all controlled via a capacitive touchscreen for intuitive operation. RFID technology ensures precise decomposition vessel identification, while the redesigned vessel allows for faster sample preparation and shorter measurement times. Additional functionality, such as control chart views and correction calculations, ensures strict adherence to globally accepted standards. Seamless integration into laboratory workflows is achieved through versatile connectivity options, including Ethernet, RS232, and USB interfaces, enabling effortless data management and compatibility with LIMS systems. While the RC 2 basic chiller is compatible with this system for enhanced temperature control, it is not included in the Package 2/10. Built for rigorous demands, the IKA C 6000 is ideal for laboratories requiring accuracy, automation, and compliance in calorimetry. INCLUDED: The IKA C 6000 Automated Calorimeter Global Standards Package 2/10 includes: - C 6010 Decomposition Vessel, Standard - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA C 6000 Automated Calorimeter Global Standards Package 2/12 Measuring Range Max. 40000 J Reproduc (more)ibility Dynamic (1g Benzoic Acid NBS39i) 0.15% Reproducibility Isoperibol (1g Benzoic Acid NBS39i) 0.05% Features - Automatic ignition and ignition determination - Automatic water filling and draining - Automatic oxygen filling, venting and flushing - RFID technology for automatic decomposition vessel identification - New design of the decomposition vessel allowing easier and faster sample preparation - Easy and convenient capacitive touch screen operation - Control chart view and correction calculation of globally used standards - Ethernet interface to connect a network printer - USB interface allowing easy data management and software updates - This Package 2/12 includes a halogen resistant decomposition vessel C 6012 with catalytically active surface leading to higher recovery rates on halogens and sulfur The IKA C 6000 Automated Calorimeter Global Standards Package 2/12 sets a new benchmark in precision and efficiency for modern calorimetry. This advanced system operates seamlessly across adiabatic, isoperibolic, and dynamic measuring modes, offering flexibility to suit diverse laboratory requirements. Users can select from three starting temperatures (22°C, 25°C, 30°C) to optimize measurements, all while adhering to globally recognized standards such as DIN, ISO, ASTM, and GB. Featuring a redesigned decomposition vessel, this package enhances sample preparation efficiency and recovery rates for halogens and sulfur, thanks to its catalytically active, halogen-resistant surface. Please note that while this system is compatible with the RC 2 Basic Chiller for optimal cooling performance, the chiller is not included with this package. Streamlined automation defines the C 6000, incorporating automatic ignition, oxygen filling, and water handling for effortless operation. The capacitive touchscreen ensures intuitive navigation, while the built-in RFID technology provides automatic identification of decomposition vessels for enhanced accuracy. With robust data management capabilities via Ethernet, USB, and RS232 interfaces, this calorimeter simplifies integration into existing workflows and supports comprehensive analysis. The included control chart view and correction calculation features further reinforce compliance with globally applied standards. This Package 2/12 includes the halogen-resistant decomposition vessel C 6012, making it ideal for laboratories demanding high precision in sulfur and halogen analysis. Compact and efficient, with dimensions of 19.7 x 16.7 x 17.7 inches and a weight of 88.5 lbs, the IKA C 6000 ensures optimal performance within a permissible temperature range of 20°C to 30°C. Whether for research, industrial, or quality control applications, this package delivers the reliability and adaptability necessary for advanced calorimetry. INCLUDED: The IKA C 6000 Automated Calorimeter Global Standards Package 2/12 includes: - C 6012 Decomposition Vessel, Halogen Resistant - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA C 6040 Calwin Calorimeter Software The IKA C 6040 Calwin Calorimeter Software is an advanced PC- (more)based solution designed to streamline data management and control across multiple calorimeters. Compatible with IKA models such as the C 6000 global standards, C 6000 isoperibol, C 1, C 200 (Firmware 2.0), C 5000 (Firmware 2.22), and C 2000 (Firmware 2.22), this software provides seamless integration and enhanced functionality. It allows efficient storage, evaluation, and transfer of large datasets directly to laboratory information management systems (LIMS), ensuring compliance with rigorous data management standards. With its intuitive interface, the software offers a clear display of all measurements, results, and connected calorimeters. Features include printing and storage of calibration logs with a control chart view, advanced library and grouping functions with enhanced data filtering options, and correction calculations to determine lower heating values in compliance with ISO, ASTM, DIN, GB, GOST, and other standards. Data can be effortlessly exported into Excel worksheets or csv (ASCII code) files for further analysis, providing versatility and flexibility for laboratory workflows. Designed for use with Windows Vista, 7, 8, 10, and 11, the IKA C 6040 Calwin ensures broad compatibility and ease of use. Weighing just 0.45 kg, it is a lightweight yet powerful tool for modern laboratory environments, offering comprehensive data management and precise calorimeter control. INCLUDED: The IKA C 6040 Calwin Calorimeter Software includes: - DVD with Software and PDF Instructions for Installation - 0003036000 C 5041.10 PC - calorimeter RS 232 connecting cable (3 m) - 0004589500 RS 232 - USB adapter - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

This listing is for a Grant GD120 Stirred Water Bath.The unit is in full working condition and is re (more)ady for immediate release.The Grant GD120 is a state-of-the-art, digitally controlled stirred water bath and immersion thermostat, expertly designed for precise temperature control in sophisticated applications. With capabilities up to 120°C, it is ideal for a variety of laboratory tasks, ensuring accurate temperature management.Key Features:Intelligent Control Optimization (ICO): Utilizes adaptive intelligent PID temperature control for enhanced temperature stability, ensuring consistent results for sensitive experiments.High-Performance Integral Pump: Features a powerful pump with a maximum flow rate of 17 L/min, making it suitable for both immersing samples and circulating temperature-controlled fluid to external devices.Convenient Timer Function: Built-in timer for tracking reaction times and ensuring precise experimental control.Variable High-Temperature Alarm: Set alarms for deviations in temperature, providing peace of mind for critical experiments.User-Friendly Interface: Simple rotor plus two keys allows for quick access to an interactive setup interface, ensuring fast and accurate configurations.Clear Digital Display: Easy-to-read display provides instant reassurance of temperature status from a distance.Visual and Audible Alarms: Alerts users when attention is required, enhancing safety and monitoring.Operating Setpoint and Presets: Allows for one adjustable operating setpoint plus three user-defined preset temperatures for added convenience.User Calibration Facility: Ensures optimum accuracy at the required operating temperature.Safety Features: Includes low liquid protection via a float switch and adjustable over-temperature cut-out to safeguard your samples and workspace.Temperature Specifications:Temperature Range: Ambient +5 to 99°C with a plastic (P) tank, -15 to 120°C with a stainless steel (S) tankStability: ±0.02°C, ensuring precise temperature control for sensitive experiments.Heater Power Limitation: The temperature range and heater power are automatically limited based on the selected liquid type.Applications:Thermal Reactions: Ideal for experiments requiring precise thermal control, such as enzyme assays or chemical reactions.Sample Preparation: Perfect for warming samples or maintaining temperature during biological experiments.Calibration and Testing: Useful for calibrating thermometers or testing the performance of temperature-sensitive equipment.

A laboratory oven with an exceptional quality/price ratio! 100% Made in Italy and with all accessori (more)es already included as standard.Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:     - External structure in steel painted with anti-acid epoxy powder    -  Inner chamber in 18/8 stainless steel     - Ergonomic handle, easy to use and robust INSTRUMENT SAFETY SYSTEM The oven has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of °C (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. STANDARD:     - PID thermoregulator with double display and adjustable temperature up to 300°C    -  2 shelves     - pipe on the back for exhaust fumes with front opening/closing adjustment device     - 10 mm hole on the upper side     - Digital timer from 0 to 99 hours and 59 minutes + ∞     - Indication of the power used     - Auto-tuning (automatic temperature calibration)     - Possibility of manual temperature correction (e.g. with certified thermometer)     - Safety class DIN 3.1, the highest     - Manual adjustment of the over-temperature alarm     - IP protection: 42 Laboratory Oven STF-N 52 FALC Natural Convection

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

Scale WPY for statistic control WPY/PGC is equipped with modules that put packed products control in (more)to practice. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after controlling pre-defined quantity of packages (samples). Number of the packages is fixed by scale program depending on product batch size. Scales are equipped with 5,7" colourful, graphic touch screen display for previewing information concerning currently performed control and its result. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for prepacked products control report. The report is automatically saved in scale memory and at the same time it can be printed by printer connected to scale. Scale coupling with computer program enables: keeping weighing records from successive weighments in the database, automatic printout of control processes from computer software level, sending user defined codes from scale to computer software; the codes match weighed product (product code, operator code, batch quantity, batch no., control Start/Stop), defining product codes and their descriptions (names) from the level of computer program, therefore user can assign an individual product name suitable for the company's branch. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).

Temperature range: -50°C to -85°C Capacity: 691 L Interior dimensions (HxDxW): 1280 x 620 x 880 mm D (more)imensions (HxDxW): 1975 x 920 x 1210 mm Weight: 376 kg