Radwag Suction pump for liquids

The OHAUS Explorer Analytical Balance Series combines innovative functionality and design elements t (more)o deliver unrivalled functionality in a line of high-performance balances that is unique on the market. These are intelligent and intuitive balances, complemented by a series of innovative features that simplify even the most complex laboratory measurements. Applications Weighing, Parts Counting, Percent Weighing, Checkweighing, Animal/Dynamic Weighing, Filling, Totalization/Statistics, Formulation, Differential Weighing, Density Determination, Peak Hold, Ingredient Costing, Pipette Adjustment, SQC Display 5.7" (145 mm) Full-color VGA graphic touchscreen display with user-controlled brightness Operation AC adapter (included) Communication RS232 and USB (included) or second RS232/Ethernet (accessories sold separately) . GLP/GMP data output with real-time clock. Construction Metal base, ABS top housing, stainless steel pan, glass draftshield with top mounted side doors & flip/sliding top door, illuminated up-front level indicator, weigh below hook, security bracket, calibration lock, 4 touchless sensors, in-use cover Design Features Selectable environmental filters, auto tare, user selectable span calibration points, software lockout and reset menu, user selectable communication settings and data print options, user definable project and user IDs, auto standby, up to 14 operating languages Technical features: Internal Calibration: AutoCal™ - Automatic Screen: Included Lid in use: Included Linearity: ±0.0002g Minimum weight according to (USP, 0.1% typical): 0.16g Repeatability (typical): 0.0001 g Stabilization time: 2 s Tare range: to flow by subtraction

Mettler Toledo SevenMulti With Mettler Toledo RS-P42 and inLab Expert Pro System This system was rem (more)oved from a university where it was surplus to requirement. All units are in good cosmetic condition and powered up, we are unable to test them further at our facility. The Printer System has a password that is available on request. The system comprises the following: - Mettler Toledo SevenMulti - Mettler Toledo RS-P42 - Mettler Toledo inLab 731 - Mettler Toledo inLab Expert Pro

DS2208 barcode scanner, as a new generation of LS2208 series, is a response to the tills and retail  (more)outlets need to read barcodes directly from mobile phones' screens and other types of LCD displays. Also the necessity to increase readout speed is fulfilled due to omnidirectional scanning. The device is based on the success of LS2208 1D scanner that has been deployed in millions of locations around the globe. DS2208 barcode scanner provides smooth transition to reading 2D codes while maintaining affordable price without sacrificing performance or functions. Your employees get easy-to-use and best-in-class device that assures point-and-shoot scanning, which is easy to implement and manage. DS2208 scanner, unlike the LS2208, scans almost every market-present code quickly and correctly thanks to the technology of an omnidirectional scanning. Additionally the device identifies on-screen signs displayed by electronic devices, which adds to customer comfort and boosts your marketing and sale possibilities. The scanner reads codes of poor quality with ease, which would be impossible using the LS2208.

RS 232 cable: scale (15-pin connector) – computer (9-pin connector). Cable length: 5 m. Custom (more)ized cable length (extra charge): 2 m, 10 m.

Radwag laboratory holders have been designed to facilitate faster and more convenient weighing. They (more) ensure perfect and safe fixing of small vessels of typical and non-standard shapes. Features: Maximum weighing ergonomics Direct dosing of a sample into a vessel High efficiency, lower costs (minimized potential loss of samples during transfer) Direct dosing of samples into various vessels (test tubes, round flasks, flat flasks, plastic test-tubes, titration vessels) Laboratory holders are compatible with all Radwag analytical balances. Intended use: glass and plastic tubes - ø8, ø10 and ø12 mm

XA100 pipette calibration adapter enables calibration and/or verification of piston pipettes by mean (more)s of a gravimetric method using the XA analytical balence. Set content: base weighing pan weighing vessel evaporation ring glass chamber with an opening for dosing Evaporation ring is an integral part of the adapter that increases relative humidity inside the weighing chamber. With this evaporation of the liquid during calibration/verification is stopped. An integrated weighing pan enables centric loading of the vessel in the weighing chamber. The weighing pan and the vessel are housed in a glass chamber featuring an opening allowing the user to dispense liquid through it, and reducing air drafts. Vessel capacity: 100 ml Adapters for Pipettes Calibration Pipette calibration adapters are intended for calibration and verification of piston pipettes using gravimetric method. Use of the pipette calibration adapter reduces maximum capacity of the balance by the mass of the weighing vessel. The table below, which presents the minimum requirements in accordance with ISO 8655-6:2022 standard, enables to select suitable adapter for pipette calibration and respective balance version. The parameters of the balance have been selected so that the expanded uncertainty of measurement in use is less than ¼ of the maximum permissible error of the test object. Nominal volume of apparatus under test V Resolution (d) mg Repeatability (s)3mg Recommended balance Microbalances Analytical balances 0,5 µl ≤ V < 20 µl 0,001c 0,01d 0,006c, e 0,03d MYA 21.5Y XA 6/21.5Y.M.A XA 6/21.5Y.M XA 21.5Y.M.A XA 21.5Y.M XA 21/52.5Y.M.A XA 21/52.5Y.M XA 53.5Y.M.A XA 53.5Y.M 20 µl ≤ V < 200 µl 0,01 0,025 XA 52.5Y XA 110.5Y XA 82/220.5Y.A XA 82/220.5Y XA 120/250.5Y.A XA 120/250.5Y 200 µl ≤ V ≤ 10 ml 0,1 0,2 Adapter for pipette calibration MY 11 XA 11 XA 11 XA 11 XA 11 XA 17 XA 17 XA 17 XA 100 XA 17 XA 100 Maximum vessel capacity 11 ml 11 ml 11 ml 11 ml 11 ml 17 ml 17 ml 17 ml 100 ml 17 ml 100 ml Weighing vessel mass ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 11 g ~ 11 g ~ 11 g ~ 65 g ~ 11 g ~ 65 g a The repeatability values, in this table, apply in the volumen determination of a single channel pipette. When a single-channel balance is used for volumen determination of single channel pipettes the repeatability values are double the values of this table. c Single-channel balance. d Multichannel balance, only valid for multi-channel pipettes. Multi-channel balances of 0,01 mg readability may be uses to test multi-channel pipettes with nominla volumes below 20 µl only if the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. e For single-channel pipettes of nominal volumes of less than 2 µl, a balance with repeatability better than the values in the table shall be used so that the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. table {font-size: 12px} td {padding:10px; } tr {text-align:center;} @media (max-width: 800px) { table {font-size: 9px} td {padding: 1px 1px} }

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

MARSHALL Select MS-VP200 Chemical Protected Diaphragm Vacuum Pump, 200 mbar Ultimate Vacuum 200 mbar (more) (150 Torr) Pumping Speed 30 L/Min Number of Heads 1 Head Features - Provides clean and uncontaminated air exhaust with a built-in filter - Automatic cooling exhaust system allows for 24-hour continuous use - Customizable vacuum and gas velocity settings for specific applications - TEFLON surface treatment protects against gas corrosion, enhancing durability - Delivers a rapid pumping speed of 30 L/Min for effective operation - Weighs 7.6 kg, making it easy to transport and position The MARSHALL Select MS-VP100 Vacuum Pump is designed for efficient and reliable operation in a variety of laboratory and industrial applications. Featuring an oil-free design with a built-in filter, this vacuum pump ensures clean and uncontaminated air exhaust, making it ideal for environments where purity is crucial. The automatic cooling exhaust system enables continuous 24-hour operation, enhancing productivity and efficiency in demanding settings. The pump's adjustable pressure design allows users to fine-tune the vacuum and gas velocity to meet specific requirements, except for the GM-0.20 model. With a TEFLON surface treatment, the MS-VP100 is highly resistant to gas corrosion, ensuring long-term durability and reliable performance. With an ultimate vacuum of 200 mbar (150 Torr) and a pumping speed of 30 L/Min, the MARSHALL Select MS-VP100 delivers powerful and efficient vacuum performance. It features 6 mm inlet and outlet flanges and operates within a working temperature range of 7°C to 40°C. The pump runs quietly with a noise level of less than 60 dBa, providing a conducive working environment. Its compact design, with dimensions of 21 x 16 x 23.5 cm and a weight of 7.6 kg, makes it easy to integrate into various setups. The pump is equipped with nitrile butadiene rubber valves and requires an electrical supply of AC110/220V, 50/60Hz. The vibrant orange look of the MS-VP100 not only adds a distinctive aesthetic but also signifies its anticorrosive capabilities, making it a reliable choice for diverse vacuum applications.INCLUDED: The MARSHALL Select MS-VP200 Chemical Protected Diaphragm Vacuum Pump, 200 mbar includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA VC 1 Manual Vacuum Control ValveAllows for adjusting the set vacuum value on the manual manomete (more)r. Rod and stand Not included in delivery. INCLUDED: The IKA VC 1 Manual Vacuum Control Valve includes: - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA VC 1 Manual Vacuum Control Valve Specifications Connection diameter suction side8 mmConnection diameter pressure side8 mmInput pressure1 - 1050 mbarDisplayTFTPressure unit / scalembar, hPa, mmHg, TorrControl range1 - 1000 mbarResolution pressure50 mbarMeasurement uncertainty 25 mbarMedium temperature (gas) 5 - 40 °C Venting valveyesMaterial in contact with mediumAl2O3, PP, stainless steelHousing materialPPFasteningstand / clampDimensions (W x H x D)65 x 255 x 140 mmWeight0.6 kgPermissible ambient temperature0 - 60 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 65DC Voltage2x 1.5 V