Radwag PM9501-433RBK10 Barcode Scanner

This DVS Water Vapor Sorption Analyzer System was removed from a university lab where it was surplus (more) to requirements. The system powers on and is in good cosmetic condition. The system was tested with a digital thermometer (not included), but has not been tested further. System includes: CAHN DVS-1 CAHN Digital Recording Balance D-200 DVS Surface Measurement Systems

The OHAUS Explorer Analytical Balance Series combines innovative functionality and design elements t (more)o deliver unparalleled functionality in a line of high performance balances that is unique on the market. These are intelligent and intuitive balances, complemented by a series of innovative features that simplify even the most complex laboratory measurements. Applications Weighing, Piece Counting, Percent Weighing, Check Weighing, Animal / Dynamic Weighing, Filling, Totalization / Statistics, Formulation, Differential Weighing, Density Determination, Peak Hold, Ingredient Costing, Pipette Adjustment, SQC, Statistics Screen 5.7 '' (145 mm) color VGA graphic touchscreen display with user-controlled brightness Operation AC adapter (included) Communication RS232 and USB (included) or second RS232 / Ethernet (accessories sold separately). GLP / GMP data output with real time clock. Construction Metal base, ABS top housing, stainless steel deck, glass draft shield with top mounted side doors and flip / slide top door (1mg models), front illuminated level indicator, weigh below hook, safety bracket , calibration lock, 4 touchless sensors, coverage in use Characteristics of the project Selectable environmental filters, auto tare, user selectable range calibration points, software lock and reset menu, user selectable communication settings and data print options, user definable project and user ID, standby automatic, up to 14 operating languages For further information and technical characteristics, download the attached data sheet.

The 21 CFR Part 11 Compliance Module is a solution especially useful for those users who are obliged (more) to conform to provisions of 21 CFR Part 11 and EU GMP Part 4, Annex 11 regulations. These two documents determine the rules for using electronic records and signatures. Data protection is guaranteed by: advanced password settings, control of logging correctness, various permission levels, data management access, backup, electronic signature, time-defined automatic logout, modification record to Audit Trail file. The module includes "Audit Trail". Audit Trail is a kind of a log where all modifications of balance settings, changes in database records and user activity are recorded. Audit Trail, for example, keeps record of previous and new modifications in databases and informs by whom and when they were introduced. This log allows the administrator to track and find out who logged in, when, who signed a document or who used invalid password. The Audit Trail Reader freeware allows users, upon connection with a balance, to display Audit Trail log and manage it by generating reports of various formats: pdf, xls, csv, html.

It is 50 cm long. It is compatible with HX7 scales.

LS2208 barcode scanner is a manual device designed for operation in adverse industrial conditions. I (more)t integrates with RADWAG terminals, PUE H315, PUE 5, PUE 7.1, HY10, PUE C32, and balances, 5Y, R2, X2, H7. LS2208 is a high quality handheld barcode scanner. It has been designed for intense and continuous operation in retail sales, libraries, health centers and pharmacy, etc. Its light and ergonomic casing provides comfort of use. The function of dynamic scanning and wide scanning range, enable LS2208 to collect barcodes in a quick and reliable way, increasing work pace and efficiency. Intellistand™ system provides scanning of codes placed in front of the scanner, and easy switching between handheld and handfree mode (operation on a stand). A patented design of a single printed-circuit board eliminates failure endangered parts, i.e. connections between multiple boards. Scanning part of LS2208 with liquid polymere protects its module from shock based damages. LS2208 scanner features like integrated operation of various systems, universal cable or new symbols detection guarantee indispensable protection of an investment now and in the future.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Olympus BH-2 Microscope w/ 5 x Objectives SPlan 10PL 20PL 40PL Lab This item was removed from a univ (more)ersity lab where it was surplus to requirement. It is in good cosmetic condition and in good working order. Eyepieces; - 2 x Olympus WHK 10x/20 L Objectives; - SPlan 10PL 0.30 160/0.17 - SPlan 20PL 0.46 160/0.17 - SPlan100 1.25 oil 160/0.17 - Kyowa A4 0.10 160/- - SPlan 40PL 0.70 160/0.17

Vortem 1550 Shaking Incubator LABNET New equipment (never used) Complete with racks for 50 mL and 15 (more) mL tubes, 230V Temperature Range: Ambient +5° to 99°C Temperature Accuracy: ±0.5°C Speed Range: 200 to 900 rpm Motion, Orbit: Circular, 3mm Timer 1 to 99 min or continuous Capacity: 18 x 15 mL tubes or 8 x 50 mL tubes Dimensions: 10.2 x 12.2 x 12.2 in. (26 x 31 x 31 cm) Electrical: 230V~, 50 Hz

CS 60 A+B (ACID+BASIC) PVC - CHEMISAFE CABINET - Completely made with a thickness of 18 mm in HD PVC (more) - Extractor cover and plinth completely made of cold pressed steel sheet 1.0 mm thick, with epoxy coating with acid-resistant epoxy powders electrostatically applied at a temperature of 200°C, which guarantees a layer thickness greater than 90 microns on the entire surface of the cabinet - Monocoque structure built on a 15/10 mm base with adjustable leveling feet - Division into 2 compartments to store the different families of non-flammable chemicals separately - Simple hinged swing doors - Key lock - Door opening at an angle of 110° which allows the shelves to be extracted without tilting them - Corrosion-resistant plastic outer zipper - Compartments equipped with containment shelves made of PVC adjustable in height - Connection collar Ø 125 mm - Available with or without suction unit - Modular solutions - Tray shelves - Standardized pictograms according to ISO 3864 standards - Complies with EN 61010-1 standard Supplied: 2+2 PVC shelves (max load 40 Kg evenly distributed). Optional: - Shelves - Timer - Door open alarm - Ventilation

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don’t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

KODAK EKTACHEM DTSC II - DT60 II - DTE II Dry Technology Chemistry Analyze. Blood serum chemistry an (more)alyzer for fast test results. Depending on the module, different measurements can be made: DTSC to measure ALB, ALKP, ALT, AST, Ca, CHE, CK, CRSC, Fe, GGT, LDH, Li, LIPA, THEO DT60: to measure AMILO, TBIL, NBIL, BUN/UREA, CHOL, CREA, GLU, HDLC, LAC, Mg, NH3, PHOS, TP, TRIG, URIC. DTE: to measure CO2, Cl-, K+, Na+ DT60 II analyzer dimensions: width x depth x height: 47.6 x 34.9 x 17.2 cm, weight 11.6 kg. DTE II Module Dimensions: (W x D x H) 14.6 x 35.4 x 16.5 cm, weight 3.6 kg; DTSC Module Dimensions: (W x D x H) 34.3 x 35.4 x 18.0 cm, weight: 7.7 kg The KODAK EKTACHEM DTSC II Dry Technology Chemistry Analyzer is high-precision laboratory equipment designed to perform biochemical testing on blood serum samples. With its advanced technology, this analyzer is capable of measuring a wide range of parameters, such as glucose, cholesterol, triglycerides, uric acid, among others. Its compact and easy-to-use design makes it an ideal tool for clinical laboratories and hospitals. In addition, it has an automatic sample loading system, which speeds up the analysis process and minimizes errors. With the KODAK EKTACHEM DTSC II Blood Serum Analyzer, healthcare professionals can obtain accurate and reliable results in a short time, making it easier to diagnose and treat various diseases.

The Quattro is a 4x 96 wells thermal cycler. Each of the 4 segments can be programmed individually a (more)ccording to user specified programs.