Radwag PS 2100.X2.M Precision Balance

F1 class standard: knob weight Nominal value: 2 g Material: stainless steel Knob weight is exception (more)al measuring tool that represent the pinnacle of precision in the field of metrology. Classified as F1 metrology class, it is perfect for advanced applications where every detail of measurement is of paramount importance.

F1 class standard: knob weight Nominal value: 100 g Material: stainless steel Knob weight is excepti (more)onal measuring tool that represent the pinnacle of precision in the field of metrology. Classified as F1 metrology class, it is perfect for advanced applications where every detail of measurement is of paramount importance.

Highest Precision The E1 class mass standard of 50 kg is a cylindrical standard with the highest pre (more)cision, ensuring accuracy at the highest level. Made of high-quality materials to guarantee stability and reliable results. Ideal for laboratory, research, and industrial applications where weighing precision is crucial.

MYA Microbalances are very precise laboratory devices. They have unmatched repeatability values, the (more)ir readability is impressively high (from 1 µg), and their maximum capacity – very small (to 52 g). It is these three features that make MYA Microbalances excellent weighing devices for very small masses, used in research laboratories, including pharmaceutical, physical, chemical, biological and medical ones. Thanks to the best weighing parameters, the microbalances of this series will prove themselves in the most advanced laboratory processes. Why Choose MYA Microbalances in Particular? MYA Microbalances have the world’s lowest reading unit [d] 1 μg and the lowest minimum weight [USP] 0.82 mg. They are equipped with an automatic, draft-proof weighing chamber and have a fully automatic levelling system. Automatic levelling is more convenient than semi-automatic and manual ones, saves time, and, above all, guarantees model position of the measuring system and gives maximally precise measurement results. We offer a large selection of MYA Microbalance models, and thus a wide spectrum of readability and maximum capacity, which translates into a variety of applications for this series of balances. Do you need a balance that not only determines weight with impressive accuracy, but also performs a digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of balances: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. Automatic Leveling of the Balance ReflexLEVEL System Instead of manually leveling your scale - level it automatically. The ReflexLEVEL System saves you time and gives you maximum precision in your measurements. Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement. * RFID ISO/IEC 14443 Type A, 13.56 MHz

The series of standard electromagnetic modules of high resolution, MAS.1, is intended for integratio (more)n into customer’s weighing systems. The high resolution MAS.1 module operates on the basis of electromagnetic force converter. Thanks to its compact design and integrated electronics the module can be both adapted into technological lines and installed inside customers' devices. By cause of high measurement accuracy, it is recommended to install the module inside customer's instrument (e.g. in a draft shield) in order to reduce the influence of ambient conditions on the measurement result. The MAS.1 module comes standard with a dedicated power supply. Features: Brand new design of the electromagnetic mechanism housed in an aluminium enclosure, Readability of 0.01 mg, Overload protection, Ease of adaptation to the required storage space,, Internal adjustment, Various options of hardware configuration.

MA X7.A moisture analyzers are hi-tech measuring instruments intended for quick determination of rel (more)ative moisture content, dry mass content and other parameters in samples of different substances. MA.X7.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X7.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X7 Series moisture analyzers: Automatic opening and closing of the drying chamber 7” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X7.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

This  Surgipath Medical 04502GFS-240 Premier Cooling Plate was removed from a university lab wh (more)ere it was surplus to requirements. The item powers on and is in a reasonably used cosmetic condition. It is in good cosmetic condition. Work platform cooled to: –10ºc

Memmert IPP110ecoplus Peltier-Cooled Forced Circulation Incubator 108L, 115V Setting Temperature Ran (more)ge Ambient 0°C to 70°C Convection Type Peltier Fan Forced Circulation Chamber Volume 108 L (3.8 cu.ft.) Features - 108 L volume capacity with precise temperature control - Working temperature range from 0°C (at least 20°C below ambient) to +70°C - Energy-saving Peltier heating/cooling system with individually controlled upper and lower elements - ControlCOCKPIT with TwinDISPLAY and adaptive multifunctional digital PID-microprocessor controller - Process timing starts only when the set temperature is reached with the SetpointWAIT function - Three freely selectable temperature calibration points for accurate control - Over- and undertemperature monitor with AutoSAFETY protection for enhanced safety - Durable stainless steel interior and textured stainless steel exterior for corrosion resistance and easy cleaning The Memmert IPP110ecoplus Peltier-Cooled Forced Circulation Incubator 108L, 115V delivers precise, energy-efficient temperature control for advanced laboratory applications. With a generous 108-liter capacity and a working temperature range from 0°C (at least 20°C below ambient) to +70°C, this incubator supports a variety of sample requirements. The energy-saving Peltier heating and cooling system, featuring individually controlled upper and lower elements, ensures uniform and reliable temperature distribution. The intuitive ControlCOCKPIT with TwinDISPLAY, equipped with a PID-microprocessor controller and high-definition TFT displays, provides easy monitoring, while the SetpointWAIT function enhances accuracy by starting process timing only once the desired temperature is reached. This incubator’s robust stainless steel interior and textured exterior resist corrosion and allow for easy maintenance, ideal for long-term use in demanding environments. Safety features include an AutoSAFETY over- and undertemperature monitor with both visual and acoustic alarms, ensuring protection for sensitive samples. Additional features, such as three customizable temperature calibration points, an autodiagnostic system for fault detection, and a capacity for up to five shelves with a maximum chamber load of 330 lbs, make the IPP110ecoplus a versatile and reliable choice for modern labs. INCLUDED: The Memmert IPP110ecoplus Peltier-Cooled Forced Circulation Incubator 108L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don’t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

M1 Mass Standard - rectangular. Nominal value - 500 kg.

Scilogex iTrite Electronic Motorized Digital Bottletop Burette, 0.01-99.99ml, 110-240V Volume Range  (more) 0.1 to 99.9ml - 100ul resolution Max. piston capacity 10ml Volume increments 0.1ml Features - Two dispensing modes. Single volume dispensing to 99.9ml or multi-dispensing (from 0.2ml x 50 times, to 5ml x 2 times) - High quality motor providing excellent precision and accuracy - Electronic control decreases repetitive strain injury - The control panel makes the operating process without the manual disturbance - Built-in magnetic stirrer The iDrop Digital Burette delivers accurate, precise, and convenient bottle-top titration as well as optimum operator safety. This product combines a magnetic stirrer with the titration process, and makes it easier for the operater achieve satisfactory results in applications including analytical chemistry, and water analysis. INCLUDED: The Scilogex iTrite Electronic Motorized Digital Bottletop Burette, 0.01-99.99ml, 110-240V includes: - Magnetic stirrer base and 20 x 5mm stir bar. - TFT display module. - Integral rechargeable battery. - AC adapter. - Corded remote control - Adjustable titrating nozzle with flexible tube and stand - Adapters (GL25, GL28, GL32, GL38 & S40mm) to fit all common lab bottles - Operators Manual - Power Cord - 1 Year Manufacturer's Warranty

Gilson PIPETMAN G P1000G, 100-1000 µL, Metal Ejector PipetteFeatures - Made of PVDF and stainless st (more)eel, PIPETMAN Goffers premium durability - One of the lowest pipetting forces commercially available - redesigned piston assembly system and high-quality piston grease,PIPETMAN G guarantees hours of comfortable pipetting. - N G clipejector allows for convenient access to serviceableparts. - Pipettes come in either single or multichannel models equipped with metaltip ejectors - Volume range of 100 to 1000µL - 3 year manufacturer's warranty - Optional accessories allow for greater comfort while pipetting - Multi-colored heads allow for quick and easy pipette exchange PIPETMAN® G brings a new level of comfort into Gilson range with a redesigned piston mechanism that reduces the force needed to aspirate and dispense liquids. PIPETMAN G maintains the trusted durability, accuracy, and reliability of the original PIPETMAN pipettes with comfort. PIPETMAN G offers one of the lowest pipetting forces commercially available. With a redesigned piston assembly system and high quality piston grease, PIPETMAN G guarantees hours of comfortable pipetting. PIPETMAN G relies on the legendary accuracy, precision, and reliability of PIPETMAN with improved pipetting comfort. Made of PVDF and stainless steel, PIPETMAN G offers premium durability. The PIPETMAN G clip ejector allows for convenient access to serviceable parts. CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson PIPETMAN G P1000G, 100-1000 µL, Metal Ejector Pipette includes: - Operator's Guide - Manufacturer's Documentation - 3 Year Manufacturer's Warranty