Radwag F2 Mass Standard - Carrier Weights - 20 kg

F2 Mass Standard - slotted weights. Nominal value - 20 kg.

F2 Mass Standard - knob weights, service case. Nominal value - 1000 kg.

F1 class standard: knob weight Nominal value: 5 g Material: stainless steel Knob weight is exception (more)al measuring tool that represent the pinnacle of precision in the field of metrology. Classified as F1 metrology class, it is perfect for advanced applications where every detail of measurement is of paramount importance.

E2-class mass standards represent an exceptional standard of precision in mass measurement. Classed  (more)as E2 metrology class, they are characterized not only by their high accuracy, but also by their versatility for use in laboratories, industry or scientific research. E2 class standard: stainless steel wire Nominal value: 1 mg Material: stainless steel High Precision of measurements The mass standard is the foundation of accurate mass measurement, as it affects the quality and reliability of results in many areas. Its role in maintaining uniformity and in meeting measurement standards is crucial, making the mass standard an indispensable metrology component. Stability over Time An important feature of E2 class mass standards is their ability to maintain measurement stability over the long term. It is this stability that makes standards of this class highly valued in laboratories and industry. Calibration and Strict Quality Control Systematic calibration is a key element in maintaining E2 class standards. This process involves comparing the mass standard with other standards of known mass to confirm and maintain measurement accuracy. Versatility of Applications E2 class mass standards are designed for a wide variety of applications. They can be used in analytical laboratories, the pharmaceutical industry, scientific research or other areas requiring precise mass measurements. Applications 1. Analytical Laboratories In analytical laboratories, where precise and repeatable measurements are crucial, E2 class mass standards find their wide application. 2. Pharma Industry In drug manufacturing, where quality control plays a key role, E2 class mass standards are indispensable in the calibration process of balances. 3. Scientific Research In scientific research, especially in areas requiring the utmost precision, E2 class mass standards are an indispensable tool for obtaining reliable results. 4. Metrology Industry In metrology laboratories, E2 class standards provide a reference point for evaluating and testing other measurement standards. E2 class standards are synonymous with excellence in mass measurement. Their versatility and high precision make them an indispensable tool in laboratories around the world and improve the quality and reliability of mass measurement results.

This set is the perfect solution for laboratories and institutions requiring the highest precision.  (more)These cylindrical mass standards are made from the highest quality materials, ensuring excellent stability and resistance to environmental changes. Product Features: Varied Standards: The set consists of 12 wire standards and 13 cylindrical standards, providing a wide range of calibration options. High-Quality Accessories: The set also includes 2 pairs of tweezers, 2 brushes and 1 pair of gloves, facilitating precise and safe cleaning and handling of the standards. Plastic packaging: The weights are delivered in a durable plastic case, ensuring their safe storage and transport. *The mg unit mass standards are wires. By choosing the E1 class mass standard set from RADWAG, you invest in reliability, precision, and durability, which translates to excellent quality in your laboratory work.

It is the ideal solution for laboratories and institutions requiring the highest precision. The cyli (more)ndrical mass standards are made from the highest quality materials, ensuring their stability and resistance to changes in environmental conditions. This makes them perfect for the calibration of precise measuring instruments. Product Features: Highest Class of Accuracy: Class E1 is the highest standard of accuracy, making these standards ideal for calibrating precision measuring instruments. Cylindrical Shape: The cylindrical shape of the standards ensures ease of handling and precise placement on weighing platforms. Wooden Packaging: The standards are delivered in an elegant wooden box, which ensures their safe storage and transport. Set Includes: 17 mass standards, 2 pairs of tweezers, 2 brushes and 1 pair of gloves. Applications E1 class standards are ideal for the calibration and verification of precise analytical and laboratory balances, indispensable in metrology laboratories, as well as in research and industrial institutions where maintaining the highest standards of accuracy is necessary. By choosing the E1 class mass standard set from RADWAG, you invest in reliability, precision, and durability, which translates to excellent quality in your laboratory work.

This listing is for 1 of 2 Scientific Industries SI-300X MultiMagstir Magnetic Stirrer. The unit is (more) in full working condition and is ready for immidate realese. Four Position Multi Mag Stir Genie provides low to high speed stirring and editable memory profiles. Microprocessor controls offer precision and reproducibility. May be used with up to four 1 L flasks/beakers or three 1 L spinner flasks and a maximum sample weight of 10.0 Kg High and low speed range from 10-1200 rpm including reverse and interval stirring Provides low to high speed stirring and editable memory profiles Low/Medium/High power levels available for various sample viscosities Uses microprocessor control for precise and reproducible operation Manual Mode provides stir, stir reverse, and time functions Profiles Mode allows users to quickly program speed, ramp rate, stir direction, time (including pause), and power level in up to 9 distinct steps Up to 4 stirring profiles can be saved Automatic Mode recalls and executes one of up to 4 user-defined profiles Stirring Positions 4 Display LCD (2 lines by 16 characters) Wattage 460 w Height (Metric) 48 mm Length (Metric) 375 mm Width (Metric) 325 mm

Chemical resistant vacuum pump consisting of N 840 G diaphragm vacuum pump, support base, a separato (more)r on the suction side, a high-performance condenser on the pressure side and the Wifi device for remote vacuum control. Thanks to the high compatibility of steam and condensate, the system is perfectly suited for extremely aggressive / corrosive gases and vapors. Technical features Flow rate (max.): 34 l / min Final vacuum (max.): 6 mbar (abs.) Pressure (max.): 0.1 bar (rel.) Flow rate (m³/h) at atm. pressure: 2,04 Permissible fluid temperature between 5 and 40°C Valve material: FFPM Diaphragm material: PTFE coated Pump head material: TFM ™ PTFE Applications Vacuum oven Distillation Rotary evaporation Multi-user vacuum systems Qualitative characteristics Automatic and accurate recognition and monitoring of the boiling point via the integrated ramp function High recovery rates even with low boiling point solvents Wifi control device for safe operation from the outside of closed fume hoods Vacuum system comprising chemically resistant diaphragm vacuum pump, base plate, separator on suction side and high performance condenser on pressure side Modular expandable 100% oil-free transfer Thereby pure transferring, evacuation and compression of gases High level of vapor and condensate compatibility Ideal for extremely aggressive / corrosive gases and vapors Integrated gas ballast valve 3-color status display for in operation / stand-by / error Integrated rotational speed control Environmentally friendly Start against ultimate vacuum of the pump Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Mass comparators of UMA 100 series stand for the highest standard of professional automatic mass com (more)parators. They provide comparison of 1 g – 100 g weights of E1 and lower classes. The device is equipped with 36 magazine positions allowing to deposit up to 36 weights. This solution allows to perform either comparison for complete set of weights carried out within one process or comparison for just a few weights of the same mass. Owing to elimination of human factor and with temperature changes and air drafts reduced to zero, UMA automatic mass comparators provide the highest possible measurement repeatability.

Ohaus ISLD04HDG Incubating Shaker The Ohaus ISLD04HDG Incubating Light Duty Shaker is designed to in (more)cubate samples from 5° ambient to 65° C depending on the model and ideal for heating and shaking a variety of samples. The ISLD04HDG has an 8 lb (3.6 kg) capacity while the Incubating Microplate Shaker can hold up to four standard or deep well plates. Incubating-Cooling Mini Shaker is designed to hold two microplates or two optional modular tube blocks. The ISLD04HDG features LED displays with touchpad controls. The variable speed microprocessor control provides consistent, uniform shaking action. The microprocessor will display the last setpoint and will restart if power is interrupted. Triple eccentric drive with permanently lubricated ball bearings and maintenance-free brushless DC motor provides reliable service and continuous duty operation. Units slowly increase speed to desired setpoint to avoid splashing. Digital models feature overload protection. Audible and visual signals activate when the system detects obstruction or tray overload.INCLUDED: The Ohaus ISLD04HDG Incubating Shaker includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty Ohaus ISLD04HDG Incubating Shaker Specifications Temperature RangeAmbient +5° C to 65° CTemperature Uniformity± 0.5° C at 37° CSpeed Range100 to 1200 rpmSpeed Accuracy± 2% of set speedTimer1 second to 160 hoursOrbit3 mm (0.12")Maximum Weight Capacity8 lbs (3.6 kg)Tray MaterialAluminumTray Dimensions (L x W)11 × 7.75" (27.9 x 19.7 cm)Interior Dimensions (L x W x H)11.3 x 8.3 x 5.7" (28.7 x 21.1 x 14.5 cm)Overall Dimensions (L x W x H)17 x 11 x 10.7" (43.2 x 27.9 x 27 cm)Ship Weight30 lbs (13.6 kg)Comparison of ModelsSpecificationOhaus ISHD23HDGOhaus ISLD04HDGOhaus ISLDMPHDGOhaus ISLDMPHDGLOhaus ISRK04HDGOhaus ISWV02HDGTemperature RangeAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CTemperature Uniformity± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°CSpeed Range15 rpm to 500 rpm100 to 1200 rpm100 to 1200 rpm100 to 1200 rpm1 to 50 rpm1 to 30 rpmSpeed AccuracyAbove 100rpm +/- 1%, Below 100rpm +/- 1 rpm± 2% of set speed± 2%± 2%± 1 rpm± 1 rpmOrbit25 mm (0.98")3 mm (0.12")3 mm (0.12")3 mm (0.12")N/AN/AMaximum Weight Capacity50 lb (22.7kg) @ 125 rpm, 10 lb (4.53kg) @ 500 rpm8 lbs (3.6 kg)4 microplates or 2 micro-tube racks4 microplates or 2 micro-tube racks10 lbs (4.5 kg)5 lbs (2.3 kg)Tray Dimensions (L x W)18 x 18" (457 x 457 mm)11 × 7.75" (27.9 x 19.7 cm)11 x 7.75" (27.9 x 19.7 cm)11 x 7.75" (27.9 x 19.7 cm)10 x 7.5" (25.4 x 19.1 cm)9.25 x 7.25" (23.5 x 18.4 cm)Overall Dimensions (L x W x H)23.5 in x 32.1 in x 26.6 in17 x 11 x 10.7"17 x 11 x 7.75"17 x 11 x 7.75"17 x 11 x 10.5"17 x 11 x 10.5".comparison-table tr td:nth-child(3) { background-color: #fffacd; }

Julabo CORIO CD-BC26 Heating Circulator, 115V/60Hz (NRTL Certified) Working Temperature Range 20°C - (more) 150°C Heating Capacity 1000W Fluid Type Water, Silicone Features - Models for internal and external applications - Bright, white, easy to read display - Very quiet - Easy pump change-over between internal and external circulation - USB connection - High-quality bath tanks made of stainless steel with bath lid and drain tap - Integrated cooling coil for counter-cooling CORIO™ CD Heating Circulator combinations with stainless steel bath tanks for routine laboratory tasks. Units include bright LED display and easy operation.CORIO™ CD immersion circulator provides temperatures from +20 to +150 °C. Integrated pump enables temperature incubation for internal or external bath applications. A lever below the display enables simple adjustment between internal and external flow. Pump capacity: 15 L/min; 5.1 PSI. The integrated USB port provide external PC communication for control / monitoring and data logging.The CORIO™ CD has M16x1 male pump connections and comes with sets of 8 and 12 mm hose barbs. Stainless steel tanks include drain port.For internal and external temperature applications. High quality stainless steel bath tanks with bath lid, drain tap and integrated cooling coil.INCLUDED: The Julabo CORIO CD-BC26 Heating Circulator, 115V/60Hz (NRTL Certified) includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Bath Lid - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA HB Eco Heating Bath Heat Temp. Range Room Temp. to 99°C Filling Volume Max. 4 l Material in Cont (more)act W/ Medium SS 1.4404 Features - 4 l bath volume - Max. media temperature: 99 °C - Ergonomic handles for easy handling - Temperature display - Alternating display of set-point/ actual temperature - USB interface - Stainless Steel 1.4404 construction to ensure durability The IKA HB Eco Heating Bath is a compact and ergonomic heating bath with a 4-liter volume, designed for efficient heating up to a maximum media temperature of 99 °C. It features ergonomic handles for easy handling and an alternating display of set-point and actual temperatures for precise monitoring. The bath has a USB interface for connectivity and data transfer. With a heat output of 1400 W, the heating temperature range is from room temperature to 99 °C, controlled by a turning knob with a set temperature resolution of 1 ±K. Made from stainless steel 1.4404, the bath is durable and resistant to corrosion. It includes a fixed safety circuit at 109 °C and complies with DIN 12876 Class I standards. The device dimensions are 330 x 190 x 325 mm, and it weighs 3.9 kg. Suitable for ambient temperatures of 5 - 40 °C and relative humidity up to 80%, the IKA HB Eco Heating Bath is a reliable and user-friendly tool for various laboratory heating applications.