Radwag F1 Mass Standard - Knob Weights With Sdjustment Chamber, Set (1 g - 500 g), Plastic Box

This listing is for a Analytical 200g Weight. The unit is in full working condition and is ready fo (more)r immediate release. Analytical Weight Set is a set of weights used in laboratory balances and scales for precise measurements

F2 Mass Standard - knob weights, service case. Nominal value - 250 kg.

F1 Mass Standard - rectangular weights. Nominal value - 20 kg.

F1 Mass Standard - knob weights, service case. Nominal value - 200 kg.

M1 Mass Standard - rectangular. Nominal value - 200 kg.

E1 class mass standards are characterized by the highest precision in terms of mass. The allowable d (more)eviation from the actual weight is minimal, making standards of this class ideal for applications where every milligram matters. Product Features: Varied Standards: The set consists of 12 wire standards and 8 cylindrical standards, providing a wide range of calibration options. High-Quality Accessories: The set also includes a brush and tweezers, facilitating precise and safe cleaning and handling of the standards. Elegant Packaging: The standards are delivered in an elegant wooden box, ensuring their safe storage and transportation. *The mg unit mass standards are wires.

Set of 12 ZWIEBEL calibration weights 1mg to 500mg class F1 INOX Stainless steel laboratory calibrat (more)ion weights Brand: ZWIEBEL 12 weights: 1mg => maximum permissible error: ± 0.02mg 2mg => maximum permissible error: ± 0.02mg 2mg => maximum permissible error: ± 0.02mg 5mg => maximum permissible error: ± 0.02mg 10mg => maximum permissible error: ± 0.025mg 10mg => maximum permissible error: ± 0.025mg 20mg => maximum permissible error: ± 0.03mg 50mg => maximum permissible error: ± 0.04mg 100mg => maximum permissible error: ± 0.05mg 100mg => maximum permissible error tolerated: ± 0.05mg 200mg => maximum tolerated error: ± 0.06mg 500mg => maximum tolerated error: ± 0.08mg Type / class: F1 Weight checked on a precision balance at 0.0001g (0.1mg) - see photo In its wooden box uncalibrated weight

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Memmert IF110 Forced Circulation Incubator 108L, 115V Working Temperature Range Min. 10°C above amb (more)ient up to +80°C Convection Type Forced Air Chamber Volume 108 L (3.8 cu.ft.) Features - Setting temperature range from +20°C to +80°C with a working range starting at Min. 10°C above ambient - Volume of 108 L (3.8 cu.ft.) with a reinforced stainless steel interior - ControlCOCKPIT adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display - Adjustable parameters include temperature (Celsius or Fahrenheit), fan speed, air flap position, and program time - Forced air circulation by quiet air turbine, adjustable in 10% steps with pre-heated fresh air admixture - Safety features include an adjustable overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 - Easy-to-clean stainless steel interior reinforced with deep drawn ribbing and integrated large-area heating on four sides The Memmert IF110 Forced Circulation Incubator 108L, 115V is designed to provide precise temperature control and reliable performance for laboratory applications. With a setting temperature range from +20°C to +80°C and a working range starting at 10°C above ambient, this incubator ensures stable thermal conditions for a wide variety of processes. Its spacious 108L (3.8 cu.ft.) chamber is constructed with reinforced stainless steel, offering both durability and easy cleaning. The advanced ControlCOCKPIT adaptive multifunctional digital PID-microprocessor controller, featuring a high-definition TFT-color display, allows for easy adjustments to critical parameters like temperature, fan speed, air flap position, and program time. The IF110 also prioritizes safety with an adjustable overtemperature monitor and mechanical temperature limiter (TB) that meets protection class 1 standards according to DIN 12880. Forced air circulation, powered by a quiet air turbine adjustable in 10% steps, ensures uniform temperature distribution, while the pre-heated fresh air admixture feature allows for greater environmental control. Additional functionality includes the AtmoCONTROL software for programming and data management via Ethernet or USB. With a maximum chamber load of 385 lbs and each shelf supporting up to 44 lbs, the IF110 incubator is a reliable and efficient solution for demanding laboratory environments. INCLUDED: TheMemmert IF110 Forced Circulation Incubator 108L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

PT0443 Cable is used to connect the 5Y series balance or the PUE CY10 terminal to a computer. Its st (more)andard length is 1,8 m. Optionally, the cable is used to connect the 5Y series balance or the PUE CY10 terminal to: AS X2 and AS R series balances PS X2 i PS R series balances PM C32 series balances WLC and WTC series balances, and C315 series scales MAS and MPS series weighing modules

If you buy a Multifunctional Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Multifunctional scales HY10 series is designed to fast and precise determination of mass in industrial conditions. The HY10 scales features terminal PUE HY10 series in stainless steel housing and a single load cell weighing platform in mild steel powder coated version. The HY10 series scales features mild steel powder coated construction with stainless steel weighing platform. The terminal PUE HY10 series features a 10,1” colourful touch screen display, keyboard with numeric and function keys. The scales enable cooperating with an additional weighing platforms. Additionally, the HY10 series offers full functionality available in the terminal PUE HY10 series: programmable display and function keys, designing custom printout templates, designing text data indicated on terminal display. Multifunctional scales HY10 series are offered with a terminal connected to a weighing platform through a cable. Scales HY10 series is available in dual range version on surcharge. Dedicated Applications Smart Editor The application is intended for scales equipped with the HY10 terminal. It does not require any additional installations. Enter the terminal’s address in the browser address field and log in. The application enables: - remote databases editing - import of images from the graphic file to the scale - labels import from lb file to the scale - creating and preview of report, e.g. Workflow - dosing processes operation Smart Display The application allows to personalise the scale screen and display it on a computer. The Smart Display enables customization of the display screen in a simple and clear way. Place the individual elements on a grid visible on the screen. These elements can be further scaled to suit user needs. When operated directly on the scale, the user gets a new, refreshed look with the possibility of any configuration of the home screen. If the application is operated via a computer browser, it enables remote control of the desktop or setting larger mass indication window. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface.