Radwag Cylinder Weights, Set (1 g - 500 g), Wooden Box

F2 Mass Standard - knob weights with adjustment chamber - set (1 g - 5 kg), plastic box Number of pi (more)eces in the set: 16 Weights 1 g i 2 g – solid masses without adjusting chamber

F1 Mass Standard - knob weights, service case. Nominal value - 250 kg.

F1 Mass Standard - knob weights without adjustment chamber - set (1 mg - 50 g), wooden box Number of (more) pieces in the set: 20

E1-class mass standards are the elite in the world of metrology, because standards of this class rep (more)resent the highest level of precision and accuracy in mass measurement. The E1 classification is one of the most stringent standards that standards must meet in order to be considered the most advanced and trustworthy measurement tools. E1 - class standard: flat polygonal sheet Nominal value: 50 mg Material: Stainless steel What Are the Characteristics of the E1 Class? Highest Precision - The allowable deviation from the actual weight is minimal, making standards of this class ideal for applications where every gram matters. Stability and Repeatability - This guarantees a consistent level of accuracy over the long term. Accurate Calibration - Standards of this class must be regularly compared with other standards of known mass to confirm their measurement accuracy. Materials with Unique Properties - E1 class mass standards are often made of materials with exceptional physical properties, which makes them stable and resistant to changes in environmental conditions. Application 1. Analytical Laboratories In analytical laboratories where accurate measurements are crucial, E1 class mass standards are used to calibrate balances with the highest precision. 2. Pharmaceutical Industry In drug manufacturing, where even the slightest deviation from the standard affects quality, E1 class mass standards are irreplaceable. 3. Scientific Research In scientific research, especially in areas requiring the highest precision, such as physics or chemistry, E1 class mass standards are used to ensure reliable results. 4. Metrology Industry In metrology laboratories where research on E1 class mass standards alone is carried out, E1 class standards are the standard of excellence. Class E1 mass standards are not only measuring tools, but also a symbol of metrological excellence. Their use affects the quality of measurements in various areas of life because they provide precision that can be relied upon. They are a key element in the world of mass measurement, shaping standards and raising the bar for all measurement tools.

M1 Mass Standard - knob weights - set (1 mg - 2 kg), plastic box.

The mass standard is the foundation of accurate mass measurement, as it affects the quality and reli (more)ability of results in many areas. Its role in maintaining uniformity and in meeting measurement standards is crucial, making the mass standard an indispensable metrology component. Varied Standards: The set consists of 12 flat polygonal sheets and 8 cylindrical standards, providing a wide range of calibration options. High-Quality Accessories: The set also includes 2 pairs of tweezers, 1 brush and 1 pair of gloves, facilitating precise and safe cleaning and handling of the standards. Plastic Packaging: The weights are delivered in a durable plastic case, ensuring their safe storage and transport. *The mg unit mass standards are flat polygonal sheets. **The 1 mg, 2 mg and 5 mg mass standards are made of aluminum.

IKA C 200 auto Semi-Automated Calorimeter w/ Automated Water Handling Measuring Range Max. 40000 J M (more)easuring Time Dynamic Approx. 8 min Cooling Medium Permissable Operating Pressure 2 bar Features - Compact, space-saving, and cost-effective design for educational and low-volume industrial laboratories - Capable of measuring calorific values for liquid and solid samples - Four operation modes: isoperibol, dynamic, manual, and time-controlled (14 min). - Semi-automated system with manual water and oxygen handling, and optional automation available - Closed-loop water circulation with optional RC 2 basic chiller for improved reproducibility and efficiency - Operated via C 6040 CalWin software for monitoring, multi-calorimeter management, and data export - Compatible with DIN 51900, ISO 1928, ASTM D240, ASTM D4809, ASTM D5865, ASTM D1989, ASTM D5468, ASTM E711, GOST 147, GOST 21261 - Compact dimensions (15.7 x 15.7 x 15.7 in.) and lightweight (46.3 lb.) for ease of installation - Installation and calibration consumables included for seamless setup The C 200 auto package allows operating the C 200 with a completely automated water cycle. This results in ease of handling and saves valuable time especially for laboratories with a low number of analyses. The water circulates in a closed loop and is kept at a constant temperature by using a recirculating chiller. This leads to shorter preparation time for each experiment and even better reproducible results. The semi-automated and conforming to standards combustion calorimeter determines the gross calorific value of liquid and solid samples. So far it has mainly been used for teaching and training purposes at technical schools and universities. Due to the automated water handling it is now also suitable for industrial laboratories with low number of analyses. Four different operation modes enable the user to control the measuring times according to individual requirements: Isoperibol: approx: 17 min. Dynamic : approx. 8 min Manual : approx. 17 min (depends on the operator) Time controlled : 14 min Measurements are possible according to e.g. DIN 51900, ISO 1928, ASTM D240, ASTM D4809, ASTM D5865, ASTM D1989, ASTM D5468, ASTM E711. The software C 6040 Calwin controls the unit and monitors the measurement of the samples. Additionally, collected data can be exported to e.g. Excel, Word, SQL and LIMS for further analysis. It is possible to operate several calorimeters with one PC. A PC is not part of the scope of delivery and needs to be provided by the operator. Calwin is sold separately. INCLUDED: The IKA C 200 auto Semi-Automated Calorimeter w/ Automated Water Handling includes: - C 200 Measuring Cell - C 5010 Decomposition Vessel - C 248 Oxygen Filling Station - RC 2 Basic Recirculating Chiller - Ignation Adapter - Water Emptying Hose - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don’t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).

Scilogex 4 x Buckets & 4 x 9 Tubes 3mL & 7mL CapacityThe Scilogex 4 x Buckets & 4 x 9 Tu (more)bes 3mL & 7mL Capacity (including adapters and requires swing out rotor Cat # 19400041) INCLUDED: The Scilogex 4 x Buckets & 4 x 9 Tubes 3mL & 7mL Capacity includes: - Adapters - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW