Moisture Analyzer MB120 Ohaus

New generation! The OHAUS Scout Scale, with its large backlit LCD display and integrated educational (more) software is the ideal tool for use in the classroom. Offering world-class overload protection, fast stabilization times, increased capacity, more connection options, and a stackable design—the ultimate educational weighing experience. - Excellent overload protection and practical stackable design - Backlit LCD display and 4-button operation: very easy to use in all conditions - High weighing speed and high resolution display The OHAUS Scout scale can be equipped with various connectivity options: RS232, USB, USB device, Ethernet or Bluetooth®. These options ensure a more modern and smarter student experience, increasing accuracy and efficiency. Other Standard Features and Equipment Transport lock, stainless steel weighing pan, menu and adjustment lockout switch, software and mechanical overload/underload protection, stability indicator, auto tare, low battery indicator, auto power off user selectable print options and communication settings. Applications Weighing: allows you to calculate the weight of the samples in the selected unit of measure. Density determination: calculation of the density of solids or liquids. With the built-in weigh below hook, you can test for the specific gravity of objects that cannot be placed on the weighing pan. Molar Concentration: Calculate the mass of a sample and automatically convert to the molar concentration. MODELS AVAILABLE: Applications Weighing, determination of density, weighing of moles Screen Liquid crystal display (LCD) with backlight Operation AC adapter (included) or 4 AA batteries (not included) Communication RS232, USB host, USB device, Ethernet or Bluetooth™ (available as an accessory) Construction ABS housing, stainless steel bowl, ABS draft shield (1 mg model only), bottom weigh hook, transport lock, manual calibration lock switch, security slot Project features Stability indicator, stackable design with storage lid included (excluding 1 mg model), mechanical and software over/underload protection, low battery indicator, auto power off, auto tare, span calibration mass included in models with capacity up to 620 g NO MORE BROKEN SCALES! The excellent overload protection of the Scout balance consists of a weighing pan made of high-strength stainless steel and a pan support made of impact-resistant plastic. The system allows the balance to safely support loads up to 10 times its rated capacity, withstanding use in even the most demanding educational environments. In addition, the integrated transport lock protects the load cell from damage during transport, stacking and storage.

Made of fabric, protects device housing against dust, dirt, etc.

Powerbank ZR-04 is used for rechargeable power supply for balances and scale accessories. It uses fa (more)st charging technology. It allows long operating time without recharging and, thanks to the “Low Power” function, powering devices with low power consumption. The ZR-04 powerbank is made of high-quality components that ensure reliable operation. A display indicating the state of charge enhances ergonomics. Powerbank ZR-04 meets airline standards, which means that it can be carried on board an airplane as hand luggage. The device can simultaneously power the balance/ scale and charge the internal battery. The average power time of the balance/ scale is, depending on the product series, from 8 to as much as 24 hours.

Paper for RTP printer - 80mm.

THB W sensor is intended to measure temperature of liquid. THB W Temperature readout using THB W sen (more)sor is possible upon connecting the sensor directly to a computer or to the THBR Box ambient conditions recorder. THB W can be used e.g. on pipettes calibration workstation, to measure water temperature in gravimetric method, which is done in order to determine 'Z' coefficient in accordance with ISO 8655. Each sensor has its own identification number that is assigned to measurements saved to the database. Ambient conditions can be monitored using: weighing instrument display website Windows OS application: THB Single or THB Multi Android application.

A stent is a type of prosthesis that is placed inside a blood vessel to restore its patency. Stent D (more)ozens of lives are saved thanks to it. Its shape, size, and weight must be matched to the blood vessel. In addition, the stent application site requires attention to sterility. These properties necessitate the use of balances with the highest resolution for the inspection of stents. The stent weighing kit has been designed to ensure that such a delicate sample, a stent, is weighed with the greatest precision possible, yet in an easy and ergonomic manner. The said precision is obtained thanks to the XA 5Y.M.A.S. microbalances, and ergonomics due to the specially designed weighing pan and additional draft shields. The weighing pans that are part of the kit allow for weighing stents of different sizes, including 5.5 × 140 mm, 6 × 60 mm, 8 × 40 mm, 8 × 40 mm, 19 × 10 mm, and 1.6 × 19 mm. Thanks to the well-thought-out design of the kit and its applicators, the user places the stent on a special tray, which increases ergonomics and eliminates cross-contamination. The stent weighing kit includes 7 items: draft shield base, 2 draft shields, 2 fork-shaped stent weighing pans: for small (1) and large (1) stents, 2 stent applicators: for small (1) and large (1) stents. Due to the different shapes and sizes of stents, two types of weighing pans, dedicated covers, and size-appropriate applicators come standard with the kit. The RADWAG-manufactured microbalance is a versatile solution. Therefore, it can be operated by a right- or left-handed person. The overall design of the kit, i.e. a fork-shaped weighing pan with an additional draft shield, has eliminated the difficulties associated with weighing of a small-weight sample of a relatively large volume such as stent. With this, the stent weighing results are obtained with an accuracy equal to that of the balance. The kit is intended for all load capacities of the XA 5Y.M.A.S. series balances.

This listing is for a QuattroFlow QF150 Diaphragm Pump. The unit is in full working condition and i (more)s ready for immediate release. The Quattroflow 150S is a 4-piston Diaphragm pump, which is mainly used to pump water-like fluids that are typically handled in research-, pilot plant- or production facilities of the pharmaceutical, biotech, food or cosmetic research centres or plants. Examples: • Solutions containing proteins (albumin, IgG, Clotting factors, monoclonal antibodies, enzymes, vaccines.) • Solutions of polymers or suspensions (silicon, latex, chromatography media) • Cell suspensions (bacteria, yeast, algae, fungi, mammalian cells) • colloidal solutions • Suspensions of viruses or phage • Dairy products • Gelatine • Supplements and ingredients for cosmetic and food Flow rate max.: Eccentric shaft 3° l/h (lpm) 100 (1.67) 100 (1.67) Eccentric shaft 5° l/h (lpm) 180 (3) 180 (3) Flow rate min.: Eccentric shaft 3° l/h (lpm) 1 (0.017) 1 (0.017) Eccentric shaft 5° l/h (lpm) 1 (0.017) 1 (0.017) Pressure: Temperature of fluid < 40°C bar (psi) 6 (87) 6 (87) Temperature of fluid > 40°C bar (psi) 4 (58) 4 (58) Temperature max.: Fluid °C (°F) 80 (176) 80 (176) CIP °C (°F) 90 (194) 90 (194) SIP °C (°F) 130 (260) 130 (260) Autoclave °C (°F) 130 (260) 130 (260) Suction lift dry at: 3000 rpm 3000 rpm Eccentric shaft 3° m (ft) 1-1,5 (3.2-4.9) 1-1,5 (3.2-4.9) Eccentric shaft 5° m (ft) 2-3 (6.6-9.8) 2-3 (6.6-9.8) Volume specifications: Approximated volume per revolution at free output ml 0,72 (3°) 1,2 (5°) 0,72 (3°) 1,2 (5°) Filling volume without connectors ml 15 15 Residual volume (after idle with highspeed motor) ml 1-3 1-3 Product wetted surface (approx.) cm² (inch²) 112 (17) 112 (17) Speed range pump rpm 10-3000 10-3000 Connection specification inlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm (inch) 25 25 Internal diameter mm (inch) 4,7 4,7 Connection specification outlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm 25 25 Internal diameter mm (inch) 4,7 (0.19) 4,7 (0.19) Position of connectors Inline Inline Number of flow directions 4 4 Diameter drive shaft mm 7 7 Product wetted materials (standard): Pump housing SS316L SS316L Valve plate SS316L SS316L Diaphragms Santoprene Santoprene Valves EPDM EPDM O-rings EPDM EPDM Non-product wetted materials (standard): Pump housing SS316L SS316L Bearing housing SS316L SS316L Base plate SS316 SS316 Hood SS316 SS316 Dimensions pump with motor and housing: Length mm (inch) 257 (10,2) 277 (10-91) Width mm (inch) 164 (6,5) 200 (7,87) Height mm (inch) 185 (7,2) 195 (7,67) Weight pump with motor and housing kg (lb) 9,8 (22) 11,2 (25) IP protection class pump IP 54 54 Operating temperature range °C (°F) 0…40 (32…104) 10…30 (50…86)

Dimensions (WxDxH): 1200 x 750 x 1550 mm Internal dimensions (WxDxH): 1130 x 560 x 1000 mm Excluding (more) fan

This Bio-Rad DNAEngine Peltier Thermal Cycler Model PCT0200 was removed from a university lab where  (more)it was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks. It is fitted with a 96 well block.

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. Included are; 4 x ESI Nuclear scaler - timer - ratemeter 2454 x S&amp;J Juniper Standard hotplates with aluminium top plate4 x Farnell Proto-Board 203A solderless bread board2 x Bowens Espirit 500 professional photography lighting flash headElga Elgastat UHQPS water purification systemGenomic Solutions vacuum pump 6035A080Techne TC-3000 FTC3/02 thermal cyclerEriComp Power Block ll system easy cycler4 x Irwin Croydon Type J1 MKlll power supply unitsBayer DCA 2000+ analyserApplied Biosystems 2720 thermal cyclerLabnet Multigene gradient thermal cycler TC9600-G (locked)Thermo Hybaid SPRT001 Issue 2 PCR spring authorised thermcyclerNaiad Technologies DabOut system PN DO-C DO-LVS-CShimbo SMS-200B stroboscopeTechne Dri-Block DB-3A FDB03ADGrant Type QBT2 digital block heaterGrant 38L water bath with GD120 heater-stirrer2 x Grant Type JB1 heated waterbathSorvall TFT 70.38 70,000rpm fixed angle centrifuge rotor 8 x 25mm tubesMitsubishi P93E monochrome thermal printerOerlikon Leybold vacuum exhaust filter AF16LKB Bromma Model 11800 ultramicrotome system pyramitomeJob lot water baths, heater elements and pumps

Biobase BJPX-I Series refrigerated incubator. Capacity of 80, 100, 150, 200, 250, 300 or 400 L. Forc (more)ed ventilation. Temperature range from 0℃ to 65℃. Stability ±1℃; uniformity ± 2℃. Overtemperature alarm. Timer from 0 to 9999 min. Liquid crystal display. Internal glass door. Stainless steel interior. Shelves 2 pcs/adjustable. White light and internal socket. Wheels. User manual. Optional: microprinter and USB port. The Biobase BJPX-I refrigerated incubator is suitable for water analysis and determination of BOD, bacteria, mold, microorganism cultivation, conservation, plant cultivation and reproduction experiments.

Ohaus ION-100A Static Ionizer Ion Generation Method DC Corona Discharge Ionic Concentration &gt;1x1 (more)06 EA/cm3 (10cm distance) Static Elimination Time 1s / 10 cm; 5s / 20cm Features - Neutralizes electrostatic charges to increase the accuracy of lab measurements - Fan-free DC Corona Discharge technology eliminates static without disturbing samples - Effective static removal range of 10 to 40 cm from the ionizer - Adjustable design for optimal alignment with OHAUS balances - Durable tungsten electrode probes with a lifespan of 15,000 hours - Compact and space-saving footprint, ideal for laboratory environments - Rapid static elimination time: approximately 1 second at 10 cm, 5 seconds at 20 cm The ION-100A Ionizer is a compact, versatile device designed to enhance the accuracy of lab measurements by neutralizing electrostatic charges that can interfere with weighing results. It is particularly effective in low-humidity environments where static can cause significant errors, especially when weighing fine powders or small samples. Utilizing fan-free DC Corona Discharge technology, the ION-100A generates positive and negative ions to eliminate up to 99% of static charges without disturbing delicate samples. This ionizer is adjustable for optimal alignment with OHAUS balances, features durable electrodes with a long lifespan of 15,000 hours, and offers a wide effective range of 10 to 40 cm, making it an essential tool for precise laboratory work. Click Here to View Product Video INCLUDED: The Ohaus ION-100A Static Ionizer includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty