Mettler Toledo Multimax Dispenser for ReactIR Automatic Reactor System

This listing is for a 1KG Weight. The unit is in full working condition and is ready for immediate  (more)release.

This listing is for a Sartorius YCW6228 2KG E2 Weight. The unit is in full working condition and is (more) ready for immediate release. The Sartorius YCW6228 2kg E2 Weight is a high-precision cylindrical calibration weight, designed to meet the stringent requirements of OIML Class E2 standards. Constructed from highly polished, non-magnetizable stainless steel, this weight offers excellent corrosion resistance, making it suitable for use in sensitive lab environments. It is ideal for calibrating precision balances and other analytical instruments. Key Features: OIML Class E2 for high accuracy in calibration. Material: Polished stainless steel, non-magnetizable, and corrosion-resistant. Density: 7.95 g/cm³. Nominal Mass: 2 kg. Comes in a high-quality protective case, with optional DAkkS calibration certificate available for compliance with international standards​. This weight is perfect for laboratories that require precision in quality control processes, such as GLP and GMP environments.

PT0453 Cable is used to connect the 5Y series balance or the PUE CY10 terminal to a PA-04/H Automati (more)c Feeder. Its standard length is 2 m.

RS 232 cable: scale (15-pin connector) – computer (9-pin connector). Cable length: 10 m. Custo (more)mized cable length (extra charge): 2 m, 5 m.

Radwag laboratory holders have been designed to facilitate faster and more convenient weighing. They (more) ensure perfect and safe fixing of small vessels of typical and non-standard shapes. Features: Maximum weighing ergonomics Direct dosing of a sample into a vessel High efficiency, lower costs (minimized potential loss of samples during transfer) Direct dosing of samples into various vessels (test tubes, round flasks, flat flasks, plastic test-tubes, titration vessels) Laboratory holders are compatible with all Radwag analytical balances. Intended use: round flasks - 50, 100 ml

A stent is a type of prosthesis that is placed inside a blood vessel to restore its patency. Stent D (more)ozens of lives are saved thanks to it. Its shape, size, and weight must be matched to the blood vessel. In addition, the stent application site requires attention to sterility. These properties necessitate the use of balances with the highest resolution for the inspection of stents. The stent weighing kit has been designed to ensure that such a delicate sample, a stent, is weighed with the greatest precision possible, yet in an easy and ergonomic manner. The said precision is obtained thanks to the XA 5Y.M.A.S. microbalances, and ergonomics due to the specially designed weighing pan and additional draft shields. The weighing pans that are part of the kit allow for weighing stents of different sizes, including 5.5 × 140 mm, 6 × 60 mm, 8 × 40 mm, 8 × 40 mm, 19 × 10 mm, and 1.6 × 19 mm. Thanks to the well-thought-out design of the kit and its applicators, the user places the stent on a special tray, which increases ergonomics and eliminates cross-contamination. The stent weighing kit includes 7 items: draft shield base, 2 draft shields, 2 fork-shaped stent weighing pans: for small (1) and large (1) stents, 2 stent applicators: for small (1) and large (1) stents. Due to the different shapes and sizes of stents, two types of weighing pans, dedicated covers, and size-appropriate applicators come standard with the kit. The RADWAG-manufactured microbalance is a versatile solution. Therefore, it can be operated by a right- or left-handed person. The overall design of the kit, i.e. a fork-shaped weighing pan with an additional draft shield, has eliminated the difficulties associated with weighing of a small-weight sample of a relatively large volume such as stent. With this, the stent weighing results are obtained with an accuracy equal to that of the balance. The kit is intended for all load capacities of the XA 5Y.M.A.S. series balances.

The Cole Parmer type Masterflex L/S hose pump is ideal for pumping corrosive, abrasive and viscous l (more)iquids without damaging the pump. The Cole Parmer Masterflex L/S can also be used in the pharmaceutical and biopharmaceutical industries. This hose pump can be used in combination with the L/S 13, L/S 14, L/S 16, L/S 25, L/S 17 and L/S 18 hoses. Speed: 10 – 600 rpm Pump head type: 7518-00 Hose range: L/S 13: 0.06 – 36 ml/min L/S 14: 0.21 – 130 ml/min L/S 16: 0.80 – 480 ml/min L/S 25: 1.7 -1000 ml/min L/S 17: 2.8 – 1700 ml/min L/S 18: 3.8 – 2300 ml/min

Beckman Coulter Optima L-100 XP Ultra Centrifuge This item was removed from a university laboratory  (more)where it was surplus to requirements. It is in good cosmetic condition with minimal signs of general use.The unit reached its maximum rotor speed of 32,000 rpm quickly and consistently, and temperature testing confirmed it reached both 0ºC and 37ºC without issues. The lab confirmed it was in good working order prior to removal Specifications:- Model: Optima L-100 XP - Rotor Max Speed: 32,000 rpm - Temperature Range Tested: 0ºC to 37ºC In good working condition with efficient rotor and temperature functionality.

BIOBASE BKQ-350SD-B large horizontal autoclave. Double door. Built-in steam generator. Capacity: 352 (more)L. Loading by car and trolley (included). Nine preset sterilization cycles, two test cycles and one auxiliary cycle: textile material at 121 ºC and 134 ºC, instruments at 121 ºC and 134 ºC, liquids at 121 ºC, plastic material at 121 ºC, glass and other solids at 121 ºC , Bowie-Dick test; leak test and program to be defined by the user. Camera and stainless steel cover. Automatic door closing. Illuminated indicators for door closing, running and end of cycle. Lifespan of about 10 years (20,000 cycles). Meets GMP requirements, CE marked. Water purification system, compressor and installation not included. Optional baskets and data-logging system. Camera size: 600 * 600 * 980mm. External size: 1286 * 1848 * 1240mm. Power consumption: 24Kw. Power supply: 380V, 50Hz.

C32 series is an advanced but at the same time an easy-to-use weighing instrument that can be operat (more)ed in various industry areas. To ensure precision, speed and excellent measurement repeatability, high quality electronic components are used. Software Integrated battery and wireless data transmission enable portable operation. Complex software allows carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. C32 series devices feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution assure easy and clear transmission of data on current process. Colour bar graph signals whether the weighing result is within declared thresholds thus significantly influencing performance. C32 weighing instruments cooperate with RLAB software for collecting, presenting and carrying out statistical analysis of measurements sent by the weighing equipment. The software enables advanced functions for generating and customizing graphs and reports. Programmable keypad Complex 22-key keypad features programmable function keys which enable its customization. Integrated infrared sensors facilitate activation of basic functions without use of a keypad, this will be appreciated by the owners of high precision instruments. Cooperation C32 weighing instruments cooperate with barcode scanners and printers, this feature is especially important for those operators who use the instruments for parts counting or any tasks requiring clear-cut identification of measured products. Communication Wide range of communication interfaces ensures easy integration of C32 instruments with external master IT systems and trouble-free data exchange. Integrated inputs/outputs available in the basic version of the weighing instrument enable cooperation with external devices, i.e. control buttons, light signalling towers, buzzers and any other controlling/signalling devices. They also provide the ability to control uncomplicated dosing processes. Database Various permissions levels assure safety of stored data and prevent unauthorized operators from modifying the settings. Complex databases of products, packaging and customers are very important for operators working with wide range of products and having an extensive sales network. Broad range of maximum capacities and readabilities guarantees selecting the right model for a particular application.

THBR BOX is an autonomous measuring device operating in a local computer network. THBR Box enables c (more)ollecting ambient conditions measurements, storing the database, sending customized warnings and alerts and generating website for accessing measurements and settings. THBR Box There are three models of the recorder: with an integral screen, with a separate screen, without a screen. Communication with THBR BOX can be established wireless or via Ethernet. The module enables direct connection with up to 4 sensors. With use of USB hub it is possible to connect greater number of sensors. Each sensor has its own identification number that is assigned to measurements saved to the database. THBR Box features the following connectors: 4xUSB, HDMI, Ethernet. The device is powered using external micro USB 5V 2A power supply. Data stored by the THBR Box can be presented via THBR Multi software, website or Android application.

Self-centering weighing pan of a floating nature is intended for APP KO comparator. It is used inter (more)changeably with a standard weighing pan. The “floating” weighing pan is installed in course of a manufacturing process therefore remember to order it when purchasing the APP KO comparator as it is not sold separately. The pan has been designed to aid the operator stabilize and level weights that are located eccentrically. Additionally it helps to place eccentrically group of weights, total mass of which equals reference weight mass. The pan surface is covered with cork featuring marks that determine position of particular weights.