Climet Model CI-95+ Microbial Air - Sampler Lab

This listing is for a Lion Mark II Formaldemeter.The unit is in full working condition and is ready  (more)for immidate realese.The Lion Formaldemeter MK11 is a specialized instrument designed for measuring formaldehyde concentrations in various environments. This meter is essential for professionals in fields such as environmental monitoring, industrial hygiene, and health and safety compliance. Here are some key features and considerations regarding its use:Key Features:Service and Calibration: The Lion Formaldemeter MK11 can be serviced and calibrated at any general service facility that is equipped to handle PPM Formaldemeters and Glutaraldemeters. This ensures reliable performance and accurate readings over time.Phenol Filters: The device includes the option to fit phenol filters over the sampling nozzle. These filters are crucial for preventing saturation, thereby ensuring accurate and reliable readings. It is recommended to replace these filters approximately every 10 samples to maintain optimal performance.Cross-Sensitivity: Users should be aware that the Formaldemeter may exhibit cross-sensitivity to other volatile aldehydes and alcohols. This characteristic can potentially affect the accuracy of measurements, so it is important to consider the presence of these substances in the environment being tested.Calibration Warning: For accurate calibration, it is critical to avoid using interference gases. Calibration should always be performed under controlled conditions to ensure the integrity of the measurements.Applications:The Lion Formaldemeter MK11 is ideal for a variety of applications, including:Environmental monitoring in workplaces and laboratoriesAssessing formaldehyde levels in building materials and indoor air qualityCompliance testing for health and safety regulations

TCR TECORA  Echo HiVol Hi Volume Sampler System with Accessories This was removed from a univer (more)sity lab where it was surplus to requirements. The system consists of; 1 x Echo HiVol Hi Volume SamplerModel, Echo Hi Vol110VThe unit powers on and is in good cosmetic condition. It was powered on by our Step down from the mains supply (not included).The buttons seem a little slow to respond and there are some tape marks and scuffs and scratches around the unit from general use. The unit is lockable but no key is supplied. It is a barrel lock with the number 252. The barrel is easy to change and it should be easy to find a 252 key. 1 x Delta Wireless SamplerElectronic Flow Sampler w/ Battery packModel Delta110VThe unit powers on and is in good cosmetic condition. We did not charge Battery to test, as we used our Step down from the mains supply. (not included). 1 x Delta Battery packThe unit is in good cosmetic condition. It was not tested. 1 x Flight CaseThere is a large crack at the top of the flight case, but inside the case is in good cosmetic condition. Accessories:All the Accessories are housed in a flight case 1x TCR Fine PM Air Inlet - PM10 200 l/min1X Pair of Marigold industrial gloves (Size 9)1x Metal Dome2x Glass chambers4x keys1x High Volume Sampler for micropollutants Instruction Manual1x Delta Wireless Instruction Manual1x 16A -4h 100-130v 3pin IEC adaptor plug1x length of clear tubing 9.8mm outer diameter x 5.6mm inner diameter1x tripod arm with three prong grip1x widget-HO591X Delta Quick Guide1x TCR Tecora Delta Sampling config sheet1x bag of Flowmeter GR & GRV spares1x Metal Filter attachment The system was not tested further.

Emtek P100 Microbial Air Sampler Lab This item was removed from a university where it was surplus to (more) requirement. It is in reasonably good cosmetic condition and powers on, we are unable to test it further at our facility. As seen, there is damage sustained to the display screen, however, it does not impact its functionality. The Unit comes with a case, 18V Charger and a Remote

Emtek P100 Microbial Air Sampler Lab This item was removed from a university where it was surplus to (more) requirement. It is in reasonably good cosmetic condition and powers on, we are unable to test it further at our facility.

Climet Model CI-95+ Microbial Air Sampler Lab This item was removed from a university where it was s (more)urplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. This item does not include a battery pack and charger.

Climet Model CI-95+ Microbial Air Sampler Lab This item was removed from a university where it was s (more)urplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. This item does not include a battery pack and charger.

Speed range: 0 – 2.200 rpm Maximum permissible load: 6 kg Plate: 104 mm stirrer plate Dimensions (Wx (more)HxD): 126 x 80 x 140 mm Weight: 1.1 kg

Brinkmann CH-500 Column Heater This item was removed from a university lab where it was surplus to  (more)requirements. It is in good cosmetic condition but is missing a screw for the side panel. The unit powers up and is in full working order. It was tested with a digital thermometer (not included).

Hoefer™ miniVE electrophoresis unit. Vertical unit with gel size 10.0 cm wide × 8 to 10.5 cm long. T (more)ank volume 1.7 L. with one module and 1.2 L. with two modules installed. Maximum operating temperature 75ºC. For use only with dilute aqueous solutions between pH 2 and pH 12. Not compatible with organic solvents or concentrated alcohols, acids, bases and oxidizing agents. Dimensions (WxDxH) 192 × 172 × 188 mm. 1.2kg. Includes 2 gel modules, safety cap and reservoir The Hoefer miniVE electrophoresis unit is a compact and efficient device that allows you to separate DNA, RNA and protein molecules in agarose or polyacrylamide gels. With capacity for up to 2 gels at a time, this system is ideal for laboratories with limited space that require accurate and reproducible results in their molecular biology analyses. Furthermore, its intuitive and easy-to-use design makes it an indispensable tool for researchers and technicians in the field of genetics and biotechnology.

Ohaus STLC2DG Large Capacity Magnetic Stirrer, 120V Speed Range 100 rpm to 1,800 rpm Maximum Capacit (more)y 200L Plate Size 21.25 in x 25 in Features - High Volume Stirrers (STLC1DG and STLC2DG) with a 100 or 200 L capacity are made with a stainless steel base offering durability and stability, and feature a 54 x 63 cm stainless steel top plate. - High Volume Stirrers (STHVAL and STHVDG) have a large 32 x 28 cm top plate that is chemical-resistant with a white reflective surface that is easy to clean. - Digital and nondigital models allow you to choose the right model for your application. - Speed ramping feature slowly increases the motor speed for improved safety and enhanced coupling. - Avoids splashing, improves spin bar control and provides excellent low-end speed control. The OHAUS STLC2DG Large Capacity Magnetic Stirrer has a stirring capacity up to 200L, ensuring your large volume samples are processed with ease and consistency. The broad top plate surface allows processing of oversized vessels such as carboys for your large volume stirring. The powerful magnetic drive is additionally capable of mixing highly viscous materials, making the STLC2DG an incredible fit for a variety of laboratory stirring applications. INCLUDED: The Ohaus STLC2DG Large Capacity Magnetic Stirrer, 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Hermle Z327 Centrifuge Speed Range 200 to 18,000 RPM Maximum Capacity 4 x 200ml Warranty 5 Year Manu (more)facturer's Features - Maintenance-free induction drive - Microprocessor with large LCD display - Motor driven lid lock - Automatic radio-frequency rotor identification system (RFID) with over speed protection, immediately upon rotor insertion - Active imbalance identification and cut-off (rotor specific) - A large variety of rotors and accessories - Audible signal at the end of each run with several melody options - Noise level under 63 dBA at max. speed - Manufactured according to international safety regulations, i.e. IEC 61010 - Rotor exchange is easy to handle - Optimized airflow system keeps the samples cool (Z327) - Stainless steel chamber Both the Z327 and the refrigerated Z327-K offer a wide assortment of rotor options (up to 19), making them ideal for a wide variety of research applications. Rotor exchange between swing out, micro, or high-volume fixed angle rotors is very simple and can be done in a matter of seconds. The Z327-K features rear mounted refrigeration system, optimized for saving space on the lab bench at only 40 cm wide! Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z327 Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty