Gilson PIPETMAN M P20M BT Connected, 2-20uL Pipette

Gilson MyPIPETMAN Select Multichannel P12x200, 20-200 uL PipetteFeatures - Designed to be ergonomic, (more) safe, and reliable while remaining lightweight and well-balanced - Elegant design with textured effect for better grip - Built-in ejection system with an integrated lever provides reduced tip ejection forces compared to direct ejection systems - Trilock volume-locking system enables users to choose different positions when setting the volume - Fully autoclavable without disassembly for maximum convenience and protection from contamination - Complies with the requirements of the ISO 8655 standard - Volume range of 20 to 200 uL - 3 Year Manufacturer's Warranty

Gilson MyPIPETMAN Select Multichannel P8x200, 20-200 uL PipetteFeatures - Designed to be ergonomic,  (more)safe, and reliable while remaining lightweight and well-balanced - Elegant design with textured effect for better grip - Built-in ejection system with an integrated lever provides reduced tip ejection forces compared to direct ejection systems - Trilock volume-locking system enables users to choose different positions when setting the volume - Fully autoclavable without disassembly for maximum convenience and protection from contamination - Complies with the requirements of the ISO 8655 standard - Volume range of 20 to 200 uL - 3 Year Manufacturer's Warranty

Gilson PIPETMAN G P10G, 1-10 uL, Metal Ejector PipetteFeatures - Made of PVDF and stainless steel, P (more)IPETMAN Goffers premium durability - One of the lowest pipetting forces commercially available - redesigned piston assembly system and high-quality piston grease,PIPETMAN G guarantees hours of comfortable pipetting. - N G clipejector allows for convenient access to serviceableparts. - Pipettes come in either single or multichannel models equipped with metaltip ejectors - Volume range of 1 to 10µL - 3 Year Manufacturer's Warranty

Gilson PIPETMAN G P2G, 0.2-2 µL, Metal Ejector PipetteFeatures - Made of PVDF and stainless steel, P (more)IPETMAN Goffers premium durability - One of the lowest pipetting forces commercially available - redesigned piston assembly system and high-quality piston grease,PIPETMAN G guarantees hours of comfortable pipetting. - N G clipejector allows for convenient access to serviceableparts. - Pipettes come in either single or multichannel models equipped with metaltip ejectors - Volume range of 0.2 to 2µL - 3 year manufacturer's warranty - Optional accessories allow for greater comfort while pipetting - Multi-colored heads allow for quick and easy pipette exchange PIPETMAN® G brings a new level of comfort into Gilson range with a redesigned piston mechanism that reduces the force needed to aspirate and dispense liquids. PIPETMAN G maintains the trusted durability, accuracy, and reliability of the original PIPETMAN pipettes with comfort. PIPETMAN G offers one of the lowest pipetting forces commercially available. With a redesigned piston assembly system and high quality piston grease, PIPETMAN G guarantees hours of comfortable pipetting. PIPETMAN G relies on the legendary accuracy, precision, and reliability of PIPETMAN with improved pipetting comfort. Made of PVDF and stainless steel, PIPETMAN G offers premium durability. The PIPETMAN G clip ejector allows for convenient access to serviceable parts. CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson PIPETMAN G P2G, 0.2-2 µL, Metal Ejector Pipette includes: - Operator's Guide - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Dispensette BRAND DISPENSETTE 1-5ML volume range: 1-5ml Without purge valve

The AP-12.1.5Y is the first automatic device designed to calibrate single- and multi-channel micropi (more)pettes with [d] 1 µg, in accordance with ISO 8655 requirements. Pipette calibration can be performed in the volume range from 0.5 μl a maximum of 12 channels of fixed and variable volume pipettes. The impressive calibration readability is the result of the co-called separation chamber which stabilizes the measurement path and protects it from excessive air movement. This is a guarantee of high precision measurements. AP-12.1.5Y guarantees the comfort of work. The ergonomic design of the device makes it possible to empty weighing vessels, and their overfilling is signalled by Ambient Light. When calibrating a multichannel pipette, a pump is used to simultaneously remove water from four vessels, greatly reducing the time required for pipette calibration. Other factors that affect the ergonomics of work: compact, mobile design clear, intuitive multilingual menu data security transfer of results directly to the customer’s computer application internal procedure report automatic periodic adjustment of the device. After emptying a 12-channel pipette, the AP-12.1.5Y checks all channels in a single cycle. In addition to a database of pipette calibration reports, the AP-12.1.5Y includes a database of pipettes that is editable and contains maximum permissible error values according to ISO 8655. The report database, in turn, contains measurements and error values calculated for individual points and volumes. The user determines the format and content of the reports. The AP-12.1.5Y monitors the ambient conditions using calibrated sensors: THB S (ambient conditions measurement) and THB W (liquid temperature measurement), in accordance with ISO 8655. To calibrate the device with mass standards, the weighing pan must be replaced with a pan dedicated to checking and calibrating the balance (both are included in the standard equipment). When purchasing the AP-12.1.5Y, you get: two calibrated sensors: THB S and THB W, two weighing pans: standard, and for balance test and calibration, a pump equipped with two nozzles: to draw water from one container or from four containers at once, a brush, a pincette, a vessel for the liquid, the Calibration Certificate for the balance.

Perkin Elmer ProScanArray HT Microarray Scanner This was removed from a university lab where it was  (more)surplus to requirements. The unit powers up but has not been tested further at our facility. It is in great cosmetic condition with minimal wear.

Infors AEROTRON Shaker Incubator This was removed from a university lab where it was surplus to requ (more)irements. The unit does not power up. It is sold for spares/repairs. We think this unit would make for a great movie prop.

Hermle 4 x 250ml Swing Out Rotor The Hermle 4 x 250ml Swing Out Rotor is a centrifuge rotor compatib (more)le with Hermle Z366 series centrifuges. It has a maximum speed of 4,500 RPM and can generate a maximum RCF of 3,780 x g. This rotor can hold a capacity of up to 4 x 250ml, making it useful for processing medium-volume samples. The swing-out design of the rotor simplifies loading and unloading samples while ensuring efficient separation of particles into distinct layers. The rotor is made from high-quality materials to ensure its durability and reliability. INCLUDED: The Hermle 4 x 250ml Swing Out Rotor includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Memmert IF160 Forced Circulation Incubator 161L, 115V Working Temperature Range Min. 10°C above amb (more)ient up to +80°C Convection Type Forced Air Chamber Volume 161 L (5.7 cu.ft.) Features - Setting temperature range from +20°C to +80°C with a working range starting at Min. 10°C above ambient - Volume of 161 L (5.7 cu.ft.) with a reinforced stainless steel interior - ControlCOCKPIT adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display - Adjustable parameters include temperature (Celsius or Fahrenheit), fan speed, air flap position, and program time - Forced air circulation by quiet air turbine, adjustable in 10% steps with pre-heated fresh air admixture - Safety features include an adjustable overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 - Easy-to-clean stainless steel interior reinforced with deep drawn ribbing and integrated large-area heating on four sides The Memmert IF160 Forced Circulation Incubator 161L, 115V is designed to offer precise temperature control with a setting range from +20°C to +80°C and a working range starting at Min. 10°C above ambient. Its spacious 161 L (5.7 cu.ft.) stainless steel interior, reinforced with deep drawn ribbing, ensures durability and easy cleaning. Equipped with the advanced ControlCOCKPIT digital PID-microprocessor controller and a high-definition TFT-color display, this incubator allows users to adjust parameters such as temperature (in Celsius or Fahrenheit), fan speed, air flap position, and program time for optimized functionality. The IF160 also features forced air circulation through a quiet turbine, adjustable in 10% steps, and pre-heated fresh air admixture for enhanced performance. Safety is prioritized with an adjustable overtemperature monitor, mechanical temperature limiter TB, and autodiagnostic system for fault analysis. Additionally, it supports AtmoCONTROL software for efficient data management. With a maximum chamber load of 462 lbs across 8 shelves and a range of user-friendly features, this incubator provides precise and reliable incubation for various laboratory applications. INCLUDED: The Memmert IF160 Forced Circulation Incubator 161L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The Biometra Fastblot is intended to be used for electroblotting. Electroblotting has become an impo (more)rtant method transferring proteins from polyacrylamide gels onto nitrocellulose, nylon or other membranes. Conventional blotting (tank blotting) is performed in a big buffer chamber and the procedure is very buffer and time consuming. The more recent method of semi-dry blotting between carbon plate electrodes allows a more rapid and homogeneous transfer. Warming up of the apparatus and blot-sandwich during the transfer at high current conditions or during blotting of native proteins can be compensated by the internal cooling system. Electrode surface: 160 x 200 mm