Gilson PIPETMAN G Multichannel P12x20G, 2-20 uL Pipette

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Micropipettes GILSON P200 (20-200 μl). Sand supply CALIBRATED, sterilized and free of RNAsas.

XA17 pipette calibration adapter enables calibration and/or verification of piston pipettes by means (more) of a gravimetric method using the XA analytical balence. Set content: base weighing pan weighing vessel evaporation ring glass chamber with an opening for dosing Evaporation ring is an integral part of the adapter that increases relative humidity inside the weighing chamber. With this evaporation of the liquid during calibration/verification is stopped. An integrated weighing pan enables centric loading of the vessel in the weighing chamber. The weighing pan and the vessel are housed in a glass chamber featuring an opening allowing the user to dispense liquid through it, and reducing air drafts. Vessel capacity: 17 ml Adapters for Pipettes Calibration Pipette calibration adapters are intended for calibration and verification of piston pipettes using gravimetric method. Use of the pipette calibration adapter reduces maximum capacity of the balance by the mass of the weighing vessel. The table below, which presents the minimum requirements in accordance with ISO 8655-6:2022 standard, enables to select suitable adapter for pipette calibration and respective balance version. The parameters of the balance have been selected so that the expanded uncertainty of measurement in use is less than ¼ of the maximum permissible error of the test object. Nominal volume of apparatus under test V Resolution (d) mg Repeatability (s)3mg Recommended balance Microbalances Analytical balances 0,5 µl ≤ V < 20 µl 0,001c 0,01d 0,006c, e 0,03d MYA 21.5Y XA 6/21.5Y.M.A XA 6/21.5Y.M XA 21.5Y.M.A XA 21.5Y.M XA 21/52.5Y.M.A XA 21/52.5Y.M XA 53.5Y.M.A XA 53.5Y.M 20 µl ≤ V < 200 µl 0,01 0,025 XA 52.5Y XA 110.5Y XA 82/220.5Y.A XA 82/220.5Y XA 120/250.5Y.A XA 120/250.5Y 200 µl ≤ V ≤ 10 ml 0,1 0,2 Adapter for pipette calibration MY 11 XA 11 XA 11 XA 11 XA 11 XA 17 XA 17 XA 17 XA 100 XA 17 XA 100 Maximum vessel capacity 11 ml 11 ml 11 ml 11 ml 11 ml 17 ml 17 ml 17 ml 100 ml 17 ml 100 ml Weighing vessel mass ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 11 g ~ 11 g ~ 11 g ~ 65 g ~ 11 g ~ 65 g a The repeatability values, in this table, apply in the volumen determination of a single channel pipette. When a single-channel balance is used for volumen determination of single channel pipettes the repeatability values are double the values of this table. c Single-channel balance. d Multichannel balance, only valid for multi-channel pipettes. Multi-channel balances of 0,01 mg readability may be uses to test multi-channel pipettes with nominla volumes below 20 µl only if the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. e For single-channel pipettes of nominal volumes of less than 2 µl, a balance with repeatability better than the values in the table shall be used so that the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. table {font-size: 12px} td {padding:10px; } tr {text-align:center;} @media (max-width: 800px) { table {font-size: 9px} td {padding: 1px 1px} }

IKA Pette Vario 2 - 20ul Pipette Features - Improved ergonomics as a result of replaceable handles  (more)ensures precise and repeatable results - Comfortable and rapid adjustment of the pipetting volume - Set volume can be read off the display in large figures at any time - Pipette tip is ejected quickly and without time-consuming hand repositioning simply by pressing the central multifunction button - Piston and tip cone are made from DLC-coated (Diamond Like Carbon) stainless steel which exhibits high levels of wear and corrosion resistance - Anti-friction properties allow the pipette to require to be re-greased on rare occasions - No tools are needed for adjusting/calibrating the IKA Pette - Simplified acquisition, documentation, and monitoring with the serial number being accessed from the scannable QR Code - Can be autoclaved at 121C in a complete or dismantled state - All IKA Pette models are compatible with universal fit pipette tips from most manufacturers IKA Pipettes include three interchangeable handles in various different shapes and materials. The choice of the right handle for your particular hand means the pipette can be adadpted to suit your individual requirements Pipetting volume is adjusted in two stages (fine and coarse) with the ability to lock or unlock the volume needed. All volume adjustments can be completed easily by the user with just one hand Easy disassembly for simple maintenance and cleaning. The volume unit with piston and seal can be replaced completely in just a few hand movements. Upon re-assembly, an audible "click" is heard to ensure the pipette is secure Lies comfortably in your hand with uncompromising precise performance: The IKA PETTE vario single-channel pipettes are used for many different applications in the modern laboratory. Color-coding simplifies rapid selection of the right pipette. The impact-resistant, UV-resistant and chemically resistant conical tip ensures reliable metering in the long-term.Click Here to View Product Videos INCLUDED: The IKA Pette Vario 2 - 20ul Pipette includes: - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Pette Vario 2 - 20ul Pipette SpecificationsAdjustable or Fixed VolumeAdjustable VolumePipette TypeMechanical Air DisplacementVolume Range2 - 20 µlIncrements0.02 µlAccuracy (Nominal Volume µl / %) ± 0.2 µl / 1%Precision (Nominal Volume µl / %)± 0.06 µl / 0.3%Accuracy (50% of Nominal Volume µl / %)± 0.12 µl / 1.2%Precision (50% of Nominal Volume µl / %)± 0.06 µl / 0.6%Accuracy (10% of Nominal Volume µl / %)± 0.1 µl / 5%Precision (10% of Nominal Volume µl / %)± 0.03 µl / 1.5%

Boekel Scientific 1372 Laboratory Pipette Dryer, 115VThe Boekel Scientific 1372 Laboratory Pipette D (more)ryer, 115V can process up to 200 pipets from 7mm diameter by 375mm long. The vented top and base provide continuous flow of air through drying chamber and pipettes dry in approximately one hour. Complete with neon pilot light, toggle switch and grounded plug. INCLUDED: The Boekel Scientific 1372 Laboratory Pipette Dryer, 115V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Accuris P7700-1000 NextPette Variable Volume Pipette, 100 to 1000ul Inaccuracy ± 1.5 to 0.6% Impreci (more)sion ± 1.0 to 0.6% Compatible Tip Size 1000ul Features - Market leading accuracy & precision - One handed volume adjustment - Convenient volume lock - Easily visible, 4 digit display - Ergonomic, thumb shaped plunger button The NextPette development project started with feedback from a wide range of researchers and technicians. The Accuris engineering team then set their sites on creating an ultra-lightweight, and ergonomic pipettor without any sacrifice in terms of durability, accuracy and precision. The NextPette incorporates many significant features and advantages truly appreciated by today's research laboratories.The easily accessible volume adjustment system reduces the time and inconvenience associated with volume selection. The uniquely positioned volume dial is located above the pipette handle, allowing for easy one handed adjustment with the user's thumb. The volume display is located on the side of the pipettor that faces the user. Unlike traditional pipettors, the NextPette does not require a second hand to rotate the pipettor 180° to observe the display.The NextPette also features an innovative, asymmetrical designed plunger button that can be rotated to match the comfort preference of the user. This button is freely adjustable to rotate continuously between wide setting, resulting in the more traditional feel of a round, larger diameter plunger button, or to a more narrow (thumb shaped) contour preferred by the majority of researchers.The NextPette's materials and components were carefully selected to minimize weight and ensure durability and a long service life. Internal components include precision plungers made of stainless steel (1ul, 10ul, 5000, and 10,000µl models) or ceramic (20ul, 200ul, and 1000ul models) and all use durable PTFE seals. The pipettors have also been designed with service in mind. They are easy to disassemble, and seals are easy to replace. Silicone lubricant is included with each pipettor. Recalibration can be done in the lab - no tools are required and the instruction manual includes full details on how to properly check pipetting accuracy and how to recalibrate if necessary. The entire pipettor is autoclavable at 121°C and resistant to UV exposure. All pipettes are factory calibrated in accordance with ISO 8655 standards and include a factory calibration certificate. INCLUDED: The Accuris P7700-1000 NextPette Variable Volume Pipette, 100 to 1000ul includes: - Calibration Certificate - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Mini heating plates and magnetic stirrers This ruggedly built OHAUS series of small instruments can  (more)heat and mix up to 1,000ml of water on their 102 x 102mm ceramic plate. They are perfect for school labs and other applications that require simple shaking and heating on a daily basis. All models are equipped with a support rod hook with a locking knob that accommodates the optional support rod kit. Stir models include a 38mm PTFE coated magnetic stir bar. Available models: Model with heating: up to 500°C. Fixed temperature model: 500°C. Model with stirring: 500°C. Model with heating and stirring: stirring from 100 to 1200 rpm; temp. up to 500°C. Applications Boiling water, solubilization buffers and reagents, preparation media, concentration samples Operation Detachable three-wire cable and plug (included) Structure Valox armor, knobs with basic controls, 3.8cm stir bar (included with stir models), On / Off toggle switch (fixed temperature models) ___________ Not sure which model to choose? Download the Ohaus Hotplate and Shaker Selection Guide for a quick overview of all available models.

CABINET CSB120 - CHEMISAFE Modular solutions for storing chemicals. - Entirely made of 15/10 mm thi (more)ck electrogalvanized steel sheet, cold bent - External finish made of 90 micron acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Monocoque construction with feet for leveling the cabinets - Simple single layer swing doors - Lock and key - Door opening at an angle of 110° - External zip in corrosion resistant plastic - Compartments equipped with fixed retention shelves made of plasticized/painted/stainless steel with adjustable height - Connection collar Ø 125 mm - Standardized pictograms according to ISO 3864 standards In dotazione: - 3 plasticized steel shelves (max load 80 Kg distributed evenly) Optional: - Shelves - Timer - Plinth - Retention tank - Door open alarm - Ventilation - Filter

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Benchmark TubeRocker Compact Rocker The TubeRocker Mini is designed to provide the ideal speed and t (more)ilt angle (24 rpm / 30°) for agitation of sample tubes. The grooved design of the included rubber mat properly secures all tube sizes ranging from 1.5 to 50ml, without the use of added straps or bands. There are no complicated controls, no settings or adjustments to be made; just press the power switch and let it rock. Small in size (only 5 x 13 inches) and able to withstand temperatures from 4ºC to 65ºC, the TubeRocker Mini is small enough to fit on any lab bench and can conveniently be placed inside a cold room, refrigerator or laboratory incubator. INCLUDED: The Benchmark TubeRocker Compact Rocker includes: - Rubber Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The Horizon 20-25 Horizontal Gel Electrophoresis Apparatus is designed for separation of preparative (more) and analytical quantities of nucleic acids. It is suitable for agarose gel electrophoresis procedures in which buffer circulation may be required. The Horizon 20-25 apparatus is designed for simplified gel casting and electrophoresis. This apparatus is engineered for durable performance and easy storage. Current range: 4 – 360 mA, 0.5 A max Voltage range: 250 VDC Max