Boeco SA Micropipettes 20-200 ál

Arise Biotech EzMate 601s Automated Pipetting System This was removed from a university lab where it (more) was surplus to requirements. The unit powers up and runs through calibration a self-tests without fault. There is no PC with the unit so we were unable to test it further. It is in good cosmetic condition with minor marks from use. Item does not include EzStarter Software or ACHM Control Box.

XA17 pipette calibration adapter enables calibration and/or verification of piston pipettes by means (more) of a gravimetric method using the XA analytical balence. Set content: base weighing pan weighing vessel evaporation ring glass chamber with an opening for dosing Evaporation ring is an integral part of the adapter that increases relative humidity inside the weighing chamber. With this evaporation of the liquid during calibration/verification is stopped. An integrated weighing pan enables centric loading of the vessel in the weighing chamber. The weighing pan and the vessel are housed in a glass chamber featuring an opening allowing the user to dispense liquid through it, and reducing air drafts. Vessel capacity: 17 ml Adapters for Pipettes Calibration Pipette calibration adapters are intended for calibration and verification of piston pipettes using gravimetric method. Use of the pipette calibration adapter reduces maximum capacity of the balance by the mass of the weighing vessel. The table below, which presents the minimum requirements in accordance with ISO 8655-6:2022 standard, enables to select suitable adapter for pipette calibration and respective balance version. The parameters of the balance have been selected so that the expanded uncertainty of measurement in use is less than ¼ of the maximum permissible error of the test object. Nominal volume of apparatus under test V Resolution (d) mg Repeatability (s)3mg Recommended balance Microbalances Analytical balances 0,5 µl ≤ V < 20 µl 0,001c 0,01d 0,006c, e 0,03d MYA 21.5Y XA 6/21.5Y.M.A XA 6/21.5Y.M XA 21.5Y.M.A XA 21.5Y.M XA 21/52.5Y.M.A XA 21/52.5Y.M XA 53.5Y.M.A XA 53.5Y.M 20 µl ≤ V < 200 µl 0,01 0,025 XA 52.5Y XA 110.5Y XA 82/220.5Y.A XA 82/220.5Y XA 120/250.5Y.A XA 120/250.5Y 200 µl ≤ V ≤ 10 ml 0,1 0,2 Adapter for pipette calibration MY 11 XA 11 XA 11 XA 11 XA 11 XA 17 XA 17 XA 17 XA 100 XA 17 XA 100 Maximum vessel capacity 11 ml 11 ml 11 ml 11 ml 11 ml 17 ml 17 ml 17 ml 100 ml 17 ml 100 ml Weighing vessel mass ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 11 g ~ 11 g ~ 11 g ~ 65 g ~ 11 g ~ 65 g a The repeatability values, in this table, apply in the volumen determination of a single channel pipette. When a single-channel balance is used for volumen determination of single channel pipettes the repeatability values are double the values of this table. c Single-channel balance. d Multichannel balance, only valid for multi-channel pipettes. Multi-channel balances of 0,01 mg readability may be uses to test multi-channel pipettes with nominla volumes below 20 µl only if the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. e For single-channel pipettes of nominal volumes of less than 2 µl, a balance with repeatability better than the values in the table shall be used so that the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. table {font-size: 12px} td {padding:10px; } tr {text-align:center;} @media (max-width: 800px) { table {font-size: 9px} td {padding: 1px 1px} }

Precision suction, error-free measurements The product is supplied with two internal pumps and two b (more)uilt-in buttons used to operate separate pumps. Backlit buttons inform you about operation of a specific pump. The set has two tips for sucking water out of a single beaker (one-channel tip) or four pipettes at a time (four-channel tip). Water is carried from both channels to the beaker through one tube. The power is provided to the pump through a USB A in the weighing terminal. You can supply power from the phone charger, for instance.

Gilson PIPETMAN G Multichannel P8x10G, 1-10 uL Pipette Designed PIPETMAN G brings a new level of com (more)fort into the Gilson range, with a redesigned piston mechanism that reduces the force needed to aspirate and dispense liquids. PIPETMAN G maintains the trusted durability, accuracy, and reliability of the original PIPETMAN pipettes with comfort. Pipetting ComfortPIPETMAN G offers one of the lowest pipetting forces commercially available. With a redesigned piston assembly system and high quality piston grease, PIPETMAN G guarantees hours of comfortable pipetting.Reliable ResultsPIPETMAN G relies on the legendary accuracy, precision, and reliability of PIPETMAN with improved pipetting comfort. Built-to-Last and ConvenientMade of PVDF and stainless steel, the PIPETMAN G offers premium durability. The PIPETMAN G clip ejector allows for convenient access to serviceable parts. CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson PIPETMAN G Multichannel P8x10G, 1-10 uL Pipette includes: - Operator's Guide - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Gilson PIPETMAN Classic P20 Pipette The PIPETMAN® Classic line is one of the world standards in pipe (more)tting and offers a wide range of continuously adjustable, air-displacement pipettes with legendary accuracy and precision. The PIPETMAN Classic line is available in eight single channel models covering a range of volumes from 0.2µL to 10 mL. Made of highly resistant materials like PVDF and stainless steel, PIPETMAN Classic offers uncontested durability and reliability. Built-to-last, it is the economical solution for years of pipetting. Routine cleaning and maintenance are all that is required to keep PIPETMAN Classic in top condition for years. The PIPETMAN Classic design allows for easy access to user-serviceable parts, along with a fully autoclavable tip holder and ejector. CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson PIPETMAN Classic P20 Pipette includes: - Operator's Guide - 3 Year Manufacturer Warranty Gilson PIPETMAN Classic P20 Pipette SpecificationsAdjustable or Fixed VolumeAdjustable VolumePipette TypeManual Air DisplacementVolume Range2 - 20 µLPipette ModelP20Pipette RangePIPETMAN ClassicNumber of Channels1Ejector TypeMetalPack Size1Pack Size UnitEachWarranty3 Years

Accuris P7700-1 NextPette Variable Volume Pipette, 0.1 to 1ul Inaccuracy ± 20 to 2% Imprecision ± 12 (more) to 1.2% Compatible Tip Size 10ul Features - Market leading accuracy & precision - One handed volume adjustment - Convenient volume lock - Easily visible, 4 digit display - Ergonomic, thumb shaped plunger button The NextPette development project started with feedback from a wide range of researchers and technicians. The Accuris engineering team then set their sites on creating an ultra-lightweight, and ergonomic pipettor without any sacrifice in terms of durability, accuracy and precision. The NextPette incorporates many significant features and advantages truly appreciated by today's research laboratories.The easily accessible volume adjustment system reduces the time and inconvenience associated with volume selection. The uniquely positioned volume dial is located above the pipette handle, allowing for easy one handed adjustment with the user's thumb. The volume display is located on the side of the pipettor that faces the user. Unlike traditional pipettors, the NextPette does not require a second hand to rotate the pipettor 180° to observe the display.The NextPette also features an innovative, asymmetrical designed plunger button that can be rotated to match the comfort preference of the user. This button is freely adjustable to rotate continuously between wide setting, resulting in the more traditional feel of a round, larger diameter plunger button, or to a more narrow (thumb shaped) contour preferred by the majority of researchers.The NextPette's materials and components were carefully selected to minimize weight and ensure durability and a long service life. Internal components include precision plungers made of stainless steel (1ul, 10ul, 5000, and 10,000µl models) or ceramic (20ul, 200ul, and 1000ul models) and all use durable PTFE seals. The pipettors have also been designed with service in mind. They are easy to disassemble, and seals are easy to replace. Silicone lubricant is included with each pipettor. Recalibration can be done in the lab - no tools are required and the instruction manual includes full details on how to properly check pipetting accuracy and how to recalibrate if necessary. The entire pipettor is autoclavable at 121°C and resistant to UV exposure. All pipettes are factory calibrated in accordance with ISO 8655 standards and include a factory calibration certificate. INCLUDED: The Accuris P7700-1 NextPette Variable Volume Pipette, 0.1 to 1ul includes: - Calibration Certificate - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Carbolite GLM 1 Muffle Furnace This was removed from a university lab where it was surplus to requir (more)ements. The unit powers up and is in good working order (Max temp 1200˚C). It is in reasonably good cosmetic condition with minor marks.

Scale WPY for statistic control WPY/PGC is equipped with modules that put packed products control in (more)to practice. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after controlling pre-defined quantity of packages (samples). Number of the packages is fixed by scale program depending on product batch size. Scales are equipped with 5,7" colourful, graphic touch screen display for previewing information concerning currently performed control and its result. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for prepacked products control report. The report is automatically saved in scale memory and at the same time it can be printed by printer connected to scale. Scale coupling with computer program enables: keeping weighing records from successive weighments in the database, automatic printout of control processes from computer software level, sending user defined codes from scale to computer software; the codes match weighed product (product code, operator code, batch quantity, batch no., control Start/Stop), defining product codes and their descriptions (names) from the level of computer program, therefore user can assign an individual product name suitable for the company's branch. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).

Scilogex SK-O180-S Orbital Digital Shaker The Scilogex SK-O180-S Orbital Digital Shaker features a b (more)acklit LCD display for speed and timer, maximum load of 6.6lbs, 50-200 rpm shaking speed range, and timer or continuous operation. Comes with an anti-slip platform for culture flasks and straps to secure tubes. INCLUDED: The Scilogex SK-O180-S Orbital Digital Shaker includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Max capacity: 6x 50 ml Allowed density: 1.2 kg/dm³ Speed: 18000 rpm Force: 25718 rcf Kinetic energy: (more) 8100 Nm Dimensions (WxDxH): 275 x 330 x 247 mm Weight: 11 kg Equipped with: 1x Hettich 1114 swing out rotor (max 5000 rpm) 8x Hettich 1122 bucket (tube capacity (ØxL): 17.5 x 53 mm)