Applied Biosystems Hitachi 3130 Genetic Analyzer Lab

AB Applied Biosystems Hitachi 3130xl Genetic Analyser This system was removed from a university lab, (more) where it was surplus to requirements. It is in good cosmetic condition but has not been powered on at our facility due to restrictions around Class 3 Lasers. The previous owner confirmed it was in good working order prior to removal. Specifications: - Serial No. 17215-001 - Year 2005 Included:2 x 96 well plate retainer Part No. 43172412 x 96 well pate retainer Part No. 431723742 x 96 well plate mats1 x lower polymer block cleaning kit12 x cleaning swabs1 x 20ml Norm-Ject syringe1 x cable3 x power cables4 x spare water and buffer reservoirs5 x small bore pipes with end fittingsSeveral small seals and pipe fittings

This listing is for a Qiagen QX Buffer Tray.The unit is in full working condition and is ready for i (more)mmediate release.The Qiagen QX Buffer Tray is an essential component of the QIAxcel DNA Kits, specifically engineered for streamlined automated DNA fragment analysis using the QIAxcel instrument.Key Features:Pre-Filled Buffers:The buffer tray comes pre-filled with all necessary buffers required for DNA fragment analysis, including the proprietary QX Buffer essential for optimal performance.Compatibility:Specifically designed to be compatible with the QIAxcel instruments, ensuring seamless integration and operation.Part of QIAxcel DNA Kits:It is a fundamental part of the QIAxcel DNA Kits, facilitating automated processes for reliable and consistent DNA analysis.Proprietary QX Buffer:The QX Buffer enhances the analytical capabilities of the QIAxcel System, improving resolution and accuracy in DNA fragment sizing.Usage Instructions:Loading:Begin by loading the gel cartridge along with the pre-filled buffer tray into the QIAxcel instrument.Filling:Follow the manufacturer’s instructions to ensure the buffer tray is filled and loaded properly, which is crucial for accurate results.Process Selection:Select the desired process profile on the instrument for the type of analysis you wish to conduct.Analysis Run:The QIAxcel instrument will automatically dispense the buffers from the tray and perform the DNA fragment analysis, streamlining the workflow.

Qiagen QIAcube Automated DNA / RNA Purification Robot This was removed from a university lab where i (more)t was surplus to requirements. It is in good cosmetic condition internally and externally, other than a missing panel covering the power button. Error 5167 happens when attempting to close the centrifuge lid because it is stuck open.Error with the centrifuge: cover opens before lid moves. We were unable to test this further. Therefore this item is sold as Spares or Repairs.

Qiagen Pyromark Q96 ID System Lab This item is sold on behalf of a client. It is surplus to requirem (more)ents. It is in good cosmetic condition and full working order. It is available for collection from London, UK, but we may be able to offer shipping for an additional fee.The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Perkin Elmer Chemagic 360 DNA Extractor Magnetic Separator Lab This item was removed from a universi (more)ty where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. Also includes the following: - Chemagic 96-rod head - Instruction manual - Dell Optiplex 3070 PC with Chemagic Software - Keyboard - Mouse - Touch-screen monitor - 18 x 96 well microplates/holders - 2 x Newland wired scanners with stands

This system was removed from a lab as it was no longer required. It was in full working order prior  (more)to removal from the lab. An engineer from Pacific Biosciences prepared the system for removal from the lab, including removing all the systems cladding, but unfortunately had to cut a few cables between the main unit and the environmental chamber. Whilst the blade server is included with the system, it has been wiped, so software may need reinstalling if you intend to use the system in full again. Strangely the information plate on the back of the unit just says 'PacBio RS' and not 'PacBio RS II' as would be expected, but the lab called it an RS II, and the cladding on the front says RS II, so we presume this is RS II. The engineer said that whilst getting the unit up and running again might be difficult, there is an enormous value of the system in parts. Apparently the camera part alone cost £125k. We have not removed any parts from the system whatsoever.

ZWIEBEL calibration weight 10mg class E2 INOX Stainless steel laboratory calibration weight Brand: Z (more)WIEBEL Weight: 10 mg Type / class: E2 maximum permissible error: ± 0.008mg Weight checked on a precision balance at 0.0001g (0.1mg) - see photo In its plastic box uncalibrated weight

Techne’s Dri-Block heaters provide a safe, dry, constant temperature source in the laboratory. The u (more)nit can be used for incubation, boiling, inactivation, wet ashing, sample concentration, enzyme analysis and many other clinical and industrial purposes. Working temperature range: Ambient to 100°C Temperature stability: ±0.05°C at 40°C Temperature stability: ±0.1°C at 100°C Temperature setting: 3 push buttons Temperature display: 4 digit LED Set point resolution: 0.1°C Set point accuracy: ±1°C Temperature variation: 0.2°C at 40°C Heat up time 30°C to 37°C: 8 min Heat up time 30°C to 56°C: 9 min Heat up time 30°C to max: 12 min Dimensions (H x W x D): 105 x 240 x 202 mm

Heraeus Sorvall 75006444 5650rpm 2x500g Swinging Bucket Centrifuge Rotor Lab This was removed from a (more) university lab where it was surplus to requirements. The unit is in good cosmetic condition but has not been tested. No buckets are supplied. Maximum RPM: 5650. Maximum Load: 2 x 500g.

NesLab CryoBath CB-60 Refrigerated Water Bath Chiller This was removed from a university lab where  (more)it was surplus to requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks.

The HX7 H is a mechanical design combining into one a PUE HX7 terminal and a 4-load-cell platform, b (more)oth made of stainless steel. High protection class, IP66 / IP68, makes the HX7 H a scale that can be used in harsh industrial conditions. 4 load cells guarantee correct weighing regardless of load placing at the platform. Equipment The scale provides 7" colour graphic display and a bar graph consisting of 9 diodes emiting red and green light. The bar graph is a graphic visualisation of the current net weight referred either to the scale range or predetermined min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as: barcode scanners, printers, external displays, control buttons, light signalling towers, controlling/signalling devices, systems for automatic process control, superior IT systems. With use of the bracket you can either place the terminal at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Databases The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Terminal’s system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety.

Benchmark BenchMasher 400 Labaratory Paddle Blender with incubation and UV Chamber Decon The BenchMa (more)sher™ provides fast and effective mixing, ensuring consistent homogenization. It is ideal for preparation of samples were eliminating contamination is critical, such as pathogen and microbial detection in food and water filters. The BenchMasher also has applications anywhere larger solid samples need broken down or products such as powders and polymers need mixed. Samples up to 400ml are conveniently loaded in the sterile blender bags which are sealed upon closing the door. Mixing paddles rapidly strike the bags, producing thorough mixing and homogenization without ever directly contacting the sample. Programming is user friendly – mixing speed and cycle time are easily adjusted on the large, full color touch screen. Paddle position can be adjusted to ensure efficient processing of samples. For applications requiring thermal regulation (such as Trichinella testing in meat) the chamber can be heated and maintained at temperatures up to 65°C. The door is removable for access to the chamber and stainless steel mixing paddles. Each paddle includes a convenient rubber cover that is easily removed or replaced. A UV light (254nm) is built into the chamber and can be activated at any time to perform complete decontamination.INCLUDED: The Benchmark BenchMasher 400 Labaratory Paddle Blender with incubation and UV Chamber Decon includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty