LAUDA Hydro H24 water bath

Water bath from 25°C to 100°C for the laboratory The water baths of the LAUDA Hydro series are the i (more)deal tools for any laboratory application, whether biological, medical or biochemical and guarantee a homogeneous temperature distribution without overheating problems. High quality stainless steel and thoughtful design, provide the ideal depth and opening for any application with bathroom volumes from 4 to 41 liters. All water baths offer a temperature range up to 100°C, with a temperature stability of ±0.1K, so that applications even in the boiling range are possible. A TFT color display ensures intuitive operation with temperature display in °C and °F. Application examples - Preparation of cellular, biological or medical samples - Microbiological test incubation - Thawing of the samples - Conducting chemical reactions Notable features - Three timer functions for the user - Electric resistance inside the tank - Direct temperature control for fast and precise heating - Visual and acoustic alarm in case of lack of water, low / high temperature and sensor break - Digital and electromechanical safety system - Lid designed to prevent condensation from dripping onto samples - Exhaust valve on all models Standard equipment - Lid and drain tap in heat-insulating double-walled stainless steel Accessories available Water level regulator. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Dump valve on all Hydro Lauda models. Simple control panel with large TFT display with extensive information; change settings and navigate quickly and easily. Optical and acoustic alarm for low water level and over/under temperature as well as sensor breakage/short circuit. Optimized space, safety and comfort of use. Connection for water level regulator (available as accessory). Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Water bath from 25°C to 100°C for the laboratory The ring baths for columns, Erlenmeyer flasks or be (more)akers are suitable for continuous operation, even unattended, thanks to the standard level and lack of water monitoring. LAUDA Hydro ring water baths are available in five models, all featuring a removable perforated lid with a set of heat-resistant plastic rings. - Operations in a temperature range from 25 to 100°C. - Models H 11 V, H 19 V have been specially designed for safe use in fume cupboards. - The housings are made of stainless steel to allow their use even with chemically aggressive fluids. - Temperature regulation by knob with graduated scale - Lid with set of rings for opening the modular tank - Water level and lack control, for continuous unattended operations - The support rods (length 600 mm, diameter 12 mm), made of stainless steel, are included as standard - Hydro is protected against dry running by an electro-mechanical valve. In case of low water, the heating is stopped In the photo, simple control panel, with knob, graduated scale, warning light and safety valve. Ring opening, to adapt to different types of glassware. Standard water level regulator for continuous operation, even unattended. Safety system in case of water shortage LAUDA evaporization baths are protected against dry running by a cut-off device for lack of water (thermostatic overvoltage). The nut located on the control panel will be used to disarm the security system. Water level regulator as standard Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Histological water bath from 25°C to 80°C for the laboratory This water bath model is used in histol (more)ogical, chemical, clinical and bacteriological laboratories for stretching and drying tissue samples. The exact temperature control of the LAUDA Hydro H 2 P water bath ensures clear visibility of the sample and gentle drying even on the heated edge. The instrument operates in a temperature range from 25 to 80°C with a constant temperature of ± 0.5 K. The body of the bath is made of black anodized aluminum. The low height of the bowl allows comfortable and safe work. - Temperature adjustment by knob with temperature scale - Temperature display by means of a reference thermometer on the edge of the pool - Tank interior in black anodized aluminum If you want to know more about water baths in histopathology and new histotechnologies in general, we recommend the HistoTube YouTube channel. Accessories Lid, to cover the bath interior, made of black anodised aluminium, with ball handle.

Water bath from 25°C to 100°C for the laboratory The water baths of the LAUDA Hydro series are the i (more)deal tools for any laboratory application, whether biological, medical or biochemical and guarantee a homogeneous temperature distribution without overheating problems. High quality stainless steel and thoughtful design, provide the ideal depth and opening for any application with bathroom volumes from 4 to 41 liters. All water baths offer a temperature range up to 100°C, with a temperature stability of ±0.1K, so that applications even in the boiling range are possible. A TFT color display ensures intuitive operation with temperature display in °C and °F. Application examples - Preparation of cellular, biological or medical samples - Microbiological test incubation - Thawing of the samples - Conducting chemical reactions Notable features - Three timer functions for the user - Electric resistance inside the tank - Direct temperature control for fast and precise heating - Visual and acoustic alarm in case of lack of water, low / high temperature and sensor break - Digital and electromechanical safety system - Lid designed to prevent condensation from dripping onto samples - Exhaust valve on all models Standard equipment - Lid and drain tap in heat-insulating double-walled stainless steel Accessories available Water level regulator. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Dump valve on all Hydro Lauda models. Simple control panel with large TFT display with extensive information; change settings and navigate quickly and easily. Optical and acoustic alarm for low water level and over/under temperature as well as sensor breakage/short circuit. Optimized space, safety and comfort of use. Connection for water level regulator (available as accessory). Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The OHAUS Defender 5000 Series is an ideal bench scale for many industrial applications including ma (more)nufacturing, packaging, inventory and shipping, it also features advanced features such as highly configurable print output, GMP/GLP data output, library/user management, and multiple connectivity options. • LARGE CONTROL PANEL • STAINLESS STEEL PLATFORM • EASY DATA MANAGEMENT STANDARD FEATURES THE INDICATOR GUIDES YOU THROUGH THE ON-SCREEN MESSAGES The results appear clearly on the large backlit display. The alphanumeric keyboard and function keys simplify the user experience. On-screen messages and keys will guide you step by step during use. RUGGEDLY BUILT TO WITHSTAND HARSH INDUSTRIAL ENVIRONMENTS Ruggedly constructed with a stainless steel platform, painted steel frame and aluminum load cell, the Defender complies with OIML/CE approvals. Thanks to this, the Defender 5000 can be used for both general purpose and legal-for-trade applications. For standard industrial applications, Defender 5000 bench scales offer consistent performance at a very attractive price. basic structure? Removable stainless steel weighing pan with coated steel frame, silicone sealed IP67 aluminum load cell. MULTIPLE APPLICATION MODES AND LARGE STORAGE CAPACITY FOR GREATER FLEXIBILITY The indicator has the most common industrial modes and supports an archive of 50,000 articles and 1,000 user profiles that can be downloaded/uploaded for easy configuration (with SD card). It also features GMP/GLP with time/date function for results traceability. Multiple connectivity options for simple and convenient data transfer and storage The results can be stored in the Micro SD card. Data transmission via standard RS232 or optional interfaces including RS232/RS485/USB device, Ethernet and Bluetooth/WiFi, analog output and discrete I/O with relay. NEW TD52 INDICATOR THE INDICATOR GUIDES YOU THROUGH THE ON-SCREEN MESSAGES Results appear clearly on the large backlit LCD matrix display. The alphanumeric keyboard and keys simplify the user experience, guided step by step during use. Multiple application modes and large storage capacity for greater flexibility The indicator has the most common industrial modes and supports an archive of 50,000 articles and 1,000 user profiles that can be downloaded/uploaded for easy configuration (with SD card). It also features GMP/GLP with time/date function for results traceability. Multiple connectivity options for simple and convenient data transfer and storage The results can be stored in the Micro SD card. Data transmission via standard RS232 or optional interfaces including RS232/RS485/USB device, Ethernet and Bluetooth/WiFi, analog output and discrete I/O with relay. APPLICATIONS Weighing: calculation of the weight of the items in the selected unit of measure. Piece Counting: piece counting with uniform mass. The advanced automatic optimization software recalculates the average piece weight as a function of the increase in the overall mass. Checkweigh / Piece Check: Compare the weight/count of a sample against the set limits. Connection to discrete I/O kit and light tower for external control lamps. Percent Weighing: Calculation of the percentage of a sample weight relative to a pre-set reference weight. Dynamic weighing and display hold: calculation of an unstable load. The balance determines the average of several masses weighed over a certain period of time. The display hold function freezes the last stable mass manually and automatically on the display. Alongside the images of the control panel; in ABS above and below the stainless steel version. The different models of the Defender 5000 series are distinguished by the capacity/resolution, by the type of control panel (standard or in stainless steel), by the size of the surface and by the type of scale, flat or column. Models starting with D52P have ABS plastic panel and D52XWxxxx models have stainless steel control panel. SCALES WITH FRONT CONTROL PANEL: COLUMN MOUNTED SCALES: CONTACT US! For the prices of the individual models or for any further information, do not hesitate to contact us! Our specialists will answer you as soon as possible and will be happy to answer all your requests.

BUCHI Kjeldahl Sample Tubes / Matra Set of 4 standard tubes Never used (in the origin box) 300ml BUC (more)HI 077377