All categories

Insta NX® Mag32 Automated Nucleic Acid Extractor is a modern bench top magnetic bead based system fo (more)r DNA and RNA purification from a wide range of samples. With built-in magnetic rods to transfer particles through the entire process of purification starting from binding, mixing and washing to elution, it reduces manual intervention to a bare minimum. This hassle-free extraction system helps one to obtain fine quality ultra-pure DNA and RNA that can be directly used for further downstream processing. Features 1. Large 7” touch screen for ease of operation 2. Quick extraction protocols, 13-40 minutes / cycle depending on the sample type and method 3. Pre-installed programs for effortless extraction of nucleic acid 4. In-built sterilization with UV lamp to avoid contamination 5. Compact and closed design to prevent any possible injuries 6. Capable of processing up to 32 samples per run with initial sample volume up to 400μl. Weight - 51KGDimensions - 67cmL x 53cmW x 70cmH

The HI98192 instrument is state-of-the-art, heavy-duty conductivity meter, designed to provide labor (more)atory results and accuracy under harsh industrial conditions. The USP standard compliance makes the instrument useful for pure water determination. It is provided with a series of new diagnostic features which add an entirely new dimension to the measurement of conductivity, by allowing the user to dramatically improve the reliability of the measurement: • 7 memorized standards (0.00 μS/cm, 84.0 μS/cm, 1.413 mS/cm, 5.00 mS/cm, 12.88 mS/cm, 80.0 mS/cm and 111.8 mS/cm) for calibration. • EC calibration up to five calibration points. • Messages on the graphic LCD for an easy and accurate calibration. • Diagnostic features to alert the user when the electrode needs cleaning. • User-selectable “Outside Calibration Range” warning. • User-selectable “calibration time out” to remind when a new calibration is necessary. Moreover, they offer an extended temperature range from -20.0 to 120.0 °C (-4.0 to 248.0 °F), using temperature sensor inside EC electrode. This instrument can also measure in Resistivity, TDS and Salinity ranges. Three salinity modes are available: % NaCl, Practical salinity and Natural seawater scale. Other features include: • Temperature source selection • Temperature automatic compensation, linear or non linear user selectable • Temperature reference selection 15 °C, 20 °C or 25 °C. • Temperature coefficient set • Log on demand up to 400 samples • Auto Log feature up to 1000 records • Auto Hold feature, to freeze first stable reading on the LCD • Lock and user setup Fixed range selection • GLP feature, to view last calibration data for EC, NaCl • Probe change recognition • PC interface • Probe replatinizationWeight 2.9KG Dimensions - 43cmL x 30cmW x 9cmH

Techne® have upgraded our established thermal cycler range to provide easier programming and increas (more)ed instrument flexibility. The Prime range has been designed to enhance the user experience with an outstanding touch interface and identical software for all models. The new range provides high performance and exceptional value.Weight - 12KG Dimensions - 50cmL x 30cmW x 40cmH

The world's first patented Tube Mill control is a batch mill with disposable grinding chamber. Elimi (more)nates possibility of cross-contamination and the effort of cleaning. The grinding chamber and cover are made of a transparent material so grinding tests can be observed at any time. The mill can be used for hard (Mohs hardness up to 5), dry and brittle materials. It is especially suitable for grinding seeds, such as corn and wheat. During development of the mill, particular emphasis was placed on security. The mill will only start when the hood is closed. When the grinding chamber is not inserted properly or not closed properly, the drive unit will display an error message and the drive will not start. During operation, the grinding chamber cannot be opened. The drive and the grinding chambers are secured with a labyrinth seal. No dust can escape from the chamber or penetrate the drive.- Clearly arranged, multilingual OLED-display- Timer, adjustable from 5 s to 3 min- USB interface for control and documentation of all the parameters- Interval operation available- Infinitely variable speed from 5000 to 25000 rpm- Various operating modes- Adjustable safety speed- Adjustable safety time- Programmable and storable test conditions- Error Code Display- Reproducible test results- Easy operation with touch keypad- Dust proof sealedWeight - 5KGDimensions - 35cmL x 26cmW x 46cmH

BioStar™ 50 bioburden test system is an easy to use,compact system, specially designed for using dis (more)posable funnels for microbial load testing. This system obviates the need of separate vacuum sources and manifolds, and minimizes the required work space and arrangement time.The pump can be operated touch free with a motion sensor which offers the microbiologist increased convenience and flexibility in sample filtration. The long battery run time ensures convenient use without power supply as well. The clear silicone drainage tubing is highly user friendly.Touch free operationCompact, portable battery operatedAutoclavable SS 316L funnel adapterEasy filtrate drainageLED light indication- Green/Red/Orange for ON/OFF and battery charging respectivelyWeight 1KGDimensions - 21cmL x 20cmW x 25cmH

The Genlab range of Classic Incubators offers a selection of highly efficient, reliable and cost eff (more)ective units to suit most biological analysis, research and general laboratory applications.The simple thermostat system is easy to use and the units can be built up to meet individual requirements.Weight 29KGDimensions - 58cmL x 30cmW x 66cmH

Total organic carbon analyzer SHIMADZU TOC-VWP With ASI-V automatic sampler TOC-VWP: Wet oxidation (more)/NDIR method, PC-controlled Model : TOC-Vwp Measurement Method : Wet oxidation/NDIR Operation Method : PC-controlled Measured Items : TC,IC,TOC,NPOC Applicable Samples : Aqueous sample Measurement Range : TC:0 to 3500 / IC:0 to 3500 Detection Limit : 0.5 µg/L Measurement accuracy (Responsibility) : CV 1.5% max / CV 2% max at 1000 mg/L or higher Measuring Time : TC: approx 4 mins / IC: approx 4 mins Sample Injection : Automatic Injection Sample Injection volume : 350 to 20400 µl variable IC pre-treatment : Automatic internal acidification and sparging Automatic dilution : Dilution factor 2 to 50 Operating Keys : Use PC Display : Use PC Printer : PC printer Ambient temperature range : 5 to 35 deg C Power supply : AC 220 ~ 240V ± 10%, MAX 350 VA Dimensions : Approx. (W)440 x (D)560 x (H)460mm Weight : Approx. 40 kg With ASI-V automatic sampler Without computer With software TOC-Control V 2.60 on USB Key

2 CP-8400 parts chromatograph autosamplers and an old VARIAN / BRUKER model For parts

2 GC 3800 Gas Chromatographs for VARIAN parts Without Software Without a computer For parts

SP SCIENTIFIC GeneVac EZ-2 Envi Model Personal Evaporator Model : EZ-2.3 Envi model (EZ-Envi) is re (more)commended for concentration of volatile solvents Without condenser Jar Without vacuum pump

ELEMENTAR Vario Macro Cube Analyzer for Parts Year of manufacture: 2010 For parts

ELEMENTAR Vario Max analyzer for parts Year of manufacture: 2014 For parts

Mass detector VARIAN Saturn 2000 for CP3800 Gas Chromatographs parts Without Software Without a comp (more)uter For parts

DIONEX ICS 2000 Ion Chromatography System RFIC + ASE 200 Lab Tabletop Accelerated Solvent Extractor  (more)for parts 2 Modules dionex for parts only

Extractor hood Captair Flex M 481 ERLAB The Captair Flex M481 series comply with AFNOR NF X 15-211 s (more)tandards Product type: Hood Phenolic resin work top with integrated retention tray 1 lamp Cable routing on left and right sides Anemometer Front air speed control External dimensions 1275 x 686 x 1160 / 1345 mm Internal dimensions 1240 x 522 x 860 mm Noise level 58 dbA Panels and facade 6 mm synthetic glass Air speed between 0.4 and 0.6 m/s With metal table included Delivered without filters and disassembled, easy assembly using twenty Teflon screws This hood is designed for molecular filters and HEPA H14 filters Equipment tested Some signs of wear on the steel sheet parts and on the synthetic lenses

Gilson Pipetman P200 Laboratory Pipette Variable volume pipette 20-200 µl Not calibrated

Gilson Pipetman P10mL Laboratory Pipette Variable volume pipette 1 - 10ml Not calibrated

HERMLE ZK-401 Refrigerated High Performance Centrifuge Maximum speed: 24,000 rpm Max. centrifugal fo (more)rce : 70,965 g (depending on rotor) Maximum filling quantity: 3000.0 ml (with suitable rotor) Power supply: 380V/50 Hz (CEE32 socket) 19.5A 11.0kVA Three-phase Dimensions: L x W x H = (825 x 765 x 940) mm Mass: approximately 320 kg Sound level: 69 dB(A) Setting temperature range: -20ºC to +40ºC Year of manufacture: 1990 Operating hours: 1403h With 5 rotors (4 fixed angular + 1 rotor with oscillating buckets): 2 X Fixed Rotor A12.17 Max speed: 16500 rpm For 12 tubes 1 X Fixed Rotor A6.14 Max speed: 14400 rpm For 6 tubes 1 X Fixed Rotor A8.24 Max speed: 24000 rpm For 8 tubes Equipment tested: 10000 revolutions => OK Cold group => OK Note: Commissioning must be carried out by a technician specialized in this type of high performance centrifuge

Dynamic PCR hood ERLAB Biocap RNA DNA Captair ORGANIC For HEPA H14 filter (filter not replaced) Embe (more)dded vertical laminar flow Interior dimensions: 600x601x565 mm UV lamp with timer Power supply: 230 V. 50 Hz. 26 W Transparent acrylic walls, be careful, presence of numerous microcracks (see photos) Acrylic thickness: 10mm Total electrical power: 73W

Millipore Milli-Q Advantage A10 Water Purification System with Pod Model: Z00Q0V0T0 Included : - P.O (more).D. - Wall Mount Without tank Without Q-Gard T1 purification cartridge Without Quantum TEX polishing cartridge Missing some connections Height: 49.7 cm Width: 33.2 cm Depth: 36cm Operating weight: 19 kg Water production (l/min): Up to 2 l/min Year of commissioning: 2011

KERN T572-39-A laboratory balance 4200g - 0.01g Model: 572-39 Scale used only a few times, new condi (more)tion. Year of manufacture: 2023 With its original packaging Technical parameters: Readability: 0.01 g Linearity: ± 0.05 g Maximum capacity: 4200g (4.2kg) Tray dimension: Ø 15 cm Dimensions (L x D x H): 225 x 315 x 100 mm Weight: 2.3Kg Material tested

11175712 Lids for THERMO T41 Laboratory Centrifuge Buckets Set of 4