Covaris S2 Focused Ultrasonicator with Grant LTC1 Water Bath Lab

Capacity: 17 L Max temperature: 100°C Max flow rate: 17 L/min Max pump pressure: 300 mbar Dimensions (more) (DxWxH): 457 x 381 x 456 mm Weight: 13.7 kg

Lauda Eco Gold with Lauda Eco RE 420 Refrigerated Water Bath This was removed from a university lab  (more)where it was surplus to requirements. The unit powers up and is in good working order. (Digital thermometer used for testing not included). It is in good cosmetic condition with minor marks.

Yamato REV-202M Rotary Evaporator with Vacuum Regulator, Water Bath, and Selectable Glassware, 115V  (more)Speed Range 5 to 315 RPM Evaporation Capacity Up to 23 ml/min Pressure Setting Range 0 to 1013 hPa Features - Rotate faster & slower (315 RPM – 5 RPM) than any other rotary evaporator on the market to test new SOPs and develop better methods - Unit is easy to disassemble and clean after use - Program rotation direction changes, ramps, and other automations to get more done in the lab at once - Automatic on/off and suction speed adjustment via wireless vacuum controller - Easily analyze the residue left over after distillation - Orient for left or right-handed operation based on your limited bench space Standard rotary evaporator designed with vacuum controller and a slide jack mechanism for convenient height adjustment. Set includes the VR102S Vacuum Controller, BM302-A Water Bath, and your choice of glassware. Market leader in rotation speed range at 5 to 315 RPM. Designed with set inversion function where glassware and bath can be set on either side, left or right, depending on user’s dominant hand and installation location. Standard equipped with condenser insulation kit to suppress condensation on the condenser’s surface. INCLUDED: The Yamato REV-202M Rotary Evaporator with Vacuum Regulator, Water Bath, and Selectable Glassware, 115V includes: - Glassware Set Selected Above - VR102S Vacuum Regulator - BM302-A Water Bath - Rotary Joint - 1L Evaporation Flask - 1L Receiving Flask - Ball Joint Clamp - Flask Clip - Vacuum Seal - Condenser Insulation Kit - Condenser Bracket (Only for Glassware Sets B & C) - Hex Wrench - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato RE-202-A Rotary Evaporator with Water Bath and Selectable Glassware, 115V Speed Range 5 to 3 (more)15 RPM Evaporation Capacity Up to 23 ml/min Rotation Modes Forward/Reverse/Auto Inversion Features - Rotate faster & slower (315 RPM – 5 RPM) than any other rotary evaporator on the market to test new SOPs and develop better methods - Unit is easy to disassemble and clean after use - Program rotation direction changes, ramps, and other automations to get more done in the lab at once - Automatic on/off and suction speed adjustment via wireless vacuum controller - Easily analyze the residue left over after distillation - Orient for left or right-handed operation based on your limited bench space Standard rotary evaporator designed with a slide jack mechanism for convenient height adjustment. Set includes the BM302-A Water Bath and your choice of glassware. Market leader in rotation speed range at 5 to 315 RPM. Designed with set inversion function where glassware and bath can be set on either side, left or right, depending on user’s dominant hand and installation location. Standard equipped with condenser insulation kit to suppress condensation on the condenser’s surface. INCLUDED: The Yamato RE-202-A Rotary Evaporator with Water Bath and Selectable Glassware, 115V includes: - Glassware Set Selected Above - BM302-A Water Bath - Rotary Joint - 1L Evaporation Flask - 1L Receiving Flask - Ball Joint Clamp - Flask Clip - Vacuum Seal - Condenser Insulation Kit - Condenser Bracket (Only for Glassware Sets B & C) - Hex Wrench - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato CB-100 Benchtop Water Circulator 3.4L, 115V Cooling Capacity 230W at 10C Operating Temperat (more)ure Range -10 to 80°C Temperature Accuracy ±0.1°C Features - High head and flow rate: Lift is ~3.3/4.7m (50/60 Hz), which is very high in this class, so even piping with pressure loss can be circulated sufficiently. In addition, the maximum flow rate is as large as ~6.8/8.0L/min (50/60 Hz).The lift and flow rates allow stable circulation even when installed under a desk. - Easy to clean intake filter: Filter mounting plate located on the front of the unit can be easily removed when cleaning - Standard equipped with drain: Maintenance work such as replacement of liquid can be easily performed. After use, it can be stored in the space inside the main unit. - Nozzle can be used in any orientation: Since the nozzle is freely rotatable, it can be installed in any direction - Compact: With a width of 180mm and a depth of 360mm, it is ideal for limited spaces - Low GWP value that is friendly to the global environment: Since the alternative CFC refrigerant R-134a is used, the global warming potential is as low as 1430, good for the global environment. Benchtop 3.4L water circulator with a wide temperature range of -10 ~ 80°C used for various applications. I's high head and flow rates allow stable circulation even when placed under a desk.INCLUDED: The Yamato CB-100 Benchtop Water Circulator 3.4L, 115V includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Benchmark MyBath 8L Digital Water Bath The myBath series is designed to guarantee superior accuracy  (more)and performance in a compact footprint. With four sizes to choose from, there is a myBath to fit every lab. The 8L model includes easy to use controls allow the user to digitaly select and monitor settings. Adjustable in 0.1ºC increments, the temperature is shown on a large, 3-digit display. The proprietary Quik-CAL feature allows for simple, in-lab calibration. High efficiency insulation maintains temperature stability and uniformity within the bath, while keeping the housing cool to the touch. All myBath models feature seamless, stainless steel chambers for easy cleaning and long life The chambers resist rust and have no corners to collect dirt or contamination. The 8L unit has drains for hassle-free water changes and includes a see-through cover that can be removed, or flipped back on a rear hinge to conserve bench space. The lid’s gabled design will divert condensation to the front and back of the bath, away from samples. Racks are available to accommodate 1.5/2.0ml, 15ml and 50 ml tubes. INCLUDED: The Benchmark MyBath 8L Digital Water Bath includes: - Cover - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Hybaid Maxi 14 Rotisserie Hybridisation Oven This was removed from a university lab where it was sur (more)plus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order when heated to 36ºc, when set to 100ºc item would not climb beyond 60ºc. The shaking plate and Rotisserie shaker are both in good working order. It is in reasonably good cosmetic condition with surface damage present.

Prior PL012 Binocular Microscope With 4 x Objectives This item was removed from a university lab whe (more)re it was surplus to requirements. It powers on and is in reasonably good cosmetic condition. The fine adjustment mechanism is struggling to catch slightly but remains functional. Includes 4 x objectives:- EA 100 Oil 1.25 160/0.17 - EA 4 0.10 160/- - EA 10 0.25 160/- - EA 40 0.65/0.17 Includes 2 x WF 10X/20 Eyepieces. Model: PL012S/N: 57418

E1-class mass standards are the elite in the world of metrology, because standards of this class rep (more)resent the highest level of precision and accuracy in mass measurement. The E1 classification is one of the most stringent standards that standards must meet in order to be considered the most advanced and trustworthy measurement tools. E1 - class standard: stainless steel wire Nominal value: 20 mg Material: stainless steel What Are the Characteristics of the E1 Class? Highest Precision - The allowable deviation from the actual weight is minimal, making standards of this class ideal for applications where every gram matters. Stability and Repeatability - This guarantees a consistent level of accuracy over the long term. Accurate Calibration - Standards of this class must be regularly compared with other standards of known mass to confirm their measurement accuracy. Materials with Unique Properties - E1 class mass standards are often made of materials with exceptional physical properties, which makes them stable and resistant to changes in environmental conditions. Application 1. Analytical Laboratories In analytical laboratories where accurate measurements are crucial, E1 class mass standards are used to calibrate balances with the highest precision. 2. Pharmaceutical Industry In drug manufacturing, where even the slightest deviation from the standard affects quality, E1 class mass standards are irreplaceable. 3. Scientific Research In scientific research, especially in areas requiring the highest precision, such as physics or chemistry, E1 class mass standards are used to ensure reliable results. 4. Metrology Industry In metrology laboratories where research on E1 class mass standards alone is carried out, E1 class standards are the standard of excellence. Class E1 mass standards are not only measuring tools, but also a symbol of metrological excellence. Their use affects the quality of measurements in various areas of life because they provide precision that can be relied upon. They are a key element in the world of mass measurement, shaping standards and raising the bar for all measurement tools.

HX7 H scale’s multi functions Many functions, many interfaces and great robustness (IP66/ IP68 (more)) mean many possibilities for you to use this advanced scale. Tomorrow you can apply it to a different process than today – that’s the multifunctionality. That’s the saving! Use the potential Barcode scanners, receipt printers, label printers, external displays, control buttons, light signalling towers and other controlling/ signalling devices – thanks to multipurpose software, HX7 scale can work with all of them. You can easily connect them thanks to the fact that the balance is equipped with interfaces: RS232, RS485, USB, Ethernet, 4 IN/ 4 OUT. Optionally, the balance can be equipped with 12 IN/ 12 OUT and analog output module. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Easy and pleasant Simple and convenient operation with a 7-inch color display. Perfectly visible messages additionally supported by bargraph. The top part of the operation panel features a bar graph consisting of 9 red and green diode fields. The bar graph is a graphic visualisation informing the user on a current net weight of a product presented with reference to the scale range or declared min and max thresholds. The bracket allows the terminal to be placed on any flat horizontal surface or screwed to the wall with adjustable angle. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The construction of the scale is made of a stainless steel. This guarantees you work for many years. Not just weighing But also parts counting, dosing, percent weighing and formulations. The power of HX7’s working mods. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Referring to stored weighings you can generate weighing reports, formulation reports and reports on performed control processes. Single weighing is stored in the ALIBI memory as long as it is specified by a Weighing Storage Period (days) parameter.

Hermle COMBI-Rotor 24 x 1.5/2.0ml and 4 x PCR strips with Quick-Lock lid, hermetically sealed (for Z (more)216 series only) The Hermle COMBI-Rotor 24 x 1.5/2.0ml and 4 x PCR strips with Quick-Lock lid, hermetically sealed is a centrifuge rotor designed specifically for use with Hermle Z216 series centrifuges. It has a maximum speed of 15,000 RPM and can generate a maximum relative centrifugal force (RCF) of 21,631 x g. The rotor can hold up to 24 standard 1.5/2.0ml tubes and 4 strips of 8 PCR tubes each, making it a versatile option for various laboratory applications. The rotor has an angle of 45°, which is ideal for pelleting and separating samples efficiently. The hermetically sealed Quick-Lock lid ensures secure and safe sample handling, preventing aerosol contamination. Overall, the Hermle COMBI-Rotor 24 x 1.5/2.0ml and 4 x PCR strips with Quick-Lock lid is a reliable and efficient option for laboratory centrifugation needs. INCLUDED: The Hermle COMBI-Rotor 24 x 1.5/2.0ml and 4 x PCR strips with Quick-Lock lid, hermetically sealed (for Z216 series only) includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark SB-12L Shaking Water Bath This compact shaking water bath utilizes the well proven, belt-l (more)ess motor drive system from the popular Benchmark Orbi-Shaker Series, with the addition of precision temperature control up to 80C. The seamless, stainless steel chamber has a 12 liter capacity and includes a universal spring-loaded platform for securing 15 & 50ml test tubes, as well as Erlenmeyer flasks and media bottles up to 1 liter. A hinged and removable lid is also included to reduce energy waste, prevent splashing and divert condensation away from samples. Easy to use controls allow the user to digitally select and monitor time, temperature and shaking speed, while a constant monitoring system ensures accuracy over each parameter.INCLUDED: The Benchmark SB-12L Shaking Water Bath includes: - Universal Spring Loaded Platform - Bath Lid - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty