Heidolph Incubation Hood (flat)

Sartorius Certomat BS-1 Incubator Shaker This was removed from a university lab where it was surplus (more) to requirements. The unit powers up and is in working order, but it is out of calibration by a few ˚C. It will require calibration upon installation. The service menu is password-protected. The shaker is in good working order. The system is in good cosmetic condition with minor marks.. This is the heating only model. It will not refrigerate.

Yamato IC-603CR General Purpose Incubator with Communication Port 159L, 115V Temperature Range Ambi (more)ent +5°C to 80°C Temperature Distribution Accuracy ± 1.0°C Chamber Volume 159L Features - Space saving - All lab incubator models come with either an observation window (W) for improved visibility or solid door - Dual door system permits contents to be viewed easily without disrupting atmosphere of the lab incubator (except IC-100 series) - Control panel of IC103C/113C located at a higher position for easy access - Easy to use digital setting display and timer - Air jacket technology ensures even and efficient heat distribution throughout the lab incubator chamber - Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock - Models 400 to 900 have an option for communication port (R) Economical general purpose 159L natural convection incubator with observation window. The dual door system permits contents to be viewed easily without disrupting the atmosphere of the incubator. Easy to use digital setting display and timer. Air jacket technology ensures even and efficient heat distribution throughout the chamber. Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock. Operating temperature range: +5~ 80°C. INCLUDED: The Yamato IC-603CR General Purpose Incubator with Communication Port 159L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert IPP260eco Peltier-Cooled Forced Circulation Incubator 256L, 115V Setting Temperature Range  (more)Ambient 0°C to 70°C Convection Type Peltier Fan Forced Circulation Chamber Volume 256 L (9 cu.ft.)cu.ft.) Features - 256 L volume capacity with precise temperature control - Setting temperature range from 0°C to +70°C for versatile applications - Energy-saving Peltier heating/cooling system for efficient temperature regulation - ControlCOCKPIT digital controller with high-definition TFT-color display - Process timing starts only when the set temperature is reached with SetpointWAIT function - Three freely selectable temperature calibration points for accurate settings - Refrigerant-free design with Peltier cooling for maximum energy efficiency and environmentally friendly operation - Adjustable electronic overtemperature monitor and mechanical temperature limiter for enhanced safety - Durable, corrosion-resistant stainless steel interior and textured stainless steel casing The Memmert IPP260eco Peltier-Cooled Forced Circulation Incubator 256L, 115V offers a substantial 256-liter capacity, making it ideal for laboratories that require precise temperature control for larger sample volumes. With a setting temperature range from 0°C to +70°C and an accuracy of 0.1°C, this incubator ensures consistent, reliable results across a variety of applications. The energy-efficient Peltier heating and cooling system, along with the ControlCOCKPIT digital PID-microprocessor controller and high-definition TFT-color display, allows for intuitive control and easy monitoring. The SetpointWAIT function ensures the process begins only when the target temperature is reached, enhancing accuracy and performance. This incubator is also environmentally friendly, featuring a refrigerant-free design that maximizes energy efficiency. The durable stainless steel interior and textured stainless steel exterior are corrosion-resistant, ensuring long-term durability in demanding lab environments. With the capacity to hold up to nine shelves and a maximum chamber load of 661 lbs, the IPP260eco is versatile enough to handle a wide range of samples. Safety is paramount, with an adjustable electronic overtemperature monitor, mechanical temperature limiter, and autodiagnostic system for fault analysis, providing peace of mind during operation. This incubator delivers superior performance with a focus on sustainability and reliability. INCLUDED: The Memmert IPP260eco Peltier-Cooled Forced Circulation Incubator 256L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IN160plus Natural Convection Incubator 161L, 115V Setting Temperature Range +20 to +80°C Co (more)nvection Type Natural Convection Chamber Volume 161 L (5.7 cu.ft.) Features - Set temperature range from min. 5°C above ambient up to +80°C, with a display resolution of 0.1°C for precise control - Control technology includes adjustable parameters such as temperature (Celsius or Fahrenheit), air flap position, program time, and daylight savings time - HeatBALANCE function adapts the heating distribution between upper and lower circuits from -50% to +50% for optimal performance - Fixed sterilization program (4 hours/160°C) for chamber sterilization (not for load sterilization) - AutoSAFETY system provides integrated over- and undertemperature protection with visual and audible alarms - Stainless steel interior with a volume of 161 L and a max chamber load of 462 lbs, offering robust durability - AtmoCONTROL software available for data logging, programming, and management via USB or Ethernet - High-quality textured stainless steel casing, scratch-resistant and durable, with dimensions of 29.3" x 43.5" x 23" The Memmert IN160plus Natural Convection Incubator 161L, 115V is designed for precision temperature control in demanding laboratory applications. With a working temperature range of min. 5°C above ambient up to +80°C, this incubator ensures consistent conditions for your samples. The twin Pt100 sensors in a 4-wire circuit provide accurate temperature monitoring, while the adaptive HeatBALANCE function allows for fine-tuned heat distribution between the upper and lower heating circuits. The sterilization feature, with a fixed 4-hour cycle at 160°C, ensures a sterile environment within the chamber, safeguarding the integrity of your work. Equipped with the advanced ControlCOCKPIT system, this incubator offers an intuitive interface with dual high-definition TFT displays, allowing users to adjust parameters such as temperature, air flap position, and program times. The durable stainless steel interior, reinforced with deep-drawn ribbing, provides 161 liters of internal volume and can support up to 462 lbs of total load. For seamless data management, the AtmoCONTROL software enables logging and program management via USB or Ethernet. The Memmert IN160plus combines innovation, safety, and durability, making it a top choice for precise incubation needs. INCLUDED: TheMemmert IN160plus Natural Convection Incubator 161L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Temperature range: Ambient +5°C to 100°C Temperature uniformity at 37°C: ±0.3 K Temperature uniformi (more)ty at 100°C: ±1.0 K Temperature fluctuation at 37°C: ±0.1 K Temperature fluctuation at 100°C: ±0.3 K Heating up time to 37°C: 55 min Heating up time to 100°C: 90 min Recovery time after door was opened for 30 s at 37°C: 15 min Load per rack: 30 kg Permitted load: 150 kg Capacity: 112 L Internal dimensions (WxHxD): 510 x 530 x 420 mm Dimensions (WxHxD): 710 x 705 x 605 mm Weight: 54 kg

Orbit Marine AL-7100-SDU-MK2 Servo Driver Unit This was removed from a university lab where it was  (more)surplus to requirements. It is in good cosmetic condition but has not been tested at our facility.

Thomson Linear Micron DuraTRUE 90 Right Angle Gearhead Ratio:250:1 Y-Axis This was removed from a un (more)iversity lab where it was surplus to requirements. The unit is in good cosmetic condition but has not been tested.

Ramp scale with stainless-steel load cells is intended for meat, fish, pharmaceutical, cosmetic and  (more)chemical industry. The scale is equipped with LD4N system allowing lifting the platform up, useful for maintenance purposes. The mechanism enables safe platform lifting and does not require physical exertion or additional equipment. Upon platform lowering, the scale is ready to carry out measurement. There is no need for recalibration. The scale is made of OH18N9 stainless steel and is equipped with PUE H315 indicator. On a customer request the scale can be made of steel of increased anti-corrosion resistance. The length of the cable for connecting the indicator to the platform - 3m. Ramp scale with LD4N system is equipped with only one ramp. Dual range weighing instrument for an additional charge. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.

E2-class mass standards represent an exceptional standard of precision in mass measurement. Classed  (more)as E2 metrology class, they are characterized not only by their high accuracy, but also by their versatility for use in laboratories, industry or scientific research. E2 class standard: flat polygonal sheet Nominal value: 2 mg Material: aluminum High Precision of measurements The mass standard is the foundation of accurate mass measurement, as it affects the quality and reliability of results in many areas. Its role in maintaining uniformity and in meeting measurement standards is crucial, making the mass standard an indispensable metrology component. Stability over Time An important feature of E2 class mass standards is their ability to maintain measurement stability over the long term. It is this stability that makes standards of this class highly valued in laboratories and industry. Calibration and Strict Quality Control Systematic calibration is a key element in maintaining E2 class standards. This process involves comparing the mass standard with other standards of known mass to confirm and maintain measurement accuracy. Versatility of Applications E2 class mass standards are designed for a wide variety of applications. They can be used in analytical laboratories, the pharmaceutical industry, scientific research or other areas requiring precise mass measurements. Applications 1. Analytical Laboratories In analytical laboratories, where precise and repeatable measurements are crucial, E2 class mass standards find their wide application. 2. Pharma Industry In drug manufacturing, where quality control plays a key role, E2 class mass standards are indispensable in the calibration process of balances. 3. Scientific Research In scientific research, especially in areas requiring the utmost precision, E2 class mass standards are an indispensable tool for obtaining reliable results. 4. Metrology Industry In metrology laboratories, E2 class standards provide a reference point for evaluating and testing other measurement standards. E2 class standards are synonymous with excellence in mass measurement. Their versatility and high precision make them an indispensable tool in laboratories around the world and improve the quality and reliability of mass measurement results.

Heidolph Hei-VAP Expert Control HL/G3B Coated Hand Lift w/ G3 XL Vertical GlasswareThe Hei-VAP Serie (more)s of rotary evaporators was developed with an emphasis on the essentials: well thought-out details with a focus on features and functions to facilitate everyday laboratory work. Hei-VAP Expert Control and Ultimate Control allow to centrally control all process parameters: vacuum, cooling temperature, rotation and heating bath temperature. Promising intuitive operation as all settings are configured centrally on the operating panel. In combination with the Control-Box, the panel can even be used as the central control unit to regulate the vacuum and the Hei-CHILL recirculation chiller as well. All Hei-VAP rotary evaporators have a safety heating bath with overheating and dry running protection, ergonomic handles, double wall and an integrated spout. Separate knobs with intuitive LED ring light system not only allow visual process control, but also direct intervention in the evaporation process at any time. The residual heat indicator operates when the function is deactivated and in standby mode, flashing and the display of the residual heat warn of the risk of burns (50 °C). Features: - 5" touch display - Clear display of all values (Basic/Advanced modes) - Timer - Max. temperature limitation - Multilingual menu with text alerts - Optional display of vapor temperature - USB and Micro SD plus LAN/RS 232 interfaces (Lab 4.0ready) - Control of any vacuum sources and Heidolph recirculation chillers - Solvent library - Favorites memory - Dynamic AUTOaccurate (DAA) - Ramp programming Click Here to View Product Video INCLUDED: The Heidolph Hei-VAP Expert Control HL/G3B Coated Hand Lift w/ G3 XL Vertical Glassware includes: - Heating Bath - G3B XL Vertical Glassware - Control Panel - 1 Liter Receiving Flask - 1 Liter Evaporating Flask - Vapor Tube - Vacuum Seal - Vacuum Valve - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

testo 110 Thermometer 0560 1108 with Waterproof probe (NTC) 0613 1212 0560 1108 Highly accurate even (more) at very low ambient temperatures, such as in cooling rooms Optional: connectable sensor and wireless sensor for various applications Audible alarm, adjustable limit values HACCP certified according to EN 13485 for use in the food sector Dimensions: 182 x 64 x 40 mm Operating temperature: -20 … +50 ° C Housing: ABS Number of Channels: 1 channel Battery Type: 9V battery Storage temperature: -40 … +70 ° C Weight: 171 g 0613 1212 – Waterproof immersion/penetration probe (NTC) with fixed cable 1.2m NTC temperature sensor Waterproof Measuring accuracy of up to ±0.2 °C Measuring range: -50 to +150 °C This unit is in excellent working condition and very clean cosmetically. Feel free to contact with any questions.